Low Hazard Gloves
-
Clutch Gear® MXGCETFL
Product ID: MXGCETFLHere's how you handle the cold stuff - our Winter-lined Goatskin Mechanics Glove
Superior Glove was founded in Canada, so of course we know winter. Designed for harsh cold climates, these gloves feature a goatskin leather palm with split leather patches and thumb crotch for durability and excellent abrasion resistance. Thin, light, and warm C100 Thinsulate™ insulation helps our gloves achieve a -20C/-4F rating.
-
Endura® 304BOA
Product ID: 304BOADurable mitts built for extreme cold weather protection down to -35°C / -31°F
The solution to cold fingers lies inside these durable mitts built from tough cowgrain that offer protection in temperatures down to -35°C / -31°F. They’re lined with layers of pillow-soft insulation that trap heat inside and have elasticized wrists that prevent cold air from entering. As a bonus, a pair of helpful metal clips allow the mitts to be bound together when not in use.
-
Endura® 378AFL
Product ID: 378AFLClose-fitting, hard-wearing winter driving gloves
These winter driver gloves are made from tough cowgrain leather that resists abrasions, repels water and will form to the hands over time for a closer, comfortable fit. The keystone thumb design maximizes durability and dexterity, while elasticized backs make the fit snug yet flexible. A full fleece lining provides fingers with much-needed warmth in winter conditions.
-
Endura® 378GHVTL
Product ID: 378GHVTLHi-Viz built-tough gloves that provide winter protection down to -30°C / -22°F
These built-tough goatskin gloves provide ultimate visibility even in trying conditions thanks to yellow hi-viz and Scotchlite™ retro-reflective stripes on the back of the hand. Thinsulate™ lining ensures that hands stay warm in temperatures down to -30°C / -22°F . Elasticized backs make sure that the fit secure.
-
Endura® 378GKTTL
Product ID: 378GKTTLComfortable, abrasion resistant gloves that keep hands warm down to -15°C / 5°F
A cut-and-sewn construction and elasticized backs allow these driver gloves to offer a close and comfortable fit. The natural abrasion-resistance of goatskin combined with a keystone thumb design ensures long-lasting durability, while a 100g Thinsulate™ lining keeps hands warm in temperatures down to -15°C / 5°F.
-
Endura® 378GOBDTK
Product ID: 378GOBDTKPuncture-resistant, oil and water repelling gloves for work in extreme cold
Intended for use in extreme cold, these driver gloves are made from a tough goat-grain leather that provides ANSI Level 4 puncture resistance. They feature a Thinsulate™ lining to keep hands warm in temperatures down to -30°C / -22°F. An Oilbloc™ treatment provides a high level of oil resistance while a Waterstop™ treatment repels oil, water and stains. Furthermore, a knitwrist turtleneck cuff extension locks in warmth.
-
Endura® 378GOTTL
Product ID: 378GOTTLHi-Viz goatskin driver gloves that keep hands warm down to -30°C / -22°F
These winterized, close-fitting driver gloves have hi-viz orange fingertips that improve safety by making hands and fingers highly visible even in trying conditions. They’re built from high-tensile, abrasion-resistant goatskin, and feature a keystone thumb design that maximizes durability. 100g of Thinsulate™ lining keeps hands warm and safe in temperatures down to down to -30°C / -22°F.
-
Endura® 66BRBOA
Product ID: 66BRBOADurable split-fitter gloves with extra wrist protection and a warm, winter-proof lining
These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers and are reinforced at the fingertips to offer a higher level of protection to the areas that need it most. Safety is further enhanced by knuckle straps and 2.5″ rubberized safety cuffs improve wrist protection while allowing for an easy fit. All-over lining provides warmth and comfort in cold conditions.
-
Endura® 678GDTLK
Product ID: 678GDTLKGloves that keep hands warm and dry to -45°C / -49°F
Designed for workers whose hands are more vulnerable to the cold due to less physical exertion in their everyday work, these winter gloves are designed to retain warmth down to -45°C (-49°F). In addition to their double-weight Thinsulate™ lining, these gloves feature a waterproof membrane to keep hands dry in damp conditions. These gloves also features a touchscreen index fingertip.
-
Endura® 76BFTL
Product ID: 76BFTLScrape and abrasion-resistant driver gloves that keep hands warm down to -15°C / 5°F
These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. A bandtop cuff allows hands to slide in and out with ease, and Thinsulate™ lining offers winter protection in temperatures down to -15°C / 5°F.
