-
Chemstop™ S15KGVNFL
Product ID: S15KGVNFLHi-viz orange chemical protection with cut resistance that keep hands warm down to -5°C / 23°F
Our Chemstop™ S15KGVNFL orange hi-viz PVC gloves are chemical resistant and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A6 cut resistance. Their fleece lining ensures that hands stay warm in temperatures down to -5°C / 23°F while a nitrile hand coating offers steady wet grip.
-
TenActiv™ S21TXUFN
Product ID: S21TXUFNMaximum cut protection with outstanding hand dexterity and comfort for freedom of movement and bare hand feel
Our TenActiv™ S21TXUFN are ultra-thin for exceptional hand freedom with the highest level of cut resistance. Ideal for precision applications where dexterity is required and high cut hazards are present, their TenActiv™ engineered yarn provides 360° cut protection with extreme ANSI A9 cut resistance. The ultra-thin nitrile palm coating offers steady wet grip and a bare hand feel. They are CFIA and FDA compliant for safe food handling and touchscreen compatible to seamlessly move between tasks.
-
Dexterity® S18KGDNE
Product ID: S18KGDNEArc flash protection with touchscreen compatibility plus additional wrist cut protection to guard against sharp edges
Our arc flash-rated Dexterity® S18KGDNE gloves offer protection against cut hazards and unfinished edges and are touchscreen friendly to seamlessly move between tasks. Arc flash-rated level 3 with an ATPV of 25 cal / cm², they’re made from electrostatic dissipative ParaActiv™ engineered yarn to protect microelectronics and provide 360° cut protection with ANSI A3 cut resistance. Additionally, the cuffs offer ANSI A6 cut protection for protection against sharp edges found in electrical boxes. These gloves also feature a neoprene palm coating material that is known to resist flame for steady grip.
-
Sure Knit™ CSTN120HF
Product ID: CSTN120HFCleanroom-processed fingerless inspector gloves
Thanks to an open-finger design, our cleanroom processed Sure Knit® CSTN120HF gloves provide the freedom to use bare fingertips for fine assembly, while still providing protection from contaminants. The finger opening hems are specially sealed to protect against lint and loose fibers. Alternatively, they can be worn as a glove liner under vinyl, latex, or nitrile disposable glove.
-
Dexterity® S15GPNVB
Product ID: S15GPNVBThin gloves with cut and impact protection plus micropore nitrile palm coating for steady wet grip
Our Dexterity® S15GPNVB gloves offer cut resistance and impact protection plus a micropore nitrile palm coating for better wet grip. They provide 360° of cut protection with ANSI level 5 cut resistance plus back-of-hand ANSI 2 impact protection against knocks and bumps. Micropore nitrile palm coating offers a steady wet grip and helps prevent water from seeping in.
-
TenActiv™ STAGBLPVB
Product ID: STAGBLPVBErgonomically shaped leather palms for more grip and dexterity than typical leather plus extreme cut resistance
Our TenActiv™ STAGBLPVB gloves feature ErgoHyde leather palms that provide improved hand movement and more grip than typical leather. TenActiv™ engineered yarn provides 360° cut protection with extreme ANSI A8 cut resistance, plus hi-viz back-of-hand bumpers offer improved hand placement visibility and ANSI 2 impact protection. Treated to resist water and liquids, their ErgoHyde palms offer an outstanding range of motion plus strong grip in wet conditions.
-
Contender™ KBKB1T
Product ID: KBKB1THeat-resistant sleeves with cut protection made with material that resists sparks and melting
Our cut-resistant Contender™ KBKB1T FR sleeves offer heat protection and are made with material designed to resist flame. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance, ANSI 2 heat resistance, and passes the ASTM D6413 vertical flame resistance test for protection against sparks and slag. Tapered sleeves with elasticized biceps and thumbholes secure sleeves and ensure a snug fit.
