DuPont™, the DuPont Oval Logo, and all trademarks and service marks denoted with ™, ℠ or ® are owned by affiliates of DuPont de Nemours, Inc. unless otherwise noted. © 2021 DuPont.

Show Filters

ORDER BY

PRODUCT TYPE

ABRASION

ARC FLASH

CHEMICAL

COLD

CUT

CRUSH

HEAT

FLAME

IMPACT

VIBRATION

PUNCTURE (HYPODERMIC)

PUNCTURE (BLUNT PROBE)

FEATURES + TECH

MATERIAL

PALM COATING

PALM COATING DIP TYPE

CUFF STYLE

Show Filters
ORDER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE
  • Endura® 370DTIGL

    Product ID: 370DTIGL

    TIG welding gloves designed for a lady's hands for better fit and protection

    Deer skin TIG welding gloves sized for ladies are designed with a cushioned patch on the pinky side to improve longevity and comfort while welding, and sewn with DuPont™ Kevlar® fiber to reduce the likelihood of getting burnt out when exposed to heat. The deer skin leather provides a high combination of durability, dexterity, and a fine sense of touch without forfeiting flexibility.

  • Endura® 399GKGTL5

    Product ID: 399GKGTL5

    Moderate cut protection with extended gauntlet cuffs and protection from cold down to -20°C / -4°F

    Our Endura® 399GKGTL5 gloves feature a ParaActiv™ liner that provides 360° cut protection with ANSI A4 cut resistance. They keep hands warm in temperatures down to -20°C / -4°F, and their 6″ gauntlet cuffs provide additional protection to wrists and forearms. Designed to conform to hands for a closer fit and more dexterity.

  • Endura® 361DLXTKG

    Product ID: 361DLXTKG

    Lineman mitts with 360° cut resistance that keep hands warm down to -15°C / 5°F

    These cowgrain leather mitts meet the ANSI/ ISEA 107-2015 standard for high visibility, thanks to cuffs that feature 3M™ retroreflective silver strips and high-viz bands.

    They’ve been treated with Waterstop™ to repel water and oil, and their Thinsulate™ lining retains warmth down to temperatures of -15°C / 5°F.

    Durability is assured through double-leather palm patches in high-wear areas. Lined with DuPont™ Kevlar® fiber, these mitts provide 360° cut protection.

  • Endura® 365DLX2TKG

    Product ID: 365DLX2TKG

    Cold-rated lineman gloves with cut protection and 2-inch hi-viz cuffs

    Our Endura® 365DLX2TKG lineman gloves feature cut resistance and cold protection. ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A4 cut resistance and 2-inch cuffs with hi-viz retroreflective bands provide better visibility. They are also Thinsulate™-lined for cold protection in temperatures down to -15°C / 5°F.

  • Endura® 365DLX6KG

    Product ID: 365DLX6KG

    Cut-resistant lineman gloves with extended hi-viz cuffs for visibility

    Our Endura® 365DLX6 lineman gloves protect hands from cuts and feature a hi-viz 6-inch cuff for better visibility. Made from durable horse leather, they feature a double-leather palm patches in high-wear areas and a ParaActiv™ engineered yarn liner that offers 360° cut protection with moderate ANSI A4 cut resistance. These gloves are treated to repel water, liquids, and stains.

  • Emerald CX® S13CXLX

    Product ID: S13CXLX

    Strong dry grip with 360° cut protection

    Our durable Emerald CX® S13CXLX gloves feature latex palms that provide a secure grip on dry surfaces, making them an ideal choice for working with glass or in masonry and construction. The 13-gauge blend is made with DuPont™ Kevlar® fiber and stainless-steel Wire-Core™, affording 360° ANSI Level A5 Cut Protection and ANSI Level 4 Puncture Resistance in a comfortable shell.

  • Dexterity® S18KGDNE

    Product ID: S18KGDNE

    Thin dexterous gloves with arc flash protection for precision work

    Our Dexterity® S18KGDNE knit gloves are arc flash level 3 rated with a dexterous design for precision electrical maintenance work. Made with DuPont™ Kevlar® fiber that provides 360° cut protection, they feature additional cut-resistance on the cuff to protect arms and wrists against exposed metal edges. Touchscreen compatible with a neoprene palm coating for a sturdy grip and features anti-static properties to protect sensitive electronics.

