-
Endura® 378GKTFG
Product ID: 378GKTFGDurable arc flash-rated gloves with high cut protection for longer wear life
Our Endura® 378GKTFG gloves protect hands from flash fires and are made from premium goatskin for added durability and a longer wear life. Arc flash-rated level 3 with an ATPV of 36 cal / cm², they offer ANSI 3 heat resistance and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A5 cut resistance.
-
Endura® 378GKTA
Product ID: 378GKTADurable goatskin gloves for low hazard protection and material handling
Our Endura® 378GKTA gloves provide durable protection from scuffs and scrapes, making them ideal for material handling, light construction tasks, and low hazard site clean up. The keystone thumb design maximizes durability for a longer wear life while the elasticized wrists offer a snug fit for all day comfort.
-
Endura® 378GKGE
Product ID: 378GKGEEconomic choice for flash fire protection with cut resistance
Our Endura® 378GKGE goatskin gloves are an economic choice that protects against arc flash, cuts, and flame. Made with material designed to resist flame, they are arc flash-rated level 3 with an ATPV of 36 cal / cm² and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with moderate ANSI A4 cut resistance.
-
Endura® 378AFL
Product ID: 378AFLClose-fitting, hard-wearing winter driving gloves
These winter driver gloves are made from tough cowgrain leather that resists abrasions, repels water and will form to the hands over time for a closer, comfortable fit. The keystone thumb design maximizes durability and dexterity, while elasticized backs make the fit snug yet flexible. A full fleece lining provides fingers with much-needed warmth in winter conditions.
-
Endura® 378A
Product ID: 378ADurable cowhide gloves for low hazard protection and material handling
Our Endura® 378A gloves provide durable protection from scuffs and scrapes, making them ideal for material handling, light construction tasks, and low hazard site clean up. The keystone thumb design maximizes durability for a longer wear life while the elasticized wrists offer a snug fit for all day comfort.
-
Endura® 361DLXFTL
Product ID: 361DLXFTLCold-rated lineman mitts that keep hands warm down to -20°C / -4°F
Our Endura® 361DLXFTL lineman mitts are designed to keep hands warm in winter weather down to -20°C / -4°F. The combination of a claw design along with a Thinsulate™ liner provides both warmth and comfort in frigid temperatures. Made from durable horse leather, they feature double-leather palm patches in high-wear areas to protect against wear and tear. These mitts are treated to repel water, liquids, and stains and feature extended cuffs with hi-viz bands.
-
Endura® 304BOA
Product ID: 304BOADurable mitts built for extreme cold weather protection down to -35°C / -31°F
The solution to cold fingers lies inside these durable mitts built from tough cowgrain that offer protection in temperatures down to -35°C / -31°F. They’re lined with layers of pillow-soft insulation that trap heat inside and have elasticized wrists that prevent cold air from entering. As a bonus, a pair of helpful metal clips allow the mitts to be bound together when not in use.
-
Emerald CX® SCXLX
Product ID: SCXLXThe ultimate in cut and abrasion resistance combined with a strong grip
A latex palm coating provides these gloves with an excellent dry grip, while a blend of DuPont™ Kevlar® fiber, Wire-Core™ steel and polyester ensures ANSI Level A5 cut protection. For added safety, these gloves also provide ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance.
-
Chemstop™ NIF3018
Product ID: NIF3018Chemical and puncture resistant gloves that provide a wide area of protection
Thanks to a nitrile coating, these 15mil thick gloves resist a wide range of chemicals and solvents including oil, fuel and methanol. Their embossed finish provides a steady grip and flock lining ensures comfort. An extended 12″ length provides a greater zone of coverage and ANSI Level A3 puncture resistance further protects hands.
-
Chemstop™ NE250TRC
Product ID: NE250TRCChemical resistant, extended cuff gloves that guard against heat up to 204°C / 400°F
These heavy-duty neoprene gloves provide protection against a wide range of oil and chemicals that attack natural rubber gloves, including acids, caustics, oils and grease. They will also tolerate brief exposure to flame, hot water contact up to 204°C / 400°F and feature ANSI Level 3 heat resistance. Terry lining and extended cuffs provide further protection from thermal contact while diamond-grip finished palms ensure a strong, steady grip.
-
Clutch Gear® MXVSB
Product ID: MXVSBImpact-resistant hi-viz mechanic gloves for small parts handling
Our hi-viz Clutch Gear® MXVSB gloves offer back of hand ANSI 2 impact resistance that won’t sacrifice dexterity. Strategically placed patches on the palm and fingertips provide better grip and durability. Reinforced thumb crotches increase wear resistance in critical areas. The adjustable hook and loop wrist closure to provide a snug and comfortable fit while adding an extra layer of protection.
-
Endura® 378GAX
Product ID: 378GAXAbrasion resistant driver gloves crafted with comfort in mind
Stretchy Spandex backs make these driving gloves highly flexible and breathable. Their wing thumb design increases flexibility and provides a closer, more comfortable fit. Goatskin palms deliver a higher degree of abrasion resistance to the areas that need it most, and a gunn cut pattern increases the gloves’ lifespan by eliminating the need for seams in high-wear areas.
-
Dexterity® SKFGFNVB
Product ID: SKFGFNVBCut protection with incidental impact resistance plus foam nitrile palms for steady wet grip
Our Dexterity® SKFGFNVB gloves protect against cut hazards and incidental knocks and bumps. ParaActiv™ engineered yarn provides 360° cut protection with moderate ANSI A4 cut resistance plus back-of-hand bumpers with ANSI 1 impact protection. A foam nitrile palm coating offers a steady grip in wet or oily conditions.
-
Superior Touch® S13SXGPU
Product ID: S13SXGPUCFIA-compliant gloves that match strength with touch sensitivity
These CFIA-compliant gloves are made from Dyneema®, a fabric that’s 15 times stronger than steel yet so light that it floats on water. The palms feature a polyurethane coating that enhances grip, touch sensitivity, and comfort. Their non-marring quality makes them an ideal choice when working with glass, and they’re fully washable for easy cleaning.
Superior Glove™, a leading Manufacturer & Wholesale Supplier of Work & Safety Gloves & Arm Sleeves. FREE SAMPLES. Wide Variety of Styles & Materials.