-
SnowForce™ 635CRYO
Product ID: 635CRYOWaterproof protection for handling extremely cold cryogens
Designed for use around cryogens, these waterproof gloves are insulated with 3M Thinsulate™ which allows them to withstand contact with dry ice for 267 seconds. RaoTex™ inserts prevent cryogens from soaking through to the skin and act as an added insulator, trapping body heat while allowing moisture to escape. An extended cuff increases the area of protection while a looser fit allows for easy removal in the event of contact with cryogens.
-
Chemstop™ S15KGV30N
Product ID: S15KGV30NChemical gloves with cut protection and nitrile coating for better wet grip
Our Chemstop™ S15KGV30N gloves offer reliable protection from cut hazards and chemical exposure. Red PVC coating guards against chemicals and solvents while a black nitrile full hand coating resists oil, ensuring a steady wet grip. ParaActiv™ engineered yarn liner that provides 360° cut protection with high ANSI A5 cut resistance and ANSI 2 heat protection.
-
Sure Knit™ S13TP3K
Product ID: S13TP3KLow-linting inspector gloves for protection against incidental cut hazards
Our Sure Knit™ S13TP3K are low-linting inspector gloves that protect against minor cut hazards. Offering 360° cut protection with ANSI A2 cut resistance, these gloves are made with low-linting polyester knit that prevents contamination and makes them an ideal choice for assembly and paint line applications. They feature a snug fit to ensure lasting comfort and dexterity.
-
Emerald CX® S10NXFN
Product ID: S10NXFNBlack knit cut protection for longer wear life with touchscreen compatibility to seamlessly move between tasks
Our touchscreen compatible Emerald CX® S10NXFN gloves offer protection against cut hazards with black knit to hide stains and increase wear life. Engineered material provides high ANSI A6 cut resistance plus maximum ANSI A5 probe puncture protection. Foam nitrile palm coating offers a steady grip in wet or oily conditions and are touchscreen compatible to seamlessly move between tasks.
-
Superior® MLNF
Product ID: MLNFLightweight and lint-free painter's gloves
These painter’s gloves are made from a lint-free nylon that optimizes them for any application where dust or particles may pose a concern, or when surfaces must be protected from scratches, oils, and fingerprints. They’re lightweight, comfortable, and feature a slip-on fit for easy on and off. Fully launderable, they can be easily refreshed after messy jobs.
-
Ground Hog™ 14012GH
Product ID: 14012GHStatic grounding gloves that eliminate electrostatic paint spray-back while keeping hands protected
Our Ground Hog™ 14012GH cleanroom-processed gloves feature highly conductive continuous silver strips on palms that run from the inside of the glove to the outside to help ground workers and avoid paint spray-back. The lint-free laminated polyurethane fabric resists solvents and are cleanroom-processed to avoid shedding materials and prevent paint contamination. Made with latex-free materials to reduce the risk of allergies.
-
Endura® 375KGVB
Product ID: 375KGVBModerate cut resistance and impact protection with unpadded palms for better grip and feel
Our Endura® 375KGVB protect against cut hazards and are unpadded for better grip and sense of feel. ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance and incidental heat protection. Back-of-hand ANSI 2 impact resistance protects against knocks and bumps. The goatskin leather helps improve dexterity and durability for a longer wear life and has been treated to resist water and liquids.
-
Superior® N10F
Product ID: N10FBreathable lightweight and reversible low-lint nylon inspection gloves
Our Superior® N10F reversible inspection gloves feature a lightweight nylon with a breathable back for better comfort, dexterity, and touch sensitivity. Low-linting to avoid shedding material and contamination, they are reversible for ease of use and CFIA-compliant for safe food handling. Ideal for assembly tasks and inspection lines, they can be worn as a liner under other safety gloves for comfort.
-
TenActiv™ STAGYPNVB
Product ID: STAGYPNVBHi-viz cut protection with impact resistance and wet grip
Our hi-viz TenActiv™ STAGYPNVB impact-resistant gloves offer cut protection and worker visibility. The TenActiv™ engineered yarn provides 360° cut protection with ANSI A5 cut resistance, while back-of-hand ANSI 1 impact protection guards against knocks and bumps. Micropore nitrile palm coating offers a steady wet grip and improves durability for a longer wear life. Hi-viz knit shell offers better hand placement awareness and worker visibility.