  • Endura® 378GCXVB

    Product ID: 378GCXVB

    Maximum Cut Protection to Our Impact Line

    Our new 378GCXVB gloves bring maximum cut resistance to our impact protection offering. The lining is made with DuPont™ Kevlar® fiber which provides 360° ANSI Level A9 cut protection while the flexible back-of-hand plate offers ANSI Level 2 impact protection – all in a highly durable leather shell that resists oil and water. Originally designed for use in oil and gas applications, these versatile gloves are useful for high-hazard applications in mining, forestry, construction, and other industries where cut and impact risks can be high.

  • Endura® 378GOBKVB

    Product ID: 378GOBKVB

    Arc Flash-rated driver gloves that resist oil, water, punctures, and cuts

    These versatile driver gloves combine a high level of cut resistance, back-of-the-hand protection and an Arc Flash Level 3 rating, without compromising dexterity. The combination of DuPont™ Kevlar® fiber lining and tough goatskin leather delivers 360° ANSI Level A4 cut protection and ANSI Level 4 puncture resistance, while back-of-the-hand reinforcements provide ANSI Level 2 impact protection. An Oilbloc™ treatment offers unbeatable oil and water resistance.

  • Dragon™ K825KP

    Product ID: K825KP

    Cut-resistant gloves that can handle extreme heat

    Seamlessly knit from DuPont™ Kevlar® fiber, this glove from our Dragon™ series provides heat protection in temperatures up to 320°C / 608°F while preserving dexterity and comfort. Its 100% wool terry liner offers further protection from heat, making it ideal for use in injection molding or handling hot materials. It also offers ANSI Level A4 cut protection. Elasticized wrists guarantee a snug fit.

  • Endura® 378GKGDT

    Product ID: 378GKGDT

    General purpose protection against cuts plus cold protection down to -20°C / -4°F

    Our Endura® 378GKGDT gloves keep hands warm down to -20°C / -4°F and offer cut protection plus oil resistance. The ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A5 cut resistance. Keystone thumb design helps improve durability without impeding dexterity, making it suitable for material handling.

  • Action™ SKLP

    Product ID: SKLP

    360° cut protection meets flame resistance

    These string knit gloves, which feature a DuPont™ Kevlar® stainless steel composite yarn blended with polyester, provide 360° ANSI Level A5 cut protection and flame resistance. Their leather palms increase comfort and durability, while providing a strong, steady grip which makes these gloves an ideal choice when handling heavy metal parts and glass or sharp objects.

  • Dexterity® SKGPNVB

    Product ID: SKGPNVB

    Impact and oil-resistant gloves with 360° cut protection

    These high-dexterity gloves benefit from reinforced back-of-hand protection that defends against light impacts and feature a DuPont™ Kevlar® wrapped composite filament fiber that ensures 360° ANSI Level A4 cut protection. A micropore nitrile coating provides a strong, steady grip in oily conditions, making these gloves ideal for working with petroleum as well as oil and gas extraction.

  • Dexterity® SKFGFNVB

    Product ID: SKFGFNVB

    Impact and cut resistant gloves with a steady grip

    These impact-resistant gloves feature enhanced back-of-hand protection and a blended DuPont™ Kevlar® fiber that stands up to heat while providing 360° ANSI Level A4 cut protection. A foam nitrile palm coating offers a steady grip even in wet or oily conditions, and a string-knit shell provides superior dexterity and breathability as compared to typical leather gloves.

  • Contender™ KGC1T

    Product ID: KGC1T

    Flame-resistant sleeves that defend against cuts, punctures and abrasion

    A must-have for any job site where flames and sparks may pose a hazard, these protective sleeves include a tapered fit and elasticized STAYz-UP™ armbands to ensure comfort and prevent sliding. Their Kevlar™ and composite filament fiber blend yarn delivers ANSI Level A4 cut protection, ANSI Level 1 abrasion resistance, and ANSI Level 2 puncture resistance. Flame-resistant properties ensure these sleeves won’t burn, drip or melt and a dark green color hides stains.

  • Endura® 398OBPB

    Product ID: 398OBPB

    Puncture-resistant MIG welding gloves with cut and heat protection

    Designed specifically for MIG welding, these gloves feature Punkban™ for ASTM Level 5 hypodermic puncture protection on the thumb and index finger to guard against common welding wire injuries. In addition, the gloves achieved an ANSI Level 3 heat rating and feature a lining made with DuPont™ Kevlar® fiber for 360° cut resistance with ANSI Level A6 cut protection. Their 5″ gauntlet cuffs offer a wider area of coverage. Cushioned wrists ensure comfort during long working days. Black goatskin leather hides grease and oil stains.