-
SnowForce™ SNOWD200L
Product ID: SNOWD200LInsulated gauntlet gloves that provide winter protection down to -45°C / -49°F
Designed with arctic winters in mind, these calfskin gloves provide crucial warmth in extreme cold. Their Temperloc lining ensures winter protection in temperatures down to -45°C / -49°F and can be easily removed for cleaning and drying. Elasticized wrists lock in heat and keep cold out, and their 6.5″ double layer nylon gauntlet cuffs have been designed to slide over snowmobile suits and parkas. They even feature a removable cheek warmer and pile wiper.
Leather Gloves
-
Clutch Gear® MXGKGHVTL
Product ID: MXGKGHVTLHigh visibility mechanic gloves with 360° cut resistance and winter protection down to -15°C / 5°F
Thanks to a laminated spandex backing featuring hi-viz foam, these mechanic gloves combine a high level of visibility with a wide range of flexible motion. Leather wraps at the fingertips and tough goat-grain palms increase their durability, and a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A5 cut protection. Their wide elastic straps with hook and loop closures allow for a fit that’s snug yet comfortable, and C100 Thinsulate™ lining keeps fingers warm in temperatures down to -15°C / 5°F.
-
Endura® 378GKGDT
Product ID: 378GKGDT360° cut resistant gloves that keep hands warm down to -20°C / -4°F
These versatile goat grain gloves benefit from ultra-warming C200 Thinsulate™ lining, which provides a double layer of insulation to guarantee warmth down to temperatures of -20°C / -4°F. At the same time, a keystone thumb ensures comfort and durability, and DuPont™ Kevlar® fiber lining provides 360° ANSI Level A5 cut resistance and ANSI Level 5 puncture resistance.
-
Endura® 378GKGTL
Product ID: 378GKGTLWinter gloves for extreme cold where high cut hazards are present
Our Endura® 378GKGTL goatskin gloves provide protection from high cut hazards and keep hands warm down to -30°C / -22°F. Ideal for outdoor winter site clean-up and metal fabrication, these gloves feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A6 cut resistance and an additional Thinsulate™ liner for warmth and comfort in extreme cold.
-
Endura® 378GOBTKL
Product ID: 378GOBTKLCold-rated arc flash protection with cut resistance that resists oil and water
Our Endura® 378GOBKL goatskin gloves keep hands warm down to -15°C / 5°F and are ideal for non-energized work where arc flash is present and oil resistance is a must. Made with material designed to resist flame, they are arc flash rated level 4 with an ATPV of 52 cal / cm², offer ANSI 2 heat resistance, and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A5 cut resistance. These gloves are treated with Oilbloc™ to resist oil and water, while the palms are unpadded for steady grip and a better sense of feel when performing tasks.
-
Endura® 378GTXOTL
Product ID: 378GTXOTLProtection, warmth, and comfort coexist
For users in cold/winter environments, we’ve created the first leather driver gloves to feature a TenActiv™ liner that is cool to the touch, softer, more comfortable, and more breathable than other liner materials. These gloves feature ANSI A6 cut resistance as well as ANSI Puncture Level 4. They also incorporate our patent pending palm-grip technology to improve dexterity and durability.
Knit Gloves
-
Dexterity® SNTAPVCD
Product ID: SNTAPVCDDeep winter string-knit gloves keep hands warm down to -20°C / -4°F
Our Dexterity® SNTAPVCD gloves feature a soft fleece lining with doubleweight insulated fingers that ensure hands stay warm in temperatures down to -20°C / -4°F. Its water-repellent, ¾ dip palm coating prevents these gloves from stiffening in wet and freezing conditions, making them an excellent choice for jobs involving contact with snow.
-
Dexterity® SKG/PXNE
Product ID: SKG/PXNEArc Flash rated gloves that stand up to heat and cold
The combination of DuPont™ Kevlar® fiber and Protex® yarns provides these gloves with 360° ANSI Level A5 cut resistance and ANSI Level 4 heat resistance. Their lining ensures that hands stay warm in temperatures down to -5°C / 23°F, and a flame-resistant neoprene palm coating provides a strong, steady grip in wet or dry conditions. They’re capable of offering protection from heat in temperatures up to 260°C / 500°F and feature a level 3 Arc Flash rating.
-
Dexterity® SNTAPVC
Product ID: SNTAPVCA highly dexterous glove that provides winter protection down to -5°C / 23°F
These lightweight, water-repellant gloves feature a soft fleece lining that keeps hands warm in temperatures down to -5°C / 23°F. A micropore PVC coating provides a high level of flexibility even in sub-zero temperatures, and a palm coating ensures a strong, steady grip. Quick-drying capabilities make them even more versatile.
