Leather

Our Endura® 399GCXTL5 all-round fabrication gloves offer the industry’s highest cut and puncture resistance plus protection against cold temperatures. ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A9 cut resistance and maximum ANSI 5 puncture protection. They feature a Thinsulate™ lining to keep hands warm in temperatures down to -15°C / 5°F, and their extended gauntlet cuffs provide additional protection to wrists and forearms.

Our cut-resistant Endura® 378GTAXOT gloves protect hands from cut hazards and feature hi-viz orange fingertips for visibility. TenActiv™ engineered yarn liner provides 360° cut protection with ANSI A6 cut resistance while hi-viz orange fingertips offer worker visibility on the job and hand placement awareness.

Our Endura® 361GTLVB mitts feature back of hand impact resistance to protect hands against knocks and bumps and are cold-rated for temperatures down to -35°C / -31°F. Leather is treated to resist liquids while the knit cuffs to help keep out dirt, debris, and environmental hazards. Finger slots in the mitts help reduce hand fatigue when handling material.

Our Endura® 378GOTXVB gloves are liquid resistant and feature TenActiv™ engineered yarn liners to provide 360° cut protection with ANSI A6 cut resistance. These gloves are unpadded for a better sense of touch and wider range of motion, making them ideal for maintenance work or climbing ladders and gripping handrails in oil and gas. The reinforced back-of-hand bumpers protect against knocks and bumps without inhibiting freedom of movement.

Our Endura® 399GKGL5L gloves are designed with a slim fit for comfort and are ideal for MIG welding and all-round fabrication use. ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance and ANSI 3 heat protection. They are arc flash-rated level 3 with an ATPV of 36 cal / cm². Abrasion resistant goatskin leather and durable keystone thumbs optimize these MIG welding gloves for the long haul, while 6-inch gauntlet cuffs provide extra coverage where heat hazard exists.

Our Vibrastop™ VIBGHFV gloves feature an open finger design with leather palms that contain engineered vibration dampening material. The open fingers provide the highest level of touch sensitivity while the palms protect against vibrations from repetitive impact. Adjustable straps support the wrist, offering a snug fit and comfort.

Our Endura® 361DLX6 lineman mitts feature hi-viz 6-inch cuffs with retroreflective tape for better visibility. Made from durable leather, they feature double-leather palm patches in high-wear areas to protect against wear and tear.

Our Endura® 399GTXTL5 gloves offer cut and cold protection along with extended gauntlet cuffs. TenActiv™ engineered yarn provides 360° cut protection with ANSI A6 cut resistance and features a liner for cold protection down to -10°C / 14°F. Their wing thumb design adds extra durability and comfort, plus 6-inch gauntlet cuffs provide additional protection to wrists and forearms.

Our Endura® 398HG2 gloves are made from a hybrid of four different leathers to optimize each hide’s best quality and improve glove performance. The gloves feature ANSI 2 heat protection with horsehide palms for durability, while the back-of-hand and fourchettes are made from pliable goat and sheep leather for flexibility and comfort. 2-inch split-leather cow leather cuffs provide wrist protection and easy donning and removal. Ideal for utility and line maintenance tasks that require heat and abrasion protection.

Our Endura® 305ENLB TIG welding gloves provide protection for long welding sessions that require more touch sensitivity for precise work. Featuring ANSI 2 heat protection, the elk leather palms provide a thinner shell for better dexterity and sense of feel that doesn’t sacrifice durability. Back-of-hand liner provides additional ambient heat resistance and spark protection for long welding sessions. Sewn with ParaActiv™ thread for added seam integrity and extended gauntlet cuffs provide additional wrist safety.

Our TenActiv™ STAGBLPVB gloves feature ErgoHyde leather palms that provide improved hand movement and more grip than typical leather. TenActiv™ engineered yarn provides 360° cut protection with extreme ANSI A8 cut resistance, plus hi-viz back-of-hand bumpers offer improved hand placement visibility and ANSI 2 impact protection. Treated to resist water and liquids, their ErgoHyde palms offer an outstanding range of motion plus strong grip in wet conditions.

Our Endura® 378GTXOTL winter gloves feature hi-viz fingertips and cut protection along with insulation to protect against temperatures down to -30°C / -22°F . The TenActiv™ engineered yarn liner provides 360° cut protection with high ANSI A6 cut resistance. Their strategically placed, patent pending palm strips increase grip and reduce bunching.

