-
TenActiv™ STXWLPNVB
Product ID: STXWLPNVBWaterproof winter gloves with impact bumpers and nitrile palm for better wet grip and high cut protection
High cut gloves with impact resistant bumpers on the back of hand and micropore nitrile palm coating for better oily, wet grip in outdoor winter work. The acrylic fleece lining provides winter warmth in combination with the thin TenActiv shell to provide flexibility and high cut resistance while protecting against harsh weather elements such as wind, water, and slush. Ensuring both sides of the hands are protected, the back of hand bumpers provides high impact protection while the nitrile palm coating provides high abrasion resistance. Ideal for working in outdoor, high cut and impact hazard conditions where protecting your hands against harsh weather elements is also required.
-
TenActiv™ S21TXUFNLTC
Product ID: S21TXUFNLTCMaximum cut protection with reinforced thumb crotch for durability
Our TenActiv™ S21TXUFNLTC gloves provides the industry’s highest level of cut protection in a thin 21-gauge knit for a barehand feel. They feature a reinforced leather thumb crotch for added durability and wear making them ideal extreme cut hazard tasks that require added abrasion resistance. The ultra-thin foam nitrile palm coating is touchscreen compatible and provides a strong, steady grip when working in lightly oiled conditions.
-
TenActiv™ S21TXUGFN
Product ID: S21TXUGFNUltra-thin with maximum cut protection
Our hi-viz TenActiv™ S21TXUGFN gloves are silicone-free and deliver the industry’s highest level of cut protection in a thin 21-guage knit. With a barehand feel, they offer high durability without sacrificing flexibility which makes them ideal for asks with rish of extreme cut hazards that also requires a high level of dexterity. The ultra-thin foam nitrile palm coating provides a strong, steady grip in lightly oiled conditions, all while being touchscreen compatible.
-
TenActiv™ STXPNRVB
Product ID: STXPNRVBHi-viz gloves with extreme cut protection and impact resistance for high hazard environments
Our TenActiv™ STXPNRVB feature both a TenActiv™ engineered yarn knit for extreme cut resistance and back-of-hand impact protection against knocks and bumps. Designed to perform in any environment that presents a high level of cut and impact hazards, they also feature a hi-viz color for visibility and worker hand placement while micropore nitrile palms offer a steady wet grip.
-
Dexterity® S18ND
Product ID: S18NDEconomical choice for low-hazard general purpose use that requires grip
Our Dexterity® S18ND work gloves are an economical but durable choice for general labor. The palms are dotted to provide a more breathable and dexterous grip than a full palm coat, making them comfortable enough for all-day use.
-
TenActiv™ STXWPNVB
Product ID: STXWPNVBBreathable waterproof and windproof gloves with impact resistance
Our TenActiv™ STXWPNVB work gloves are waterproof and windproof to protect skin from harsh environments while remaining breathable. The unique membrane lamination prevents layers from slipping, providing a comfortable fit and reliable grip. TenActiv™ yarn offers ANSI Level A6 cut resistance with 360° cut protection while the impact-resistant, back-of-hand protection safeguards hands from moderate impact hazards while remaining dexterous. They also feature a micropore nitrile palm-coating at the palm ensures grip when handling parts in lightly wet or oily conditions.
-
Superior Touch® S13SXPU
Product ID: S13SXPULint-free Dyneema knit glove with a firm grip
Our Superior Touch® S13SXPU gloves provide delicate tactility for handling small components. Knit with lint-free Dyneema®, they protect against contaminant fibers without sacrificing cut and abrasion protection. These ergonomic, breathable gloves ensure versatility and precision with a strong grip, making them a great choice for hands-on work in electronics, glass, food, and manufacturing.
-
TenActiv™ S21TXUFN
Product ID: S21TXUFNThe world’s thinnest glove with maximum cut protection and steady grip
The Tenactiv™ S21TXUFN is the world’s first 21-gauge glove to deliver the highest-level of cut protection. With a barehand feel, it also provides both durability and puncture protection without sacrificing flexibility. The ultra-thin nitrile palm coating offers a strong grip that won’t slip, all while being touchscreen compatible.
-
Superior Touch® CS13SXPUQ
Product ID: CS13SXPUQCleanroom-processed lint-free gloves for precision work
Our cleanroom-processed Superior Touch® CS13SXPUQ gloves are ideal for highly sensitive finishing environments where tasks require fine motor skills. Knit with lint-free Dyneema®, they protect against contaminant fibers and provide 360° light cut protection. These ergonomic breathable gloves ensure precision, making them ideal when working with electronics, glass, manufacturing, and pharmaceutical products.
-
Dexterity® S13NSI
Product ID: S13NSINon-Marring Gloves that Resist Adhesives, Liquid, and Heat
Our Dexterity® S13NSI gloves are a durable, high tactility option for resisting the stickiest of adhesives, repelling liquids, and protecting hands from heat due to the silicone palm coating. These ultra-thin gloves also maximize workers’ sense of touch while protecting materials like glass and metal from fingerprints thanks to their non-marring coating.
-
Superior Touch® S18ULPFN
Product ID: S18ULPFNUltra-Thin High-Tactility for Assembly and Inspection Work
Our Superior Touch® S18ULPFN gloves maximize touch and improve grip while protecting the hands from minor common hazards associated with assembly and inspection. The ultra-thin, lightweight shell and our thinnest palm coating offer a high level of dexterity to easily feel, grip, and manipulate small parts like nuts, bolts, clips, and plastic components.
