-
Chemstop™ NE246FFL
Product ID: NE246FFLHeat-resistant 18-inch extended-length chemical gloves for protection against caustics in maintenance tasks
Our Chemstop™ NE246FFL gloves are 18 inches long and offer protection against chemical and heat hazards. They’re made from neoprene for protection against a wide range of chemicals, including acids, caustics, and oil. A fleece liner provides ANSI 3 heat resistance for protection from thermal contact, plus they offer 360° cut protection with ANSI A3 cut resistance. Extended-length gloves provide extra arm coverage plus diamond-grip textured palms offer steady grip.
-
North Sea™ N230CR
Product ID: N230CRWaterproof chemical-resistant nitrile that stays flexible in cold conditions plus durability for long wear life
Our waterproof North Sea™ N230CR gloves are made with specially formulated nitrile that stays flexible in cold conditions for better range of motion and grip. Lined with cotton for warmth down to 5°C / 41°F, they resist oil, natural solvents, and water, making them ideal for work in fisheries or for tasks that require chemical protection in cold environments. The nitrile coating helps resist oil and other solvents and is textured for improved, steady grip on wet or oily surfaces.
-
Chemstop™ L8230
Product ID: L8230Comfortable hi-viz latex gloves with crinkle palm finish for better grip
Our Chemstop™ L8230 latex gloves offer a comfortable feel with a crinkle palm finish for better grip. These hi-viz orange gloves feature an anti-slip rough palm finish that ensures grip on wet surfaces, plus a sweat-wicking cotton liner for comfort.
-
Contender™ TRFGK
Product ID: TRFGKHeat and cut protection for fabrication and handling hot unfinished metal
Our Contender™ TRFGK gloves protect hands when handling hot unfinished metal and performing fabrication tasks. The ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A5 cut resistance and ANSI 5 heat protection. The loop out design and longer knit-wrist cuffs ensure comfort during material handling, and the cotton-blend fabric absorbs grease and oil for steady grip.
-
TenActiv™ SWTACSL
Product ID: SWTACSLHeavy-gauge metal fabrication gloves with cut protection
Our TenActiv™ SWTACSL gloves provide cut resistance and are thick for comfort when handling metal. TenActiv™ engineered yarn liner provides 360° cut protection with ANSI A6 cut resistance. Cotton lining wicks away sweat for a more comfortable fit. Ideal for sheet metal and material handling.
-
Sure Knit™ STNCF
Product ID: STNCFLint-free with electrostatic dissipative properties to protect electronics from contaminants and static charges
Our lint-free Superior Touch® STNCF gloves prevents contamination and feature electrostatic dissipative properties that ground energy to protect sensitive electronics. Made with carbon filament, they prevent static charges from building up, making them ideal for working with electronics. Latex-free construction limits the risk of allergic reactions and touchscreen compatibility helps to seamlessly move between tasks.
-
Sure Knit™ STN120HF
Product ID: STN120HFOpen-finger low-linting inspector gloves for the highest level of touch sensitivity
Our Sure Knit™ STN120HF inspector gloves feature an open-finger design for unobstructed touch sensitivity. Made from nylon for comfort, the finger openings are specially processed to prevent loose fibers from shedding material and help prevent contamination.
-
TenActiv™ STAGXPU
Product ID: STAGXPUCut-resistant low-linting knit with non-marring dry grip to prevent contamination
Our TenActiv™ STAGXPU low-linting gloves feature a light color to show dirt, stains, or other particulate matter and a non-marring polyurethane dip palm coating that protect surfaces by preventing contamination. Ideal for glass handling or final assembly, they are made with TenActiv™ engineered yarn that provides 360° cut protection with ANSI A6 cut resistance and the polyurethane palm coating offers steady dry grip with a bare hand feel.
-
TenActiv™ STAGPN
Product ID: STAGPNHigh cut protection and touchscreen compatibility with steady wet grip
Our TenActiv™ STAGPN gloves offer protection against cut hazards and are touchscreen compatible to seamlessly move between tasks. TenActiv™ engineered yarn provides 360° cut protection with ANSI A5 cut resistance plus micropore nitrile palm coating for a steady wet grip. They feature reinforced thumb crotch for protection against wear and tear.
-
TenActiv™ STAGCXPU
Product ID: STAGCXPUMaximum cut protection with dry grip and sense of feel that hides dirt and stains for longer wear life
Our TenActiv™ STAGCXPU gloves offer maximum cut protection with outstanding dry grip. TenActiv™ engineered yarn material provides 360° cut protection with extreme ANSI A9 cut resistance. Polyurethane palm dip coating for steady dry grip and tactile feel. Dark green knit hides dirt and stains to increase wear life.
-
TenActiv™ STAFGPU
Product ID: STAFGPUDurable cut-resistant everyday gloves with non-marring palms for dry grip and sense of feel
Our TenActiv™ STAFGPU gloves offer cut resistance with polyurethane palm coating for a stronger dry grip and tactile feel. The TenActiv™ engineered yarn liner provides 360° cut protection with high ANSI A5 cut resistance while non-marring palms are ideal for assembly, glass, and material handling.
-
TenActiv™ STAFGFNT
Product ID: STAFGFNTTouchscreen compatible moderate cut protection with a steady wet grip
Our TenActiv™ STAFGFNT gloves provide moderate cut protection with touchscreen compatible steady wet grip. TenActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance. Foam nitrile palm coating offers steady wet grip and touchscreen compatibility to seamlessly move between tasks. Ideal for general use work.
