-
Dexterity® S18TAXFN
Product ID: S18TAXFNUltra-thin hi-viz maximum cut protection for better sense of touch and hand placement awareness
Our Dexterity® S18TAXFN hi-viz gloves provide maximum cut resistance in an ultra-thin form for a better sense of feel. TenActiv™ engineered yarn offers 360° cut protection with extreme ANSI A9 cut resistance, plus their foam nitrile palm coating provides steady wet grip and are touchscreen compatible to seamlessly move between tasks.
-
TenActiv Pro™ S13TAXFN
Product ID: S13TAXFNThin cut protection for better hand mobility plus steady wet grip when handling lightly oiled parts
Our cut-resistant TenActiv Pro™ S13TAXFN gloves are thin for hand mobility and offer a steady wet grip. TenActiv™ engineered yarn material provides 360° cut protection with high ANSI A5 cut resistance while foam nitrile palm coating offers steady wet grip when handling lightly oiled parts. Ideal for metal fabrication and sheet metal handling tasks.
-
KeepKleen® RDNMD
Product ID: RDNMDMetal-detectable disposable food handling gloves for accidental contamination detection
Our KeepKleen® RDNMD metal-detectable disposable gloves help reduce costs associated with accidental contaminations and food waste. A metal detector calibrated to standard sensitivity can detect pieces as small as 2 cm or 0.78 inches to prevent food waste shutdowns by adding and additional layer of control. They are suitable for food handling with texturized fingertips for steady grip.
-
Superior Glove® 635CRYO
Product ID: 635CRYOWaterproof protection for handling extremely cold cryogens
Designed for use around cryogens, these waterproof gloves are insulated with 3M Thinsulate™ which allows them to withstand contact with dry ice for 267 seconds. RaoTex™ inserts prevent cryogens from soaking through to the skin and act as an added insulator, trapping body heat while allowing moisture to escape. An extended cuff increases the area of protection while a looser fit allows for easy removal in the event of contact with cryogens.
-
Endura® 378GOBFC
Product ID: 378GOBFCCrush-resistant finger caps to protect fingers from pinch-point hazards
Our Endura® 378GOBFC gloves offer fingertip crush resistance to protect fingers from pinch-point hazards while still allowing flexibility and movement. Goatskin leather offers natural abrasion and a full cotton liner provides additional comfort. Treated to resist water and liquids, these gloves feature keystone thumb design to improve durability for a longer wear life.
To improve dexterity and comfort the finger cap is not included in the pinky finger.
-
Supera® Essentials WCKVFR
Product ID: WCKVFRInherently FR watch cap for soft-touch all-day wear and protection against fire hazards
Our fire-resistant Supera® WCKVFR watch cap is made with double-layer Kermel®-viscose blend to protect against fire hazards. Made with inherently fire-resistant material that won’t wash or wear out, the fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and arc flash-rated level 2 with an ATPV of 16 cal / cm², this watch cap is suitable for workers in industries where fire hazards exist, such as construction, mining, and oil and gas.
-
Supera® Essentials NWKVFR
Product ID: NWKVFRInherently FR neck warmer for soft-touch all-day wear and protection against fire hazards
Our fire-resistant Supera® Essentials NWKVFR neck warmer is made with double-layer Kermel®-viscose blend to protect against fire hazards. Made with inherently fire-resistant material that won’t wash or wear out, the fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and arc flash-rated level 2 with an ATPV of 16 cal / cm², this neck warmer is suitable for workers in industries where fire hazards exist, such as construction, mining, and oil and gas.
-
Supera® Essentials BAKVFR
Product ID: BAKVFRInherently FR balaclava for soft-touch all-day wear and protection against fire hazards
Our fire-resistant Supera® Essentials BAKVFR is a balaclava made with double layer Kermel®- viscose blend, protecting against fire hazards. Made with inherently fire-resistant material that won’t wash or wear out, the fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and ANSI CAT2; Ebt 16 cal/cm² rating, this balaclava is suitable for workers in industries where fire hazards exist such as construction, mining, and oil and gas.