    Sold in left-handed (398OBPBLH) and right-handed (398OBPBRH) versions: one of the gloves in the pair features Punkban™ on the thumb and index finger for ANSI Level A5 hypodermic puncture resistance in these areas.

  • Endura® 378KGVB

    Product ID: 378KGVB

    Medium-duty impact-resistant leather gloves with 360° cut protection

    These medium-duty impact-resistant gloves feature a lining made with DuPont™ Kevlar® fiber, adding 360° cut resistance with ANSI Level A4 cut protection inside their durable leather shell. In addition, their non-padded palms provide more dexterity and tactility for everyday work where vibration hazards are not a concern.

  • Endura® 378GKG4P

    Product ID: 378GKG4P

    Multi-feature driver gloves with extreme impact resistance and arc flash protection

    This multi-feature glove features our 4PRO™ back-of-hand protection to deliver maximum impact resistance that is more flexible and dexterous. In addition to being one of the first gloves on the market to offer ANSI Level 3 impact resistance (the industry’s highest impact rating level), these gloves provide 360° cut resistance with ANSI Level A5 cut protection thanks to their lining made with DuPont™ Kevlar® fiber. This feature-packed glove also includes vibration-dampening palms, is treated with Oilbloc™ for oil/water repellancy, and has been arc flash tested for Level 3 with an ATPV of 35 cal/cm².

  • Dexterity® S18KGFN

    Product ID: S18KGFN

    Strong grip, cut-resistant, touchscreen compatible gloves

    ANSI Level A3 cut protection, a grip-strengthening foam nitrile palm coating and a close, tactile feel allows these high-dexterity gloves to excel at handling small parts and completing precise tasks. They’re made with cut-resistant DuPont™ Kevlar® fiber and have been treated with an active agent to achieve a 99.9% antimicrobial status. They’re also touchscreen compatible for added convenience.

  • Dexterity® S13KGPN

    Product ID: S13KGPN

    A superior grip combined with 360° cut protection

    A micropore nitrile coating that creates tiny, suction cup-like craters on the palms gives these gloves an unsurpassed level of grip on wet and oily surfaces. Their DuPont™ Kevlar® fiber construction provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 2 puncture resistance. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.  These gloves are fully launderable, allowing them to be cleaned and refreshed with ease.

  • Dexterity® S13FRNE

    Product ID: S13FRNE

    Arc Flash tested gloves that guard against flames and cuts

    An engineered yarn that blends ParaActiv™ with flame-resistant fibers gives these gloves an Arc Flash testing level of 2, as well as ANSI Level 3 abrasion resistance, 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. Their knit shell construction ensures that the hands still enjoy a wide range of movement and neoprene-coated palms provide a strong, steady grip even in wet or oily conditions.  Treated with an active agent to achieve a 99.9% antimicrobial status.

  • Cool Grip® SKX-W4

    Product ID: SKX-W4

    360°cut protection matched with heat resistance and added forearm protection

    These gloves are made from a tough DuPont™ Kevlar® fiber and carbon blend that provides 360° ANSI Level A4 cut protection and ANSI Level 5 heat resistance. They feature 4″ gauntlet cuffs for enhanced forearm protection. Their 100% knit terry liner traps air in to provide further protection from thermal contact. A high level of dexterity makes these gloves adept at handling hot pieces of machinery.

  • Dexterity® SKFGFNLTC

    Product ID: SKFGFNLTC

    360° cut protection matched with a strong, steady grip

    These 13-gauge knit gloves match outstanding dexterity to a high level of cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 2 puncture resistance and ANSI Level 4 abrasion resistance. Foam nitrile coating at the palms gives these gloves a strong, steady grip on lightly oiled surfaces, and leather patches at the thumb crotch area extend their lifespan by reinforcing this high-wear area.

  • Dexterity® SKFG2DFT

    Product ID: SKFG2DFT

    360° cut-resistant, high grip gloves that provide all day comfort

    These ambidextrous gloves are made from a fine-gauge knit that provides a superior level of dexterity and flexibility. They feature a DuPont™ Kevlar® fiber that provides 360° ANSI Level A4 cut protection without adding bulk, and benefit from a micropore grip nitrile coating on the fingertips that greatly enhances the grip.

No products in your box.