-
Dexterity® SNTAPVCFB
Product ID: SNTAPVCFBWater repellant gloves that keep hands warm down to -5°C / 23°F
All-over PVC coating prevents these water-repellant gloves from stiffening in wet and freezing conditions, making them an excellent choice for any job involving contact with snow. Their soft fleece lining ensures hands stay warm in temperatures down to -5°C / 23°F, and their light weight and quick-drying properties provide maximum comfort.
-
Dexterity® TKTAGLX
Product ID: TKTAGLXWater-resistant winter gloves with a strong, steady grip
These cut resistant, insulated gloves are optimized for mild-winter work. Constructed from a blend of terry and high-performance polyethylene that ensures ANSI Level A3 cut protection and ANSI Level 4 puncture resistance, their napped lining keeps hands warm in temperatures down to -5°C / 23°F without adding bulk. An orange backing improves visibility.
-
Emerald CX® SCXTAPVC
Product ID: SCXTAPVCHigh 360° cut protection gloves that keep hands warm and dry down to -5°C / 23°F
A blended knit made from DuPont™ Kevlar® fiber and steel provides these gloves with 360° ANSI Level A5 cut protection, while a soft fleece lining offers warmth in temperatures down to -5°C / 23°F. A PVC palm coating ensures a strong, steady grip in wet or dry conditions, and touchscreen compatibility adds convenience.
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNWaterproof cut-resistant gloves that keep hands warm down to -10°C / 14°F
This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ knit assures ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
Chemical Gloves
-
Chemstop™ S15KGVNFVB
Product ID: S15KGVNFVBHi-Viz chemical resistant gloves that protect against cuts and keep hands warm down to -5°C / 23°F
Featuring impact-resistant back-of-hand protection, chemical-resistant PVC and full aramid fiber lining that ensures ANSI Level A6 cut protection, these fleece-lined winter gloves guard against a wide variety of risks. Their fleece lining ensures that hands stay warm in temperatures down to -5°C (23°F), and a nitrile coating provides a secure grip on even wet and slippery surfaces. Gauntlet cuffs increase wrist safety and hi-viz backs offer enhanced visibility.
-
North Sea™ N230CR
Product ID: N230CROil resistant gloves that maintain a steady grip in cold conditions
Designed with commercial fishing in mind, these gloves feature a nitrile coating that resists oils and fuel and stays flexible even in extremely cold conditions. Their sand-patch grip channels ensure a steady grip on wet or oily surfaces, and cotton jersey support improves comfort while absorbing sweat. They feature ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance.
-
North Sea™ N230FL
Product ID: N230FLFishing gloves with extra wrist coverage that provide winter protection down to -15°C / 5°F
These gloves are ideal for winter fishing thanks to a nitrile coating that ensures flexibility even in extreme cold and a winter-fleece lining that keeps hands warm in temperatures down to -15°C / 5°F. They feature ANSI Level 6 abrasion resistance and ANSI Level 3 puncture resistance, along with sand-patch grip panels that provide a secure grip on wet and oily surfaces. Their cotton jersey support increases comfort by absorbing sweat while 11″ gauntlet cuffs keep wrists covered.
-
North Sea™ N230FLK
Product ID: N230FLKFleece-lined fishing gloves that provide winter protection down to -15°C / 5°F
These gloves are ideal for winter fishing thanks to a nitrile coating that ensures flexibility even in extreme cold and a winter-fleece lining that keeps hands warm in temperatures down to -15°C / 5°F. They feature ANSI Level 6 abrasion resistance and ANSI Level 3 puncture resistance, as well as sand-patch grip panels that provide a secure hold on wet and oily surfaces. Knit wrist cuffs improve comfort and keep water out.
-
North Sea™ NS330
Product ID: NS330Chemical-resistant gloves that keep hands safe in cold conditions
These chemically resistant gloves feature a PVC formulation that gives them outstanding flexibility and ensures that they won’t stiffen or crack in cold temperatures. Rough-finished palms provide a sturdy grip even in wet, slippery conditions. They’re also CFIA-compliant for safe food handling.
-
North Sea™ NS230PU
Product ID: NS230PUChemical-resistant gloves that keep hands warm down to -15°C / 5°F
Our North Sea™ NS230PU gloves protect against chemicals, liquids, and oils and feature a fleece liner that keep hands warm down to -15°C / 5°F. The polyurethane coating provides flexibility and an improved sense of feel, while textured palms offer grip, especially in wet, slippery conditions.