Our Endura® 398OBPB MIG welding gloves feature double-layered maximum ANSI 5 hypodermic puncture protection on the thumb and index finger on the off-hand to guard against common welding wire injuries. The off-hand glove also features a single-layer palm liner for additional ANSI 3 hypodermic puncture protection. Both off-hand and tool-hand gloves are lined with ParaActiv™ engineered yarn for 360° cut protection with ANSI A4 cut resistance and ANSI 4 heat protection. Sewn with ParaActiv™ thread for added seam integrity and treated to resist water and liquids, these gloves feature padded palms and cuffs for comfort and protection when welding. Sold in left-handed (398OBPBLH) and right-handed (398OBPBRH) off-hand versions.

Our Endura® 378GAHVB gloves offer hi-viz retroreflective back of hand for better visibility and hand placement. Flexible knit back features a hi-viz stripe for visibility while goatskin leather palms help improve dexterity and durability for a longer wear life. The pull-on style allows ease of donning and features an elasticized back for a snug fit.

Our Clutch Gear® MXGKGHTVB mechanics style gloves protect against multiple hazards while keeping hands warm down to -20°C / -4°F. Made from TenActiv™ engineered yarn to provide 360° cut resistance with ANSI A5 cut protection, they feature hi-viz back-of-hand ANSI A2 impact resistance for protection against knocks and bumps. The leather palm provides extra durability and synthetic back-of-hand improves flexibility and comfort.

Our Endura® 385CS hi-viz gloves are specially designed to stop a running chainsaw in its tracks. Eight layers of woven ParaActiv™ fiber wraps around a chainsaw’s drive sprocket to halt it at the moment of contact. Palm patches offer better grip and adjustable elasticized wrist closures provide secure fit and keeps debris out.

Our Endura® 505BU stick welding gloves offer heat protection and feature extended gauntlet cuffs to protect wrists from welding hazards. These gloves offer ANSI 2 heat resistance to reduce heat transfer, plus sewing thread is made with ParaActiv™ fiber for added seam integrity. They feature reinforced thumb patches for extra durability while extended gauntlet cuffs provide forearm protection against sparks, heat, and abrasion.

Our Endura® 378KGTVB goatskin gloves protect against multiple types of hazards while keeping hands warm down to -20°C / -4°F. Ideal for outdoor cold protection, they feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A5 cut resistance and impact protection against knocks and bumps. These gloves are treated to resist water and liquids, while the padded palms enhance comfort when material handling.

Our Endura® 378GKGVBG feature padded palms for comfort when material handling and offer protection against cuts and impacts . TenActiv™ engineered yarn liner provides 360° cut resistance with ANSI A6 cut protection plus back-of-hand ANSI 2 impact resistance guards against knocks and bumps. Extended gauntlet cuffs provide additional wrist safety.

Our arc flash-rated Endura® 375KGTVB gloves offer cut resistance along with warm insulation to protect against temperatures down to -10°C / 14°F. The ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A5 cut resistance plus arc flash level 3 protection with an ATPV of 25 cal / cm². Back of hand ANSI 2 impact protection guards against knocks and bumps. They feature a Thinsulate™ liner for warmth and comfort and are treated to resist water and liquids. Extended gauntlet cuffs provide extra wrist and forearm protection.

Our Endura® 370CTIG TIG welding gloves are made from goatskin leather to provide an ideal balance between durability and hand motion that protect against sparks and heat. They provide ANSI 2 heat resistance and feature ParaActiv™ thread for added seam integrity and durability. Extended gauntlet cuffs provide extra wrist protection against heat and sparks.

Our Endura® 365DLX6 lineman gloves feature a hi-viz 6-inch cuff for better visibility. Made from durable horse leather, they feature a double-leather palm patches in high-wear areas to protect against wear and tear and are treated to repel water, oil, and stains.

Our Endura® 335DTIG TIG welding gloves offer heat protection and are designed to provide better range of motion and touch sensitivity. Featuring ANSI 2 heat resistance, the supple deerskin leather offers better dexterity and sense of feel than traditional leather. They’re sewn with ParaActiv™ fiber for added seam integrity and feature extended 4-inch gauntlet cuffs for wrist and forearm protection against sparks and slag.

Our Endura® 76GR fitter style gloves are reinforced with grain leather and feature 4.25-inch rubberized cuffs for liquid resistance and protection when handling material. Grain leather palms, fingertips, and knuckle straps protect against scrapes and abrasion while providing resistance to liquids.

Our Cool Grip® SCPSCLP gloves are ideal for metal fabrication and foundry when handling hot parts for an extended amount of time. These cotton / nylon gloves feature durable leather palms with a SilaChlor® layer that provides ANSI 5 heat protection for the palms for sustained handling of handling hot material and painted parts. The ANSI A3 cut resistant leather palms also offer cushioning when carrying heavy parts and absorbs oil for better grip.

