This cut icon is followed by the 360 cut icon with special spacing
-
TenActiv™ S18TAFGFNF
Product ID: S18TAFGFNFUltra-thin cut resistance with palm coating that covers fingers and knuckles for better water protection
Our versatile TenActiv™ S18TAFGFNF gloves are ultra-thin with an extended foam nitrile coating that covers fingers up to the knuckles for additional protection in wet conditions. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance while the 3/4 foam nitrile coating offers steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel.
-
Endura® 365DLX6KG
Product ID: 365DLX6KGCut-resistant lineman gloves with extended hi-viz cuffs for visibility
Our Endura® 365DLX6 lineman gloves protect hands from cuts and feature a hi-viz 6-inch cuff for better visibility. Made from durable horse leather, they feature a double-leather palm patches in high-wear areas and a ParaActiv™ engineered yarn liner that offers 360° cut protection with moderate ANSI A4 cut resistance. These gloves are treated to repel water, liquids, and stains.
-
Endura® 361DLXTKG
Product ID: 361DLXTKGThese cowgrain leather mitts meet the ANSI/ ISEA 107-2015 standard for high visibility, thanks to cuffs that feature 3M™ retroreflective silver strips and high-viz bands.
They’ve been treated with Waterstop™ to repel water and oil, and their Thinsulate™ lining retains warmth down to temperatures of -15°C / 5°F .
Durability is assured through double-leather palm patches in high-wear areas. Lined with DuPont™ Kevlar® fiber, these mitts provide 360° cut protection -
Endura® 399GKGTL5
Product ID: 399GKGTL5Moderate cut protection with extended gauntlet cuffs and protection from cold down to -20°C / -4°F
Our Endura® 399GKGTL5 gloves feature a ParaActiv™ liner that provides 360° cut protection with ANSI A4 cut resistance. They keep hands warm in temperatures down to -20°C / -4°F, and their 6″ gauntlet cuffs provide additional protection to wrists and forearms. Designed to conform to hands for a closer fit and more dexterity.
-
Contender™ TOCKVLO
Product ID: TOCKVLOHeat protection gloves with grip in orange knit for better visibility
Our Contender™ TOCKVLO orange knit gloves help increase hand placement visibility while providing 360° cut protection with moderate ANSI A4 cut resistance and ANSI 4 heat protection. The loop out design and longer knit-wrist cuffs ensure comfort during material handling, and the cotton-blend fabric absorbs grease and oil for a secure grip.
-
Endura® 399GKGL5L
Product ID: 399GKGL5LMIG welding gloves designed for a woman’s hands
Abrasion resistant goatskin leather and durable keystone thumbs optimize these MIG welding gloves for the long haul, while 6″ gauntlet cuffs provide extra coverage when heat is a hazard. A cut-and-sewn construction gives these gloves a close, dexterous fit, and their lining made with blended aramid provides 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. Testing places these gloves at an arc flash level 3 rating, and ANSI level 3 heat rating.
-
Endura® 398KGLBGL
Product ID: 398KGLBGLMIG welding gloves designed for a lady's hands for better fit and protection
Our Endura® 398KGLBGL MIG welding gloves are designed to protect against heat and cuts and fitted for a lady’s hands. They feature 6″ gauntlet cuffs for added forearm protection while the cushioned wrists increase comfort when welding for extended periods. Padded cowgrain palms offer additional comfort when material handling and back-of-hand fleece lining provides ANSI 2 heat resistance.
-
Endura® 365DLX2TKG
Product ID: 365DLX2TKGCold-rated lineman gloves with cut protection and 2-inch hi-viz cuffs
Our Endura® 365DLX2TKG lineman gloves feature cut resistance and cold protection. ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A4 cut resistance and 2-inch cuffs with hi-viz retroreflective bands provide better visibility. They are also Thinsulate™-lined for cold protection in temperatures down to -15°C / 5°F.
-
Endura® 505ALB
Product ID: 505ALBAluminized gloves for long sessions of stick welding
Featuring a back-of-hand aluminized layer, our Endura®️ 505ALB gloves protect against radiant heat, ultraviolet light, molten metal, sparks, and splash. They allow hands to stay at comfortable temperatures during extended periods of stick welding or for work in foundries.
-
Endura® 399OBGKG5
Product ID: 399OBGKG5Extended gauntlet metal fabrication driver gloves with water and oil resistance
Our Endura® 399OBGKG5 drivers gloves use durable goatskin treated with Oilbloc™ to resist oil and water. An all-round metal fabrication shop glove, it features wing thumbs to provide extra durability while 6″ gauntlet cuffs ensure added arm protection. The lining is cut-and-sewn for a comfortable fit that won’t bunch and is made with DuPont™ Kevlar® fiber for 360° cut protection with ANSI Level A4 cut resistance.
-
Clutch Gear® MXPG
Product ID: MXPGSlim, flexible mechanic gloves with moderate cut protection
Thanks to a laminated spandex backing and leather palms, our slim profile Clutch Gear® MXPG mechanic gloves combine durability with improved hand movement and feeling. Leather wraps around the thumb and forefinger to reduce wear in traditional high stress wear areas while wide elastic straps with hook and loop closures allow for a fit that’s snug yet comfortable.
Note: Sizes 3XL & 4XL are made to order
-
Contender™ TCKVLO
Product ID: TCKVLOHigh heat and cut-resistant gloves with grip that doesn’t quit
Made from a terry knit fabric with a composite filament fiber, the Contender™ TCKVLO delivers 360° cut protection and heat resistance, making them ideal for metal stamping and fabrication. Long knit cuffs increase comfort while the cotton woven into the fabric helps absorb grease and oil for a firm, secure grip.