Linesman Gloves
-
Endura® 361DLXFTL
Product ID: 361DLXFTLCold-rated lineman mitts that keep hands warm down to -20°C / -4°F
Our Endura® 361DLXFTL lineman mitts are designed to keep hands warm in winter weather down to –20°C / -4°F. The combination of a claw design along with a Thinsulate™ liner provides both warmth and comfort in frigid temperatures. Made from durable horse leather, they feature a double-leather palm patches in high-wear areas to protect against wear and tear. These mitts are treated to repel water, oil, and stains and feature extended cuffs with hi-viz bands.
-
Endura® 361DLXWL
Product ID: 361DLXWLA one finger lineman mitt built tough for extreme cold (-45°C / -49°F)
These heavy-duty mitts built from specially selected horsehide leather are wool lined for warmth in temperatures down to -45°C / -49°F. Their gauntlet cuffs are marked by retroreflective silver strips and a hi-viz overlay to assure maximum visibility. Sewing thread is made with Kevlar® fiber for added seam integrity. A leather performance patch at the palm makes them extra-hard wearing, and a removable, washable lining makes it easy to keep them fresh and clean.
-
Endura® 365DLX2TL
Product ID: 365DLX2TLDurable, high visibility lineman gloves for warmth down to -10°C / 14°F
These heavyweight horsehide leather gloves feature retroreflective silver strips along their 2″ cuffs for enhanced visibility. Flexible Thinsulate™ lining provides cold-proofing in temperatures down to -10°C / 14°F . Sewing thread is made with Kevlar® fiber for added seam integrity. A reinforced leather palm provides this high-use area with extra strength. Treated to resist water, oil and stains.
-
Endura® 365DLXDTL
Product ID: 365DLXDTLHi-Viz lineman gloves built for warmth down to -15°C / 5°F
200 grams of flexible Thinsulate™ lining allow these heavyweight horsehide gloves to perform and protect in temperatures down to -15°C / 5°F without sacrificing mobility. A Waterstop™ treatment effectively repels water and oils. 3M™ Scotchlite™ retroreflective silver strips located on the 6″ cuffs ensure enhanced visibility. Sewing thread is made with Kevlar® fiber for added seam integrity. And reinforced palms provide a high level of durability.
-
Endura® 365DLXFTL
Product ID: 365DLXFTLTough linemen gloves for high visibility and warmth down to -10°C / 14°F
These heavyweight horsehide leather gloves feature retroreflective silver strips along their 6″ gauntlet cuffs for enhanced visibility, and benefit from flexible Thinsulate™ lining that cold-proofs them in temperatures down to -10°C / 14°F. Sewing thread is made with Kevlar® fiber for added seam integrity. Reinforced leather at the palm provides this high-use area with extra strength. Treated to resist water, oil and stains.
-
Endura® 365DLXTKG
Product ID: 365DLXTKGHigh visibility, extended cuff lineman gloves with 360° cut protection
These heavyweight cowgrain leather gloves benefit from DuPont™ Kevlar® fiber for 360° cut protection that meets ANSI Level A4 . The 6″ gauntlet cuffs feature two 3M™ retroreflective silver strips enhanced by high-viz bands, meeting the ANSI/ISEA 107-2015 standard for high visibility. They provide an excellent level of water, oil and stain resistance, and feature split-leather at the cuffs. They are also Thinsulate™-lined for winter protection in temperatures down to -15°C / 5°F.
Impact Gloves
-
Chemstop™ S15KGVNFVB
Product ID: S15KGVNFVBHi-Viz chemical resistant gloves that protect against cuts and keep hands warm down to -5°C / 23°F
Featuring impact-resistant back-of-hand protection, chemical-resistant PVC and full aramid fiber lining that ensures ANSI Level A6 cut protection, these fleece-lined winter gloves guard against a wide variety of risks. Their fleece lining ensures that hands stay warm in temperatures down to -5°C (23°F), and a nitrile coating provides a secure grip on even wet and slippery surfaces. Gauntlet cuffs increase wrist safety and hi-viz backs offer enhanced visibility.
