TenActiv™ STAGHVPUProduct ID: STAGHVPU
Cut-resistant gloves that offer high visibility and a tactile touch
A hi-viz knit shell gives these gloves an outstanding level of visibility on job sites, and their stronger-than-steel TenActiv™ yarn ensures ANSI Level A5 cut protection. Their shell has been made lint-free to avoid contaminants, and a polyurethane coating at the palms provides fingers with a tactile feel.
Contender™ SBKGProduct ID: SBKG
Black knit cut-resistant gloves that hide dirt and stains for longer wear life
Our Contender™ SBKG gloves are made from dark colored ParaActiv™ engineered yarn to hide dirt and stains while protecting hands from cut hazards. Featuring 360° cut protection with high ANSI A5 cut resistance, they offer a bare hand feel, dexterity, and are ideal for work in unfinished or grimy environments where dirt is visible.
Clutch Gear® MXGKGHVProduct ID: MXGKGHV
Hi-viz mechanic gloves with cut protection for material handling and visibility
Our Clutch Gear® MXGKGHV gloves feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A5 cut resistance for material handling. These hi-viz gloves feature leather wrapped fingertips and palms plus a hook and loop wrist closure for a snug, comfortable fit.
Superior® MLNFProduct ID: MLNF
Lightweight, fully washable, lint-free painter's gloves
These painter’s gloves are made from a lint-free nylon that optimizes them for any application where dust or particles may pose a concern, or when surfaces must be protected from scratches, oils, and fingerprints. They’re lightweight, comfortable, and feature a slip-on fit for easy on and off. Fully launderable, they can be easily refreshed after messy jobs.
Superior® ML80Product ID: ML80
Reversible inspector gloves designed for durability and dexterity
Thanks to their heavyweight cotton blend fabric, these inspector gloves enjoy a greater degree of durability without sacrificing the dexterity needed for close product inspection. They’re designed to be hand-to-hand reversible for greater ease of use and will form to the hand for a closer fit.
Superior® ML40Product ID: ML40
Lightweight, reversible inspection gloves
Made from a lightweight cotton blend, these inspection gloves provide ample dexterity while preventing the skin’s natural oils from coming into contact with the product. They’re designed to be worn on either hand for easier on/off and can also be worn as a liner under disposable latex or rubber gloves to improve comfort and absorb sweat.
Superior® LL80Product ID: LL80
Women's fit cotton/poly inspector gloves for contamination prevention
These breathable medium weight inspectors gloves are designed to protect against fingerprints, hand oils, scratches, and other types of contamination. The cotton/poly jersey knit fabric is very form-fitting, and the slip-on style allows for easy donning. Hand-to-hand reversible, which helps to extend the life of the glove, they can also be worn as a liner beneath other gloves to soak up perspiration; especially effective when worn underneath rubber gloves. These gloves are also fully washable and can be No Bleached.
Ground Hog™ 14012GHProduct ID: 14012GH
Eliminate paint spray-back with this cleanroom compatible glove
Grounding yourself to a spray gun can be comfortable and functional when your hands are inside these solvent-resistant, cleanroom-compatible gloves. The secret? A highly conductive silver strip that runs along the inside surface of the palm to deliver the best possible grip. In addition, a double-faced hemmed cuff and lint-free materials keep particulate counts to the lowest possible level.
Endura® 66QProduct ID: 66Q
Highly durable, split-leather fitter gloves
These durable fitter gloves don’t skimp on safety. They’re made from heavyweight split-leather and feature leather reinforcement at the palms, index fingers and thumbs. Gunn-cut styling eliminates exposed seams from the palm area, and slightly extended cuffs provide a higher zone of coverage.
Endura® 505KGWSProduct ID: 505KGWS
Arc/Stick welding gloves with full forearm protection and 360° cut resistance
Extra-long gauntlets provide these stick welding gloves with a generous amount of protection from heat and sparks, and their DuPont™ Kevlar® fiber lining delivers 360° ANSI Level A5 cut protection, ANSI Level 5 puncture resistance, and and ANSI Level 2 heat resistance. Their choice cowhide construction, one-piece backs and wide thumb straps with split patches boost durability. Sewing thread is made with Kevlar® fiber for added seam integrity.
Endura® 505BUProduct ID: 505BU
Durable, extended gauntlet Stick/Arc welding gloves with superior heat protection
These gloves are made with choice, rugged cowhide selected from the shoulder-split for the highest level of durability. A wide thumb strap further reinforces durability. Sewing thread is made with Kevlar® fiber for added seam integrity and heat resistance. Extended gauntlet cuffs further safeguard hands from sparks and heat.
Endura® 399GKGL5Product ID: 399GKGL5
All-round fabrication and MIG welding glove with arc flash protection
Our Endura® 399GKGL5 goatskin gloves are ideal for MIG welding and all-round fabrication use. Made with material designed to resist flame, these gloves are arc flash-rated level 3 with an ATPV of 36 cal / cm² and feature ParaActiv™ thread for added seam integrity and durability. They also feature a ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A4 cut resistance and ANSI 3 heat protection while extended gauntlet cuffs provide extra wrist protection.
