-
Endura® 398GDP
Product ID: 398GDPThe next generation safety glove delivers unbeatable comfort and durability
We’ve made our classic safety gloves even better. Re-engineered using modern glove design and technology, these gloves feature a double-layered goatskin palm for increased durability while remaining supple for better dexterity than typical double-palmed safety gloves. The sewing thread is made with Kevlar® fiber for added seam integrity. And the cuff expands, allowing for a comfortable fit over a jacket or sleeve.
-
Endura® 378GOBKVB
Product ID: 378GOBKVBArc flash-rated multi-hazard protection with unpadded palms for a wider range of movement plus liquid resistance
Our Endura® 378GOBKVB gloves offer protection against arc flash, cuts, and impact hazards without impeding dexterity. Arc flash-rated level 3 with an ATPV of 34 cal / cm², their ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance. Back-of-hand ANSI 2 impact resistance offers protection against knocks and bumps when working in tight spaces. Treated to resist water and liquids plus unpadded palms for steady grip and a better sense of feel when performing tasks.
-
TenActiv™ STAGFNP
Product ID: STAGFNPLightweight, strong grip gloves that guard against cuts and punctures
A 13-gauge TenActiv™ shell provides these lightweight gloves with ANSI Level 4 abrasion resistance and 360° ANSI Level A4 cut protection without impeding dexterity or mobility. Leather palm patches placed at the palm and thumb crotch reinforce critical wear areas boost puncture resistance to ANSI Level 5. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions while providing ANSI Level 3 palm puncture resistance.
-
Chemstop™ NE246FFL
Product ID: NE246FFLHeat-resistant 18-inch extended-length chemical gloves for protection against caustics in maintenance tasks
Our Chemstop NE246FFL gloves are 18 inches long and offer protection against chemical and heat hazards. Theyre made from neoprene for protection against a wide range of chemicals, including acids, caustics, and oil. A fleece liner provides ANSI 3 heat resistance for protection from thermal contact, plus they offer 360° cut protection with ANSI A3 cut resistance. Extended-length gloves provide extra arm coverage plus diamond-grip textured palms offer steady grip.
-
Chemstop™ NE240TKL
Product ID: NE240TKLHeat-resistant 16-inch chemical gloves for protection against caustics in maintenance tasks
Our Chemstop NE240TKL gloves are 16 inches long and offer protection against chemical and heat hazards. Theyre made from neoprene for protection against a wide range of chemicals, including acids, caustics, and oil. A cotton liner provides ANSI 3 heat resistance for protection from thermal contact, plus they offer 360° cut protection with ANSI A3 cut resistance. Long-length gloves provide extra forearm coverage and diamond-grip textured palms offer steady grip.
-
Contender™ TRFGK
Product ID: TRFGKHeat and cut protection for fabrication and handling hot unfinished metal
Our Contender™ TRFGK gloves protect hands when handling hot unfinished metal and performing fabrication tasks. The ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A5 cut resistance and ANSI 5 heat protection. The loop out design and longer knit-wrist cuffs ensure comfort during material handling, and the cotton-blend fabric absorbs grease and oil for steady grip.
-
Dexterity® SKFGFNLTC
Product ID: SKFGFNLTC360° cut protection matched with a strong, steady grip
These 13-gauge knit gloves match outstanding dexterity to a high level of cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 2 puncture resistance and ANSI Level 4 abrasion resistance. Foam nitrile coating at the palms gives these gloves a strong, steady grip on lightly oiled surfaces, and leather patches at the thumb crotch area extend their lifespan by reinforcing this high-wear area.
-
Dexterity® SKFG2DFT
Product ID: SKFG2DFT360° cut-resistant, high grip gloves that provide all day comfort
These ambidextrous gloves are made from a fine-gauge knit that provides a superior level of dexterity and flexibility. They feature a DuPont™ Kevlar® fiber that provides 360° ANSI Level A4 cut protection without adding bulk, and benefit from a micropore grip nitrile coating on the fingertips that greatly enhances the grip.
-
Endura® 378GKGE
Product ID: 378GKGEEconomic choice for flash fire protection with cut resistance
Our Endura® 378GKGE goatskin gloves are an economic choice that protects against arc flash, cuts, and flame. Made with material designed to resist flame, they are arc flash-rated level 3 with an ATPV of 36 cal / cm² and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with moderate ANSI A4 cut resistance.