-
Endura® 378GOBKVB
Product ID: 378GOBKVBArc Flash-rated driver gloves that resist oil, water, punctures, and cuts
These versatile driver gloves combine a high level of cut resistance, back-of-the-hand protection and an Arc Flash Level 3 rating, without compromising dexterity. The combination of DuPont™ Kevlar® fiber lining and tough goatskin leather delivers 360° ANSI Level A4 cut protection and ANSI Level 4 puncture resistance, while back-of-the-hand reinforcements provide ANSI Level 2 impact protection. An Oilbloc™ treatment offers unbeatable oil and water resistance.
-
TenActiv™ STAGFNP
Product ID: STAGFNPLightweight, strong grip gloves that guard against cuts and punctures
A 13-gauge TenActiv™ shell provides these lightweight gloves with ANSI Level 4 abrasion resistance and 360° ANSI Level A4 cut protection without impeding dexterity or mobility. Leather palm patches placed at the palm and thumb crotch reinforce critical wear areas boost puncture resistance to ANSI Level 5. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions while providing ANSI Level 3 palm puncture resistance.
-
Contender™ KGC1T
Product ID: KGC1TFlame-resistant sleeves that defend against cuts, punctures and abrasion
A must-have for any job site where flames and sparks may pose a hazard, these protective sleeves include a tapered fit and elasticized STAYz-UP™ armbands to ensure comfort and prevent sliding. Their Kevlar™ and composite filament fiber blend yarn delivers ANSI Level A4 cut protection, ANSI Level 1 abrasion resistance, and ANSI Level 2 puncture resistance. Flame-resistant properties ensure these sleeves won’t burn, drip or melt and a dark green color hides stains.
-
Contender™ KG/CE22TH
Product ID: KG/CE22THDouble-layered incidental cut and heat arm protection for material handling
Our Contender™ KG/CE22TH sleeves protect arms from incidental cut and heat when material handling. A double layer construction safeguards against sharp edges and the cotton-blend adds comfort for all day wear. The silicone-free construction makes these sleeves ideal for handling surfaces prior to painting and the ParaActiv™ engineered yarn liner provides incidental ANSI A4 cut resistance and ANSI 2 heat protection.
-
Contender™ KFG
Product ID: KFGCut resistant sleeves with a snug, reliable fit
Aramid-encased, composite filament fiber yarn provides ANSI Level A4 cut protection. These sleeves are approved for 4.5 seconds of incidental heat contact up to 315°C / 600°F. Elasticized armbands made with STAYz-UP™ technology eliminate any sliding or slipping of the sleeves, guaranteeing a snug, reliable fit.
-
Contender™ KBKB1T
Product ID: KBKB1TFlame-retardant, cut-resistant sleeves optimized for welding work
Made from a blend of stain-hiding black DuPont™ Kevlar® fiber and modacrylic, these sleeves offer ANSI Level A4 cut protection while resisting flames, making them an excellent choice for welding work. They’re fully washable for easy refresh and include elasticized armbands to ensure sleeves stay put during long work hours.
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNWaterproof cut-resistant gloves that keep hands warm down to -10°C / 14°F
This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ knit assures ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ S18WTFN
Product ID: S18WTFNWaterproof 360° cut-resistant gloves for handling lightly oiled parts
These waterproof gloves provide unbeatable protection from harsh elements due to an exclusive breathable waterproof and windproof membrane. They’re also useful for handling parts soaked in oil or cutting fluids. Their unique membrane lamination prevents layers from slipping in addition to a nitrile palm coating that provides a strong, steady grip. Their TenActiv™ knit provides 360° ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ STAGBPU
Product ID: STAGBPUBlack knit cut-resistant gloves that hide dirt and stains for longer wear life
Our TenActiv™ STAGBPU gloves are made from dark colored TenActiv™ engineered yarn to hide dirt and stains while protecting worker hands from cut hazards. The low-linting dark coloring allows these gloves to be used longer between laundering cycles, increasing their wear-life. They are ideal for work in unfinished or grimy environments where dirt is visible. Featuring moderate 360° cut protection with ANSI A4 cut resistance and polyurethane dipped palms for dry grip, they balance protection and comfort with a bare hand feel and dexterity.
-
Cool Grip® SPGC/A
Product ID: SPGC/AInsulated, heat resistant gloves with 360° cut protection
Designed for use in rubber and plastics manufacturing, these gloves are made from a blend of composite filament fiber, polyester, and Cordura nylon that provides ANSI Level 5 heat resistance and 360° ANSI Level A4 cut protection. They also featuring outstanding dexterity, and benefit from a glove-within-a-glove design that increases insulation.
-
TenActiv™ S18TAGOFN
Product ID: S18TAGOFNHighly visible cut-resistant gloves that block static
A hi-viz shell optimizes these flexible 18-gauge gloves for jobs where both cuts and visibility may be of concern. They’re made from tough TenActiv™ yarn for ANSI Level A4 cut protection, and benefit from a nitrile palm coating that ensures a strong grip even in wet or oily conditions. Their silicone and lint-free qualities, combined with electrostatic dissipative properties stop static from forming, make them an excellent choice when working with sensitive electronics.
-
TenActiv™ S18TAGGFN
Product ID: S18TAGGFNStatic blocking hi-viz gloves that offer cut protection and a strong grip
A hi-viz shell optimizes these flexible 18-gauge gloves for jobs where both cuts and visibility may be of concern. They’re made from tough TenActiv™ yarn for ANSI Level A4 cut protection, and benefit from a nitrile palm coating that ensures a strong grip even in wet or oily conditions. Their silicone and lint-free qualities, combined with electrostatic dissipative properties stop static from forming, make them an excellent choice for working with sensitive electronics.
