-
Dexterity® S13PFNP
Product ID: S13PFNPHighly dexterous, puncture-resistant gloves with a strong grip
Made from a 13-gauge polyester shell, these gloves provide ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. Leather patches placed at the palm and thumb crotch areas boost puncture resistance to ANSI Level 5. These dexterous gloves remain highly flexible while protecting from punctures and scrapes. A nitrile palm coating provides a strong, steady grip.
-
TenActiv™ STAGFNP
Product ID: STAGFNPLightweight, strong grip gloves that guard against cuts and punctures
A 13-gauge TenActiv™ shell provides these lightweight gloves with ANSI Level 4 abrasion resistance and 360° ANSI Level A4 cut protection without impeding dexterity or mobility. Leather palm patches placed at the palm and thumb crotch reinforce critical wear areas boost puncture resistance to ANSI Level 5. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions while providing ANSI Level 3 palm puncture resistance.
-
TenActiv™ KTAG
Product ID: KTAGStay Cool and Cut-resistant sleeves
These tubular knit sleeves stay cool to provide long-lasting comfort in warm work conditions. Their tubular knit construction guards against abrasion hazards as well as dirt while providing ANSI Level A5 cut protection. Not intended for job sites that may pose a risk of sparks or flames.
-
Contender™ KFGCM
Product ID: KFGCMCut protecting sleeves that keep arms cool in warm working conditions
These sleeves combine ANSI Level A6 cut protection with unbeatable comfort for working in hot conditions. The aramid blended fiber is lined with moisture-wicking Coolmax® to keep arms dry and cool throughout the day. Elasticized armbands made with STAYz-UP™ technology eliminate any sliding or slipping, guaranteeing a snug, reliable fit. A choice of two sleeve styles: a regular tubular knit or a tapered knit, provides greater versatility.
-
TenActiv™ KTAG1T
Product ID: KTAG1TCooling, cut-resistant sleeves
These cool-to-the-touch sleeves provide relief from the heat while ensuring ANSI Level A2 cut protection. Thanks to their STAYz-UP™ elasticized armbands, sleeves will stay in place to provide all-day arm protection from cuts, dirt, and abrasion.
-
Contender™ KPXT
Product ID: KPXTFire- and cut-resistant sleeves that stay in place
Optimized for jobs with a high risk of exposure to sparks or flames, these 22 inch sleeves are constructed from fire-resistant Protex® fiber that will not burn, melt, or drip. Their double-layer tapered knit provides ANSI Level A2 cut protection, while the combination of STAYz-UP™ elasticized armbands and convenient thumbholes prevents slippage.
-
TenActiv™ KPSTA18TH
Product ID: KPSTA18THExtreme cut protection sleeves with twice the amount of stretch
These tubular sleeves combine extreme cut resistance with an unbeatable level of comfort. Their tough construction provides ANSI Level A9 cut protection and ANSI Level 5 puncture resistance. Thumbholes combined with elasticized STAYz-UP™ armbands ensure a secure fit while SMART-TENSION technology provides twice the amount of stretch and recovery as compared to previous generations. These sleeves are FDA- and CFIA-compliant.
-
Cutban™ KP1T
Product ID: KP1TStay-in-place sleeves that combine comfort with cut protection
Made from recycled material, these sleeves are constructed from a single-layer filament yarn that provides ANSI Level A2 cut protection. Their tapered construction and STAYz-UP™ elasticized biceps provide added comfort and ensure they stay in place during long work hours. These sleeves are available in silicone-free and Lycra-free versions, as well as with or without thumbholes.
-
Contender™ KBKB1T
Product ID: KBKB1TFlame-retardant, cut-resistant sleeves optimized for welding work
Made from a blend of stain-hiding black DuPont™ Kevlar® fiber and modacrylic, these sleeves offer ANSI Level A4 cut protection while resisting flames, making them an excellent choice for welding work. They’re fully washable for easy refresh and include elasticized armbands to ensure sleeves stay put during long work hours.
-
TenActiv™ S18TAXFN
Product ID: S18TAXFNHi-Viz cut protection with a strong grip and barehand feel
These touchscreen-compatible gloves made with TenActiv™ provide ANSI Level A6 cut protection, ANSI Level 4 abrasion resistance, and ANSI Level 3 puncture resistance. Their 18-gauge knit conforms to the hand for a high level of flexibility and a tactile feel, while their hi-viz color increases visibility. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions.
-
SUPERA™ FR WCKVFR
Product ID: WCKVFRFire-resistant watch cap that is ultra soft and non-irritating for all-day comfort
This fire-resistant (FR) cap is designed for maximum comfort and all-day wear with a two-layer Kermel®-viscose blend that is non-irritating and feels soft against the skin. Even better, the beanie is made of a fabric with inherent FR properties that won’t diminish with laundering, allowing for easy refresh between uses. It’s an excellent choice for construction, mining, utility work, and jobs that involve oil and gas. It’s both NFPA 70E compliant and CAT2; Ebt 16 cal/cm².
-
SUPERA™ FR NWKVFR
Product ID: NWKVFRFire-resistant neck gaiter that is ultra soft and non-irritating for all-day comfort
This fire-resistant (FR) neck gaiter is designed for maximum comfort and all-day wear with a two-layer Kermel®-viscose blend that is non-irritating and feels soft against the skin. Even better, the fabric’s inherent FR properties won’t diminish with laundering, allowing for easy refresh between uses. It’s an excellent choice for construction, mining, utility work, and jobs that involve oil and gas. It’s both NFPA 70E compliant and CAT2; Ebt 16 cal/cm².