-
Endura® 378TXTVBG
Product ID: 378TXTVBGWinter gloves with multi-hazard protection for handling heavy materials and operating tools
Our multi-feature Endura® 378TXTVBG gloves combine 360° cut protection, impact resistance, and vibration-dampening palms with the warmth of Thinsulate™ to keep hands safe while fighting cold temperatures down to -25°C / -13°F. We’ve also added gauntlet cuffs for wrist and forearm protection. Designed for the oil and gas industry, these gloves provide multi-hazard protection that is ideal for handling heavy parts and materials and for operating tools.
-
Endura® 375KGTVB
Product ID: 375KGTVBDriving gloves that offer exceptional grip and winter warmth down to -10°C / 14°F
The DuPont™ Kevlar® fiber/ composite filament lining within these tough goatskin driver gloves provides 360°ANSI Level A5 cut protection and ANSI Level 4 puncture protection. Thinsulate™ lining keeps hands warm in temperatures down to -10°C / 14°F and an Oilbloc™ treatment assures the highest level of oil and water resistance. Reinforced materials at the back of the hand protect the grip without inhibiting freedom of movement.
-
Endura® 378GKGTVBE
Product ID: 378GKGTVBEVibration-dampening driver gloves with 360° cut resistance and winter protection down to -25°C / -13°F
These high-performing winter driver gloves are made from built-tough goatskin lined with Thinsulate™️ for winter protection in temperatures down to -25°C / -13°F. Their TenActiv™️ lining provides 360° ANSI Level A6 cut protection, and a padded palm reduces vibration to improve grip. Impact-resistant inserts at the back of the hand guard against knocks and bumps without compromising flexibly.
-
Endura® 378KGTVB
Product ID: 378KGTVBCold-rated multi-hazard protection with cut resistance, padded palms, and oil resistance
Our Endura® 378KGTVB goatskin gloves protect against multiple types of hazards while keeping hands warm down to -20°C / -4°F. Ideal for outdoor cold protection, they feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A5 cut resistance and impact protection against knocks and bumps. These gloves are treated with Oilbloc™ to resist oil and water, while the padded palms provide vibration dampening and enhance comfort when material handling.
-
Endura® 378KMT4P
Product ID: 378KMT4POur most feature-packed winter glove to protect against impact, cuts and cold
These tough goatskin multi-hazard driver gloves feature our 4PRO™ back-of-hand protection to deliver maximum impact resistance that doesn’t compromise mobility, even in freezing cold temperatures. The lining is made with DuPont™ Kevlar® fiber which provides 360° cut protection and ANSI Level A6 cut resistance. These feature-packed gloves also include vibration-dampening palms and are treated with Oilbloc™ to repel water and oil.
Apparel
-
SUPERA™ FR BAKVFR
Product ID: BAKVFRNon-irritating fire-resistant balaclava for reliable protection against fire hazards
Our SUPERA™ BAKVFR is a balaclava made with double layer Kermel®- viscose blend, protecting against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and ANSI CAT2; Ebt 16 cal/cm² rating, this balaclava is suitable for workers in industries where fire hazards exist such as construction, mining, and oil and gas.
-
SUPERA™ FR NWKVFR
Product ID: NWKVFRFire-resistant neck gaiter that is ultra soft and non-irritating for all-day comfort
This fire-resistant (FR) neck gaiter is designed for maximum comfort and all-day wear with a two-layer Kermel®-viscose blend that is non-irritating and feels soft against the skin. Even better, the fabric’s inherent FR properties won’t diminish with laundering, allowing for easy refresh between uses. It’s an excellent choice for construction, mining, utility work, and jobs that involve oil and gas. It’s both NFPA 70E compliant and CAT2; Ebt 16 cal/cm².
-
SUPERA™ FR WCKVFR
Product ID: WCKVFRFire-resistant watch cap that is ultra soft and non-irritating for all-day comfort
This fire-resistant (FR) cap is designed for maximum comfort and all-day wear with a two-layer Kermel®-viscose blend that is non-irritating and feels soft against the skin. Even better, the beanie is made of a fabric with inherent FR properties that won’t diminish with laundering, allowing for easy refresh between uses. It’s an excellent choice for construction, mining, utility work, and jobs that involve oil and gas. It’s both NFPA 70E compliant and CAT2; Ebt 16 cal/cm².
-
SUPERA™ SXNMCM12
Product ID: SXNMCM12Waterproof socks with Coolmax™ liners wick away moisture to keep feet comfortable and dry
These socks include a breathable, waterproof membrane that eliminates the risk of water soak-though without sacrificing comfort. Their Coolmax™ liner wicks away moisture, and a seamless knit reduces the stress on seams while further improving comfort.