-
Superior® GLVBELTCLIP
Product ID: GLVBELTCLIPConvenient glove clips to keep hand protection near
Gloves that are out of reach are gloves that don’t get worn. These convenient clips can be fastened and worn on any belt loop to keep your gloves close by. They include a built-in magnetic breakaway that safely releases gloves in case of snags or catches, adding extra peace of mind.
-
TenActiv™ STAGBPU
Product ID: STAGBPUBlack knit cut-resistant gloves that hide dirt and stains for longer wear life
Our TenActiv™ STAGBPU gloves are made from dark colored TenActiv™ engineered yarn to hide dirt and stains while protecting worker hands from cut hazards. The low-linting dark coloring allows these gloves to be used longer between laundering cycles, increasing their wear-life. They are ideal for work in unfinished or grimy environments where dirt is visible. Featuring moderate 360° cut protection with ANSI A4 cut resistance and polyurethane dipped palms for dry grip, they balance protection and comfort with a bare hand feel and dexterity.
-
ParaActiv Pro™ SCXPNTFC
Product ID: SCXPNTFCDouble-coated gloves for liquid protection and cut resistance
Our ParaActiv Pro™ SCXPNTFC gloves are double-coated cut protection for water and liquid resistance. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A5 cut resistance while the full hand coating protects against liquid penetration. A double-layer ¾ micropore nitrile palm coating offers steady wet grip, making these gloves ideal for metal fabrication and glass manufacturing.
-
Dexterity® S18TAGOFN
Product ID: S18TAGOFNSilicone-free low-linting hi-viz orange gloves with cut protection for hand placement and worker visibility
Our hi-viz orange Dexterity® S18TAGGFN gloves are silicone-free and low-linting, offering cut protection plus worker visibility and hand placement. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance. Their foam nitrile palms are non-marring and offer a steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel. They also feature a hi-viz orange shell for better hand visibility.
-
Dexterity® S18TAGGFN
Product ID: S18TAGGFNSilicone-free low-linting hi-viz green gloves with cut protection for hand placement and worker visibility
Our hi-viz green Dexterity® S18TAGGFN gloves are silicone low-linting, offering cut protection plus worker visibility and hand placement. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance. Their foam nitrile palms are non-marring and offer a steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel. They also feature a hi-viz green shell for better hand placement and worker visibility.
-
Dexterity® S18TAFGPU
Product ID: S18TAFGPUUltra-thin moderate cut protection for better hand movement with a bare hand feel and dry grip
Our Dexterity® S18TAFGPU gloves protect against cut hazards and offer a bare hand feel with dry grip and outstanding dexterity. TenActiv™ engineered yarn provides 360° cut protection with ANSI A5 cut resistance, while their polyurethane palm coating offers steady dry grip and tactile feel. Ideal for small parts handling, their white shell helps spot dirt and contamination.
-
Dexterity® S18TAFGNT
Product ID: S18TAFGNTLow-linting ultra-thin cut protection with specially formulated non-marring palm coating for longer wear life
Our low-linting Dexterity® S18TAFGNT gloves feature a specially formulated nitrile palm coating for better abrasion resistance to extend wear life. The non-marring nitrile palm coating provides steady wet grip that will not leave residue for product finishing. Made from TenActiv™ engineered yarn, they provide 360° cut protection with ANSI A4 cut resistance and their ultra-thin construction improves freedom of movement with a bare-hand feel.
-
Dexterity® S18TAFGFN
Product ID: S18TAFGFNUltra-thin and versatile cut protection for a wide range of tasks
Our versatile Dexterity® S18TAFGFN gloves are ultra-thin and suitable for food handling, with features for a wide range of operations. Made from electrostatic dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance while their foam nitrile palms are non-marring and offer steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel.