-
SUPERA™ FR BAKVFR
Product ID: BAKVFRNon-irritating fire-resistant balaclava for reliable protection against fire hazards
Our SUPERA™ BAKVFR is a balaclava made with double layer Kermel®- viscose blend, protecting against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and ANSI CAT2; Ebt 16 cal/cm² rating, this balaclava is suitable for workers in industries where fire hazards exist such as construction, mining, and oil and gas.
-
TenActiv™ S18TAGOFN
Product ID: S18TAGOFNHighly visible cut-resistant gloves that block static
A hi-viz shell optimizes these flexible 18-gauge gloves for jobs where both cuts and visibility may be of concern. They’re made from tough TenActiv™ yarn for ANSI Level A4 cut protection, and benefit from a nitrile palm coating that ensures a strong grip even in wet or oily conditions. Their silicone and lint-free qualities, combined with electrostatic dissipative properties stop static from forming, make them an excellent choice when working with sensitive electronics.
-
TenActiv™ S18TAGGFN
Product ID: S18TAGGFNStatic blocking hi-viz gloves that offer cut protection and a strong grip
A hi-viz shell optimizes these flexible 18-gauge gloves for jobs where both cuts and visibility may be of concern. They’re made from tough TenActiv™ yarn for ANSI Level A4 cut protection, and benefit from a nitrile palm coating that ensures a strong grip even in wet or oily conditions. Their silicone and lint-free qualities, combined with electrostatic dissipative properties stop static from forming, make them an excellent choice for working with sensitive electronics.
-
TenActiv™ S18TAFGNT
Product ID: S18TAFGNTCut resistant gloves with a barehand feel that repel oil, water and solvents
These 18-gauge gloves feature a stronger-than-steel continuous filament yarn that ensures ANSI Level A4 cut protection and a ZedCoat™ palm coating that delivers ANSI Level 4 abrasion resistance while also defending against oils, solvents and water. They offer a highly tactile, bare-hand feel, making them an excellent match for precise tasks that carry cut risks, such as glass handling.
-
TenActiv™ S18TAFGFN
Product ID: S18TAFGFNUltra-thin and versatile cut-resistant gloves for a wide range of tasks
Our versatile TenActiv™ S18TAFGFN gloves are ultra-thin and CFIA compliant with features for a wide range of operations. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance while their foam nitrile palms are non-marring and offer steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel.
-
Dexterity® S18KGFN
Product ID: S18KGFNStrong grip, cut-resistant, touchscreen compatible gloves
ANSI Level A3 cut protection, a grip-strengthening foam nitrile palm coating and a close, tactile feel allows these high-dexterity gloves to excel at handling small parts and completing precise tasks. They’re made with cut-resistant DuPont™ Kevlar® fiber and have been treated with an active agent to achieve a 99.9% antimicrobial status. They’re also touchscreen compatible for added convenience.
-
Dexterity® S15NT
Product ID: S15NTComfort and dexterity that protects against punctures and abrasion
These versatile gloves are proudly made in Canada from a 100% cotton seamless knit shell that provides outstanding dexterity and comfort. A nitrile-dipped palm coating, which over time, forms to fit the user’s hand, offers ANSI Level 4 abrasion resistance and ANSI Level 2 puncture resistance. An additive in the nitrile coating makes these gloves 100% biodegradable.
-
TenActiv™ S13TAFNT
Product ID: S13TAFNTLong-lasting cut-resistant gloves with a strong grip
These cut-resistant gloves were designed with comfort and durability in mind. They feature ergonomic shaping and a snug fit, and a nitrile coating that offers a firm grip on slick and oily surfaces. The coating has been Factored™ for enhanced longevity and continued effectiveness after washing. The gloves are entirely free of latex, and have been treated with an active agent to achieve a 99.9% antimicrobial status
-
Dexterity® S13FRNE
Product ID: S13FRNEArc Flash tested gloves that guard against flames and cuts
An engineered yarn that blends DuPont™ Kevlar® fiber with flame-resistant fibers gives these gloves an Arc Flash testing level of 2, as well as ANSI Level 3 abrasion resistance, 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. Their knit shell construction ensures that the hands still enjoy a wide range of movement and neoprene-coated palms provide a strong, steady grip even in wet or oily conditions. Treated with an active agent to achieve a 99.9% antimicrobial status.
-
Emerald CX® SWTACSL
Product ID: SWTACSLExtreme durability and comfort matched with 360° cut resistance
Made from a tough blend of TenActiv™, steel and composite filament fiber, these durable gloves offer 360° ANSI Level A6 cut protection. They also feature an inner cotton liner that keeps hands dry and comfortable and have been treated with Size-Lock™ to prevent shrinkage even with regular washing.
-
Contender™ SPGC2D
Product ID: SPGC2D360° cut protection combined with a strong, steady grip
Made from advanced composite yarns that provide 360° ANSI Level A4 cut protection, these 7-gauge knit gloves are created through a unique spinning process that ensures consistent cut and abrasion resistance across the entire glove surface area. They also feature PVC dotting on the front and back for a tighter, steadier grip. Thanks to their seamless string knit, hands enjoy high levels of comfort and dexterity.
-
Contender™ SPGC
Product ID: SPGC360° cut protection matched with comfort and dexterity
Made from advanced composite yarns that provide 360° ANSI Level A4 cut protection, these 7-gauge knit gloves are created through a unique spinning process that ensures consistent cut and abrasion resistance across the glove’s full surface area. Thanks to their seamless string knit, hands enjoy high levels of comfort and dexterity.