Endura® 375CSIProduct ID: 375CSI
Strength and functionality with built in oil and water resistance
These Endura® gloves are a testament to the strength and functionality of cowgrain leather. They’re built from top-grain leather that’s both smooth and dexterous, tough and long-lasting, with built in oil and water resistance. Supportive grain leather at the palms ensures long-lasting use and gauntlet cuffs provide a high level of coverage while allowing for a comfortable, easy fit.
Endura® 370GFKLProduct ID: 370GFKL
MIG welding gloves with fine touch sensitivity
Our Endura® 370GFKL goatskin MIG welding gloves balance cut and heat protection with touch sensitivity. These gloves feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with low ANSI A² cut resistance and ANSI 3 heat protection and spark resistance while extended gauntlet cuffs provide extra wrist protection.
Endura® 370CTIGProduct ID: 370CTig
TIG welding gloves with heat protection that balances flexibility and durability
Our Endura® 370CTIG TIG welding gloves are made from goatskin leather to provide an ideal balance between durability and hand motion that protect against sparks and heat. They provide ANSI ² heat resistance and feature ParaActiv™ thread for added seam integrity and durability. Extended gauntlet cuffs provide extra wrist protection against heat and sparks.
Endura® 365HBRProduct ID: 365HBR
Highly dexterous, durable TIG welding gloves that resist heat up to 140°C / 284°F
Built extra-tough from cowhide and featuring 4″ cowhide gauntlets that protect the wrists, these welding gloves provide a high level of protection while remaining highly flexible for precise work. They provide heat resistance in temperatures up to 140°C / 284°F. Sewing thread is made with Kevlar® fiber for added seam integrity that increases resistance to sparks and long lasting wear.
Endura® 335DTIGProduct ID: 335DTig
Enhanced dexterity and sense of touch for precise TIG welding
The fineness and flexibility of deerskin provides an enhanced sense of touch and optimal dexterity, which makes these gloves a perfect match for the most precise welding jobs. 4″ gauntlet cuffs and heat protection of up to 140°C / 284°F also ensures adherence to the highest safety standards. Sewing thread is made with Kevlar® fiber for added seam integrity. Equipped with strapped thumbs, these are durable, long-lasting gloves you can count on.
Endura® 335CBPProduct ID: 335CBP
TIG welding gloves that can take the heat
These reverse cowhide TIG welding gloves feature reinforced back patches to maximize protection from sparks. Sewing thread is made with Kevlar® fiber for added seam integrity. Rated for heat resistance up to 260°C / 500°F, complete with strapped thumbs and an extended cowhide gauntlet, safety is at the heart of their design. Gunn-styling assures that these gloves are as comfortable as they are tough.
Endura® 76YBDQProduct ID: 76YBDQ
Sweat absorbing, everyday gloves with added forearm protection
These tough work gloves are built for everyday use and feature top-grain cowhide leather for protection from minor abrasions and scrapes. Inside lining at the palm increases comfort while absorbing sweat to provide a strong, steady grip, while 2.5″ safety cuffs increase coverage to protect forearms.
Endura® 76GRProduct ID: 76GR
Scrape and abrasion-resistant driver gloves with added forearm protection
These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. 4.25″ rubberized gauntlet cuffs increase their zone of coverage, and a light resistance to water and oil further boosts their versatility. The addition of an absorbent cotton palm lining keeps hands dry.
Endura® 76BFTLProduct ID: 76BFTL
Scrape and abrasion-resistant driver gloves that keep hands warm down to -15°C / 5°F
These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. A bandtop cuff allows hands to slide in and out with ease, and Thinsulate™ lining offers winter protection in temperatures down to -15°C / 5°F.
Emerald CX® SKWCPLPProduct ID: SKWCPLP
360° cut resistance and a strong, steady grip
A strong grip meets high cut resistance in the form of these string knit gloves, which feature a DuPont™ Kevlar® stainless steel composite yarn blended with polyester that provides 360° ANSI Level A6 cut protection. Their leather palms increase comfort and durability, while providing a strong, steady grip on lightly oiled metal which makes these gloves ideal for handling heavy metal parts as well as glass or sharp objects.
Cool Grip® SKPX/PSSProduct ID: SKPX/PSS
360° cut protection matched with superior flame and spark resistance
Made from a blend of DuPont™ Kevlar® fiber and Protex® yarns that provide 360° ANSI Level A4 cut protection and ANSI Level 5 heat resistance, these 7-gauge double-layer gloves are a perfect match for any job that presents cut hazards in high heat. Silicone strips at the palm increase their grip and heat resistance, and inner gloves made from high-bulk polyester give them a soft, comfortable fit.
Cool Grip® SCPSCLPProduct ID: SCPSCLP
Metal fabrication and foundry gloves with cushioning for comfort when handling many hot parts
Our Cool Grip® SCPSCLP gloves are ideal for metal fabrication and foundry when handling hot parts for an extended amount of time. These cotton / nylon gloves feature durable leather palms with a SilaChlor® layer that provides ANSI 5 heat protection for the palms for sustained handling of handling hot material and painted parts. The ANSI A3 cut resistant leather palms also offer cushioning when carrying heavy parts and absorbs oil for better grip.