-
Dexterity® S18KGFN
Product ID: S18KGFNUltra-thin silicone-free touchscreen compatibly for protection against minor cut hazards
Our ultra-thin Dexterity® S18KGFN gloves are silicone-free and provides touchscreen compatibility plus protection against minor cut hazards. ParaActiv™ engineered material offers 360° cut protection with ANSI A3 cut resistance. The foam nitrile palm coating offers a steady wet grip and are touchscreen compatible to seamlessly move between tasks.
-
TenActiv™ S15TAFGPU
Product ID: S15TAFGPULow-linting gloves to prevent contamination with incidental cut protection and tactile dry grip
Our TenActiv™ S15TAFGPU low-linting gloves offer low cut protection to protect hands from incidental cut hazards. TenActiv™ engineered yarn provides 360° cut protection with ANSI A3 cut resistance, plus a polyurethane palm coating for steady dry grip and tactile feel. They’re low-linting to avoid shedding material and prevent contamination.
-
KnitActiv™ S15NT
Product ID: S15NTEarth-friendly cotton gloves with biodegradable nitrile palm coating
Our earth-friendly KnitActiv™ S15NT gloves are made with cotton that is comfortable to wear and naturally biodegrades. The nitrile palm coating is made with biodegradable additives and offers a steady wet grip for general use.
-
KnitActiv™ S13WPPU
Product ID: S13WPPUWhite polyester low-linting gloves for food machine maintenance with non-marring palms that show dirt and contamination
Our KnitActiv™ S13WPPU white polyester gloves are low-linting and non-marring to detect and prevent contamination during food machine maintenance. Non-marring polyurethane palm coating offers better dry grip and tactile feel that will not leave a residue, making them ideal for glassware and small parts handling. They are suitable for food handling.
-
TenActiv Max™ S13TAWFN
Product ID: S13TAWFNLatex-free maximum cut protection with wet grip for handling lightly oiled parts
Our latex-free TenActiv Max™ S13TAWFN gloves offer maximum cut protection and wet grip when handling lighly oiled parts. TenActiv™ engineered yarn material provides 360° cut protection with extreme ANSI A9 cut resistance. Made with latex-free materials to avoid allergic reactions, these gloves feature a foam nitrile hand coating for a steady wet grip.
-
TenActiv™ S13TAPUCF
Product ID: S13TAPUCFElectrostatic dissipative cut protection plus touchscreen compatibility for work with microelectronics
Our cut-resistant TenActiv™ S13TAPUCF gloves offer electrostatic dissipative properties that ground energy and are touchscreen compatible. TenActiv™ engineered yarn provides 360° cut protection with ANSI A2 cut resistance. Ideal for working with electronics, they are made with carbon filament for electrostatic dissipative properties to ground energy and prevent static charges from building up. They feature a polyurethane palm coating for a better dry grip and tactile feel, plus are touchscreen compatible to seamlessly move between tasks.
-
TenActiv™ S13TANT
Product ID: S13TANTCut protection with specially formulated non-marring palm coating for durability and longer wear life
Our TenActiv™ S13TANT gloves feature a specially formulated nitrile palm coating for better abrasion resistance to extend their wear life. Made from TenActiv™ engineered yarn, they provide 360° cut protection with ANSI A4 cut resistance while the nitrile palm coating provides steady wet grip that is touchscreen compatible to seamlessly move between tasks.
-
TenActiv™ S13TAGPU
Product ID: S13TAGPUNon-marring low-linting gloves for incidental cut protection plus tactile dry grip that won't leave residue
Our TenActiv™ S13TAGPU low-linting gloves offer low cut protection with non-marring palms for better dry grip and tactile feel that will not leave residue. TenActiv™ engineered yarn provides 360° cut protection with ANSI A2 cut resistance, plus a polyurethane palm coating for steady dry grip and tactile feel. They’re low-linting to avoid shedding material and prevent contamination.