-
Chemstop™ S15KGVNVB
Product ID: S15KGVNVBHi-viz chemical gloves with cut protection and impact resistance
Our Chemstop™ S15KGVNVB PVC chemical gloves feature hi-viz impact-resistant bumpers for back-of-hand protection and a ParaActiv™ engineered yarn liner with high ANSI A5 cut resistance. The nitrile hand coating offers steady wet grip, while the gauntlet cuffs provide extra wrist safety.
-
Chemstop™ S15KGVNFVB
Product ID: S15KGVNFVBCold-rated chemical gloves with impact and cut resistance
Our impact-resistant Chemstop™ S15KGVNFVB hi-viz gloves feature a fleece liner for cold protection down to -5°C / 23°F along with cut protection. PVC construction provides chemical resistance with fully dipped nitrile hand coating for a steady wet grip. The ParaActiv™ engineered yarn liner provides 360° cut resistance with high ANSI A6 cut protection. Hi-viz back-of-hand impact resistance offers visibility for hand placement and protection against knocks and bumps.
-
Endura® 378GOBTL
Product ID: 378GOBTLCold-rated general use leather gloves that resist liquids in temperatures down to -15°C / 5°F
Our cold-rated Endura® 378GOBTL general use leather gloves resist liquid penetration and are Thinsulate™ lined for cold protection down to -15°C / 5°F. Goatskin leather provides natural abrasion resistance and is treated to resist water and liquids. A keystone thumb design offers improved durability for a longer wear life.
-
Endura® 378GOBKL
Product ID: 378GOBKLArc flash-rated for non-energized work plus cut protection and liquid resistance
Our Endura® 378GOBKL goatskin gloves are ideal for non-energized work where arc flash is present and liquid resistance is a must. Made with material designed to resist flame, they are arc flash-rated level 4 with an ATPV of 40 cal / cm², offer ANSI 3 heat resistance, and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A4 cut resistance. These gloves are treated resist water and liquids, while the palms are unpadded for steady grip and a better sense of feel when performing tasks.
-
Chemstop™ LF3020
Product ID: LF3020Economical latex water protection for equipment maintenance in food processing
Our Chemstop™ LF3020 food safe gloves feature extended forearm protection for equipment maintenance in food processing. These 18-mil thick gloves feature a latex shell to protect against a wide range of chemicals and synthetic solvents, plus feature embossed palms for steady grip. Their 12-inch length provides extra forearm coverage. They are CFIA-compliant for safe food handling.
-
Endura® 378GOBDTK
Product ID: 378GOBDTKLiquid-resistant leather with knit cuffs to lock in warmth for extreme cold protection down to -30°C / -22°F
Our Endura® 378GOBDTK gloves are an ideal choice for dexterity and extreme cold protection. Thinsulate™ lining keeps hands warm in cold temperatures down to -30°C / -22°F while goatskin leather is treated to resist water and liquids. They feature knit cuffs for easy use with jackets and to help seal in heat while keeping harsh environmental elements out. Their keystone thumb design helps improve dexterity and durability for a longer wear life.
-
Chemstop™ NIF3018
Product ID: NIF3018Chemical-resistant gloves with flock lining for comfort plus extended forearm protection
Our Chemstop™ NIF3018 chemical gloves offer a cool, comfortable feel and extended forearm protection. These 15 mil thick nitrile gloves protect against a wide range of chemicals and solvents, including oil, fuel, and methanol. Their 12-inch length provides extra forearm coverage and are cotton flock-lined to absorb sweat. An embossed finish offers steady grip that’s FDA and CFIA-compliant for safe food handling.
Superior Glove™, a leading Manufacturer & Wholesale Supplier of Work & Safety Gloves & Arm Sleeves. FREE SAMPLES. Wide Variety of Styles & Materials.