-
Contender™ SPGRK
Product ID: SPGRKLatex-free knit heat protection with 360? cut resistance
Our Contender™ SPGRK latex-free gloves protect against cut and heat hazards. ParaActiv™ engineered yarn material provides 360° cut protection with moderate ANSI A6 cut resistance and ANSI 4 heat protection. Made with 7-gauge fiber filament and seamless string knit for dexterity and comfort.
-
Dragon™ K825KP
Product ID: K825KPMaximum heat resistance with cut protection for plastic injection molding
Our Dragon K825KP gloves offer maximum heat resistance plus cut protection for plastic injection molding. ParaActiv engineered yarn provides 360° cut protection with ANSI A4 cut resistance and ANSI 5 heat protection. Elasticized cuffs provide a snug fit and a cotton liner offers comfortable insulation, making them ideal for handling hot parts.
-
Chemstop™ NE250TRC
Product ID: NE250TRCHeat-resistant 20-inch chemical gloves rubber cuff extension for protection against caustics in maintenance tasks
Our Chemstop NE250TRC gloves are 20 inches long and offer protection against chemical and heat hazards. Theyre made from neoprene for protection against a wide range of chemicals, including acids, caustics, and oil. An acrylic liner provides ANSI 3 heat resistance for protection from thermal contact, plus they offer 360° cut protection with ANSI A3 cut resistance. Extended-length gloves with additional rubber cuff extension provide extra arm coverage and a diamond-grip textured palms offer steady grip.
-
Endura® 378GHVTL
Product ID: 378GHVTLHi-Viz built-tough gloves that provide winter protection down to -30°C / -22°F
These built-tough goatskin gloves provide ultimate visibility even in trying conditions thanks to yellow hi-viz and Scotchlite™ retro-reflective stripes on the back of the hand. Thinsulate™ lining ensures that hands stay warm in temperatures down to -30°C / -22°F . Elasticized backs make sure that the fit secure.
-
Endura® 378GAX
Product ID: 378GAXGeneral use gloves with flexible fabric back and leather palms to balance breathability and durability
Our Endura® 378GAX breathable general use gloves balance abrasion resistance on the palms with flexible fabric back for comfort and improved hand mobility. Goatskin leather palms offer exceptional durability for a longer wear life while flexible back-of-hand synthetic material provides better dexterity and breathability.
-
Contender™ SPGRK2D
Product ID: SPGRK2DHeat and cut protection with double-sided PVC dots for breathable comfort and ambidextrous grip when handling hot parts
Our Contender SPGRK2D gloves protect against heat and cut hazards and feature double-sided PVC dots for breathable grip. ParaActiv engineered yarn provides 360° cut protection with ANSI A6 cut resistance and ANSI 3 heat protection, making them ideal for handling hot parts. PVC dots along the palm and back of the hand offer steady grip that is more breathable and flexible than full coverage gloves. Latex-free to reduce the risk of allergic reactions, their ambidextrous design makes them reversable to increase wear life.
-
Dexterity® SKGPNVB
Product ID: SKGPNVBImpact and oil-resistant gloves with 360° cut protection
These high-dexterity gloves benefit from reinforced back-of-hand protection that defends against light impacts and feature a DuPont™ Kevlar® wrapped composite filament fiber that ensures 360° ANSI Level A4 cut protection. A micropore nitrile coating provides a strong, steady grip in oily conditions, making these gloves ideal for working with petroleum as well as oil and gas extraction.
-
Dexterity® SKFGFNVB
Product ID: SKFGFNVBCut protection with incidental impact resistance plus foam nitrile palms for steady wet grip
Our Dexterity® SKFGFNVB gloves protect against cut hazards and incidental knocks and bumps. ParaActiv™ engineered yarn provides 360° cut protection with moderate ANSI A4 cut resistance plus back-of-hand bumpers with ANSI 1 impact protection. A foam nitrile palm coating offers a steady grip in wet or oily conditions.
Superior Glove™, a leading Manufacturer & Wholesale Supplier of Work & Safety Gloves & Arm Sleeves. FREE SAMPLES. Wide Variety of Styles & Materials.