-
TenActiv™ STACXPURT
Product ID: STACXPURTCut-resistant with maximum abrasion and reinforced thumb crotch for extra durability and dexterity when material handling
Our maximum abrasion TenActiv™ STACXPURT gloves with polyurethane palm coating and nitrile reinforced thumb crotch add extra durability and dexterity when material handling. The TenActiv™ engineered yarn liner provides 360° cut protection with high ANSI A6 cut resistance. Touchscreen compatible non-marring gloves are suitable when dealing with finished metal and glass material.
-
TenActiv™ STACXPNRT
Product ID: STACXPNRTExtreme cut protection with reinforced nitrile thumb crotch for material handling and longevity
These gloves are made with TenActiv™ engineered yarn that provides 360° cut protection with extreme ANSI A7 cut resistance while a nitrile reinforced thumb crotch protects against wear and tear when material handling. Their micropore nitrile palm coating offers steady wet grip and is touchscreen compatible for moving between tasks.
-
Superior Touch® SSXPU3OF
Product ID: SSXPU3OFOpen-finger gloves with incidental cut protection for bare finger small parts handling and touchscreen operation
Our Superior Touch® SSXPU3OF open-finger gloves protect hands from incidental cut hazards while allowing workers to operate touchscreens and handle small parts. TenActiv™ engineered yarn provides 360° cut protection with low ANSI A2 cut resistance. The polyurethane palm dip coating offers a steady dry grip, making them ideal for small parts handling and assembly tasks.
-
Sure Grip® SQD
Product ID: SQDKnit gloves made with biodegradable and recycled materials plus dotted PVC palms for strong grip
Our Sure Grip® SQD string knit shell is made with biodegradable and recycled materials, plus dotted palms for a strong grip that is breathable and dexterous. Their cotton / polyester blend provides cool and comfortable all-day wear. The PVC dot palm coating offers steady grip that is more breathable and flexible than full coverage palms. Ideal for use in material handling, warehousing, and low-hazard general tasks.
-
Contender™ SPGRK4
Product ID: SPGRK4High heat protection with high cut resistance plus extended 4-inch cuffs for hot parts handling and injection molding
Our Contender™ SPGRK4 gloves protect against high cut and heat hazards, plus extended 4-inch cuffs offer wrist protection against heat hazards. Latex-free ParaActiv™ engineered yarn provides 360° cut protection with ANSI A6 cut resistance and high ANSI 4 heat protection that reduces the risk of allergic reactions. They feature extended 4-inch cuffs for wrist and forearm protection, making them ideal for injection molding and handling hot parts.
-
Cool Grip® SPGRK/A
Product ID: SPGRK/AProtection for handling moderately hot rubber and plastic
Our Cool Grip® SPGRK/A gloves keep workers’ hands protected while handling moderately hot material during rubber and plastic manufacturing. An acrylic liner adds comfort while the loop-in design prevents snagging on rough edges. These gloves feature a ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A6 cut resistance and ANSI 4 heat protection.
-
Contender™ SPGC2D
Product ID: SPGC2DHeat and cut protection for handling hot parts with double-sided PVC dots for breathable grip
Our Contender™ SPGC2D gloves protect against heat and cut hazards and feature double-sided PVC dots for breathable grip. Made with engineered yarn, they provide 360° cut protection with ANSI A4 cut resistance and ANSI 2 heat protection. A knit construction offers dexterity and comfort, making them ideal for handling hot parts while PVC dots along the palm and back of the hand offer steady grip that is more breathable and flexible than full coverage gloves. Latex-free to reduce the risk of allergic reactions, their ambidextrous design makes them reversible to increase wear life.
-
Contender™ SPGC
Product ID: SPGCCut protection with comfort for material handling
Our Contender™ SPGC gloves offer cut resistance with comfort when handling materials and parts where moderate cut hazards are present. Made with composite engineered yarn for 360° cut protection with ANSI A4 cut resistance, they feature a thicker 7-guage seamless knit for comfort when handling coarse material.
-
Cool Grip® SPFGSS
Product ID: SPFGSSMaximum heat protection with strategic silicone-striped palms for hot parts handling
Our Cool Grip® SPFGSS gloves offer maximum heat protection with silicone stripes on the palm for grip and comfort when handling hot parts. Made with latex-free materials, they provide 360° cut protection with ANSI A3 cut resistance and internally tested for protection beyond maximum ANSI 5 standards for extreme heat resistance up to 752°F / 400°C. Strategically placed silicone palm stripes increase grip and allow air channeling for additional heat resistance.
-
Superior® SNF
Product ID: SNFGlove liners for adding incidental cut protection and warmth
Our Superior® SNF gloves protect hands against minor scrapes and cold. Polyester knit provides 360° cut protection with ANSI A2 cut resistance and insulation to keep hands warm and comfortable. Can be worn on their own or as a liner under other safety gloves for extra warmth that protects against incidental cuts.
-
Cool Grip® SKX-W4
Product ID: SKX-W4Heat protection for handling heavy components in metal fabrication and stamping
Our Cool Grip® SKX-W4 gloves are designed for heavy-duty metal fabrication and stamping tasks. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance and internal testing verifies protection beyond maximum ANSI 5 standards for extreme heat resistance up to 752°F / 400°C. The wool liner traps air in and provides cushioning while protecting hands from thermal contact when handling heavy parts. Extended 4-inch cuffs provide additional protection to keep wrists safe.
-
Contender™ SKGCXPS
Product ID: SKGCXPSMaximum cut-resistant gloves for tasks that don’t require a strong grip
Our Contender™ SKGCXPS gloves are flexible and comfortable and offer maximum cut resistance. ParaActiv™ engineered yarn provides 360° cut protection with extreme ANSI A9 cut resistance. Reinforced thumb crotch stitching improves overall lifespan and protects against wear and tear.
Close