Hi-Viz cut protection matched with chemical resistance and a strong grip
Featuring impact-resistant back-of-hand protection, chemical-resistant PVC and full aramid fiber lining that ensures ANSI Level A5 cut protection, these gloves guard against a wide variety of risks. Their nitrile coating provides a secure grip on even wet and slippery surfaces, gauntlet cuffs increase wrist safety and green hi-viz backs offer enhanced visibility.
These tough goatskin gloves provide reinforced back-of-hand protection and a composite blended lining that offers 360° ANSI Level A6 cut protection. They defend the hand from impact injuries, while a padded palm increases durability and suppresses vibrations.
A cut-and-sewn construction and elasticized backs allow these driver gloves to offer a close and comfortable fit. The natural abrasion-resistance of goatskin combined with a keystone thumb design ensures long-lasting durability, while a 100g Thinsulate™ lining keeps hands warm in temperatures down to -15°C / 5°F.
These highly dexterous MIG welding gloves don’t skimp on comfort or protection. They feature tough cowgrain palms and suede leather backs and cuffs. They’re complete with cushioned wrists and 6″ gauntlet cuffs for greater coverage. Their back-of-hand fleece lining ensures ANSI Level 4 heat resistance, and a DuPont™ Kevlar® fiber lining provides 360° ANSI Level A4 cut resistance and ANSI Level 3 puncture resistance.
These tough goatskin gloves provide reinforced back-of-hand protection and a DuPont™ Kevlar® fiber / composite filament fiber lining that offers 360° ANSI Level A5 cut protection while defending against impact injuries. They’ve received an Oilbloc™ treatment which prevents oils and liquids from soaking into the leather, and a padded palm increases durability while suppressing vibrations. A level 3 Arch Flash testing rating ensures protection from sparks and flame.
These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers and are reinforced at the fingertips to offer a higher level of protection to the areas that need it most. Safety is further enhanced by knuckle straps and 2.5″ rubberized safety cuffs improve wrist protection while allowing for an easy fit. All-over lining provides warmth and comfort in cold conditions.
These winter driver gloves are made from tough cowgrain leather that resists abrasions, repels water and will form to the hands over time for a closer, comfortable fit. The keystone thumb design maximizes durability and dexterity, while elasticized backs make the fit snug yet flexible. A full fleece lining provides fingers with much-needed warmth in winter conditions.
These tough goatskin gloves benefit from a cut-and-sewn construction that gives them a dexterous, comfortable fit. Abrasion resistant goatskin and the durability of a keystone thumb design extends product longevity, while a DuPont™ Kevlar® fiber / composite filament fiber lining provides 360° ANSI Level A3 cut protection and ANSI Level 4 puncture resistance.
These driver gloves are made from tough cowgrain leather that resists abrasions and repels water and will form to the hands over time for a closer, comfortable fit. Keystone thumb design maximizes durability and dexterity, while elasticized backs make the fit snug yet flexible.
These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. A bandtop cuff allows hands to slide in and out with ease, and light resistance to water and oil further increases their versatility.
The solution to cold fingers lies inside these durable mitts built from tough cowgrain that offer protection in temperatures down to -35°C / -31°F. They’re lined with layers of pillow-soft insulation that trap heat inside and have elasticized wrists that prevent cold air from entering. As a bonus, a pair of helpful metal clips allow the mitts to be bound together when not in use.
Tear-resistant goat-grain palms, reinforced thumb-crotches and DuPont™ Kevlar® fiber make these tough gloves ideal for handling metals. They provide 360° ANSI Level A5 cut protection and ANSI Level 4 puncture resistance and feature snug wrists for a secure fit. They’re also highly flexible and dexterous.
These tough, 10-gauge nylon gloves are padded with a vibration-dampening layer of polymer, making them a must for anyone working with or around a jackhammer. They’re machine washable for easy refresh and rot-resistant for a longer lifespan. Elasticized wrists provide a snug, comfortable fit.