Our heat-resistant Endura® 398KGLBG MIG welding gloves feature extended cuffs to protect workers from sparks and offer cut resistance for handling material. ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance while back-of-hand fleece lining offers ANSI 2 heat resistance. Dark coloring hides dirt and stains for a longer wear life, plus extended 6-inch cuffs offer added wrist and forearm protection. Padded palm patches offer further comfort when material handling.

Our hi-viz Endura® 378GOTTL gloves protect hands from extreme cold temperatures and offer hand visibility. Thinsulate™ lining keeps hands warm down to -25°C / -13°F while goatskin leather offers natural abrasion resistance and flexible hand movement. Their keystone thumb design helps improve dexterity and durability for a longer wear life and the hi-viz orange fingertips offer worker visibility and hand placement awareness.

Our Endura® 378GOBTKL goatskin gloves keep hands warm down to -15°C / 5°F and are ideal for non-energized work where arc flash is present and resistance to liquids is a must. Made with material designed to resist flame, they are arc flash rated level 4 with an ATPV of 49 cal / cm², offer ANSI 2 heat resistance, and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A5 cut resistance. These gloves are liquid resistant and the palms are unpadded for steady grip and a better sense of feel when performing tasks.

Our Endura® 378GKGTL goatskin gloves provide protection from high cut hazards and keep hands warm down to -15°C / 5°F. Ideal for outdoor winter site clean-up and metal fabrication, these gloves feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A6 cut resistance and an additional Thinsulate™ liner for warmth and comfort in extreme cold.

Our Endura® 378GKTA gloves provide durable protection from scuffs and scrapes, making them ideal for material handling, light construction tasks, and low hazard site clean up. The keystone thumb design maximizes durability for a longer wear life while the elasticized wrists offer a snug fit for all day comfort.

Our Endura® 378GKGE goatskin gloves are an economic choice that protects against arc flash and cuts. Made with material designed to resist flame, they are arc flash-rated level 3 with an ATPV of 36 cal / cm² and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with moderate ANSI A4 cut resistance.

Our Endura® 378A gloves provide durable protection from scuffs and scrapes, making them ideal for material handling, light construction tasks, and low hazard site clean up. The keystone thumb design maximizes durability for a longer wear life while the elasticized wrists offer a snug fit for all day comfort.

Our Endura® 361DLXFTL lineman mitts are designed to keep hands warm in winter weather down to -20°C / -4°F. The combination of a claw design along with a Thinsulate™ liner provides both warmth and comfort in frigid temperatures. Made from durable horse leather, they feature double-leather palm patches in high-wear areas to protect against wear and tear. These mitts are treated to repel water, liquids, and stains and feature extended cuffs with hi-viz bands.

Our Endura® 69BSKFFL fitter style gloves offer protection against cut hazards and abrasion for a long wear life. TenActiv™ engineered yarn liner provides 360° cut protection with ANSI A5 cut resistance. They feature reinforced premium split-leather and are sewn with ParaActiv™ thread for added seam integrity to increase durability for a long wear life.

Our Endura® 378GKGVB goatskin gloves provide multi-hazard protection for heavy machine operation and maintenance, where resistance to liquids is a must. Made with material designed to resist flame, they are arc flash-rated level 3 with an ATPV of 33 cal / cm², offer ANSI 5 heat resistance, and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A5 cut resistance. Treated to resist water and liquids, they feature impact protection against knocks and bumps and padded palms for comfort when material handling.

Our hi-viz Clutch Gear® MXGKGHVTL gloves feature cut protection and cold resistance down to -20°C / -4°F without compromising dexterity and range of motion. The TenActiv™ engineered yarn liner provides 360° cut protection with high ANSI A5 cut resistance. Leather wrapped fingertips and goat-skin palms provide improved durability.

Our green hi-viz Endura® 378GHVTL gloves protect against extreme cold temperatures with Thinsulate™ lining to keep hands warm down to -30°C / -22°F. The back-of-hand material offers flexibility and comfort plus features retroreflective striping for hand placement awareness and worker visibility on the job. Goatskin leather palms help improve dexterity and durability for a longer wear life.

Our Vibrastop™ VIBGV gloves are designed to offer protection against high-frequency vibration hazards. Made with vibration-dampening material, they feature an orange back-of-hand material for better flexibility and comfort, while their leather palms offer improved durability for a longer wear life. An adjustable wrist strap provides a snug fit for comfort.

Our Endura® 365DLXTKG gloves offer cold protection and cut resistance along with 6-inch cuffs for added wrist protection. The ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance along with hi-viz bands on cuffs for visibility. The Thinsulate™ lining keeps hands warm in cold temperatures down to -15°C / 5°F.