-
Dexterity® S15GPNVB
Product ID: S15GPNVBComfortable, cut resistant gloves with back of hand protection
These gloves match ANSI Level A5 cut protection with impact-resistant back of hand protection that delivers ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance. Their micropore nitrile coating resists liquids and oils to keep hands dry and features suction cup-like craters for a strong grip in any conditions. A snug fit and ergonomic shaping deliver all day comfort.
-
TenActiv™ STAGCTPU
Product ID: STAGCTPUGloves designed with zones that tear away to avoid hazardous snags in fast-moving rotational equipment
When working around rotating equipment, gloves can be a safety hazard. If a glove is snagged, a user can easily be put at risk of a hand or arm injury. For these environments, our STAGCTPU gloves were designed with 12 tear-away zones intended to tear in case of snagging. These gloves also offer well-rounded protection, including ANSI Level A5 cut resistance and ANSI Level 4 Puncture resistance. They are also designed for dexterity and comfort, providing a high level of touch-sensitivity.
-
Chemstop™ S15KGVNVIB
Product ID: S15KGVNVIBHigh-performing vibration dampening with well rounded mechanical protection and dexterity
Our new S15KGVNVIB gloves are designed specifically for workers who face vibration hazards from use of heavy power tools. With 17 individual vibration dampening pads strategically placed in high-risk areas, these gloves offer protection where it’s needed most while maintaining a high level of comfort and dexterity. These gloves also provide 360° ANSI Level A5 cut protection and feature a two-layer palm dip for increased durability and a water-tight seal.
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNWaterproof cut-resistant gloves that keep hands warm down to -10°C / 14°F
This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ knit assures ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ S18WTFN
Product ID: S18WTFNWaterproof 360° cut-resistant gloves for handling lightly oiled parts
These waterproof gloves provide unbeatable protection from harsh elements due to an exclusive breathable waterproof and windproof membrane. They’re also useful for handling parts soaked in oil or cutting fluids. Their unique membrane lamination prevents layers from slipping in addition to a nitrile palm coating that provides a strong, steady grip. Their TenActiv™ knit provides 360° ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ S18TAXFN
Product ID: S18TAXFNHi-Viz cut protection with a strong grip and barehand feel
These touchscreen-compatible gloves made with TenActiv™ provide ANSI Level A6 cut protection, ANSI Level 4 abrasion resistance, and ANSI Level 3 puncture resistance. Their 18-gauge knit conforms to the hand for a high level of flexibility and a tactile feel, while their hi-viz color increases visibility. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions.
-
TenActiv™ S13TAXFN
Product ID: S13TAXFNTough knit gloves with a strong grip that guard against abrasion, cuts, and punctures
Intended for use in metal manufacturing, these tough knit gloves are made from a blend of steel, TenActiv™, and composite filament-fiber that provide ANSI Level A5 cut protection. Their foam nitrile palm ensures a strong, steady grip on wet or lightly oiled surfaces in addition to ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance.
-
TenActiv™ STAGBPU
Product ID: STAGBPUDurable, cut resistant gloves with a strong grip and bare hand feel
These gloves are knit from a non-linting continuous filament yarn that’s stronger than steel and provides ANSI Level A4 cut protection. Their palms are coated with polyurethane that increases grip and adds a bare-hand feel. Thanks to a black coloration that hides dirt, you won’t have to wash them between every job. Made with latex-free materials to limit the risk of allergic reactions.
-
TenActiv™ S18TAFGPU
Product ID: S18TAFGPUHigh dexterity, cut-resistant gloves with enhanced comfort and a strong grip
These 18-gauge knit gloves feature a polyurethane coating that enhances dexterity and a bare-hand feel while also providing a strong and comfortable grip. Their naturally cool TenActiv™ yarn prevents hands from overheating while offering ANSI Level A4 cut protection. These gloves are an outstanding choice for jobs that require working with small parts where a strong grip is required.
-
TenActiv™ S18TAFGFN
Product ID: S18TAFGFNStatic-blocking gloves with a soft, tactile feel and a strong grip
These 18-gauge knit gloves are made from a lint-free, continuous filament yarn that’s stronger than steel but conforms to the hand for an unparalleled level of dexterity. Their nitrile palm coating provides a strong, durable grip that becomes closer fitting over time. Treated with an active agent to achieve a 99.9% antimicrobial status, while electrostatic dissipative properties defuse static, making these gloves a great choice for working with electronics.
-
TenActiv™ S15TAFGPU
Product ID: S15TAFGPUCut resistant, versatile gloves with a strong grip and barehand feel
A high level of dexterity and ANSI Level A3 cut resistance optimizes these 15-gauge gloves for a wide variety of tasks. They’re made from a lint-free, continuous filament yarn and feature a polyurethane palm coating that provides a strong grip while allowing for a sensitive, bare-hand feel. Their ergonomic shaping, snug fit and breathable construction ensure all-day comfort.
-
TenActiv™ S13TAPUCF
Product ID: S13TAPUCFTouchscreen compatible, cut resistant gloves that block static
Perfect for electronics manufacturing, these gloves are made from a 13-gauge TenActiv™-blended yarn that provides ANSI Level A2 cut protection, and also benefits from anti-static carbon filament. It’s polyurethane palm coating ensures a steady grip, and its touchscreen compatible design adds convenience.
-
TenActiv™ S13TAGPU
Product ID: S13TAGPUStronger-than-steel gloves with high cut resistance
Made from a lint-free continuous filament yarn that’s stronger than steel yet highly flexible, these TenActiv™ gloves provide outstanding dexterity. They feature ANSI Level 4 abrasion resistance, 360° ANSI Level A2 cut protection, and ANSI Level 3 puncture resistance. Polyurethane-coated palms ensure a secure grip and ergonomic shaping increases comfort.
