-
TenActiv™ S18TAPN
Product ID: S18TAPNCut-resistant gloves that are softer than typical cut protection and will not irritate skin
Our TenActiv™ S18TAPN cut resistant gloves are made from a soft material that is non-irritating while still protecting hands for more comfortable all-day wear. These gloves feature no additives like steel or fiberglass ensuring they will not irritate skin when worn. Made from TenActiv™ engineered yarn to provide 360° cut protection with moderate ANSI A5 cut resistance. The micropore nitrile palm coating offers steady wet grip that is touchscreen compatible while the reinforced thumb crotch protects against wear and tear when material handling.
-
TenActiv™ S18TAPNVB
Product ID: S18TAPNVBCut-resistant gloves that are softer than typical cut protection and will not irritate skin plus impact protection
Our TenActiv™ S18TAPNVB cut resistant gloves provide impact protection and are made from a soft material that is non-irritating while still protecting hands for more comfortable all-day wear. These gloves feature no additives like steel or fiberglass ensuring they will not irritate skin when worn. Made from TenActiv™ engineered yarn to provide 360° cut protection with moderate ANSI A5 cut resistance and offer impact protection against knocks and bumps. The micropore nitrile palm coating offers steady wet grip that is touchscreen compatible while the reinforced thumb crotch protects against wear and tear when material handling.
-
TenActiv™ STXLPNRVB
Product ID: STXLPNRVBCold-rated extreme cut protection with impact resistance for high hazard environments
Our TenActiv™ STXPNRVB gloves are designed to perform in any environment that presents a high level of cut and impact hazards while keeping hands warm down to -5°C / 23°F. They feature both a TenActiv™ engineered yarn knit for extreme cut resistance and back-of-hand impact protection against knocks and bumps. Hi-viz back of hand bumpers offer worker hand placement visibility while micropore nitrile palms offer a steady wet grip.
-
Emerald CX® S13CXLSI
Product ID: S13CXLSIHeat resistant non-marring gloves with cut protection and adhesive resistance for handling hot objects
Our Emerald CX® S13CXLSI gloves feature an acrylic lining to help achieve ANSI 4 heat resistance for handling hot objects. They offer 360° cut protection with a silicone palm coating designed to resist the stickiest of adhesives and repel liquids. These ultra-thin gloves also maximize workers’ sense of touch while protecting materials like glass and metal from fingerprints thanks to their non-marring coating. A reinforced thumb crotch reduces wear in critical areas.
-
TenActiv™ STXPNRPVB
Product ID: STXPNRPVBHi-viz gloves with padded palms for vibration dampening and extreme cut protection plus impact protection
Our TenActiv™ STXPNRVB feature padded palms for vibration dampening and extreme cut protection plus impact protection. They’re made from TenActiv™ engineered yarn to provide 360° cut protection with the industry’s highest ANSI A9 cut resistance plus back-of-hand impact protection against knocks and bumps. Designed to perform in any environment that presents a high level of cut and impact hazards, they also feature a hi-viz color for visibility and worker hand placement while micropore nitrile palms offer grip in wet conditions.
-
TenActiv™ S21TXUFNLTC
Product ID: S21TXUFNLTCMaximum cut protection with reinforced thumb crotch for durability
Our TenActiv™ S21TXUFNLTC gloves provides the industry’s highest level of cut protection in a thin 21-gauge knit for a barehand feel. They feature a reinforced leather thumb crotch for added durability and wear making them ideal extreme cut hazard tasks that require added abrasion resistance. The ultra-thin foam nitrile palm coating is touchscreen compatible and provides a strong, steady grip when working in lightly oiled conditions.
-
TenActiv™ STXPNRVB
Product ID: STXPNRVBHi-viz gloves with extreme cut protection and impact resistance for high hazard environments
Our TenActiv™ STXPNRVB feature both a TenActiv™ engineered yarn knit for extreme cut resistance and back-of-hand impact protection against knocks and bumps. Designed to perform in any environment that presents a high level of cut and impact hazards, they also feature a hi-viz color for visibility and worker hand placement while micropore nitrile palms offer a steady wet grip.
-
ClutchGear® MXVSBE
Product ID: MXVSBEEconomical mechanics style gloves for protection against cuts and impact
Our Clutch Gear® MXVSBE mechanics gloves are an economical choice designed to protect against minor hazards. They offer 360° ANSI A2 cut resistance as well as back-of-hand ANSI 1 impact protection against knocks and bumps. Palm and fingertip patches offer steady grip. These gloves are ideal for material handling and other tasks requiring minor hazard protection.
-
TenActiv™ STAGBMPVB
Product ID: STAGBMPVBErgonomically shaped microfiber palms for more grip and dexterity than typical leather plus extreme cut resistance
Our TenActiv™ STAGBMPVB gloves feature ErgoHyde microfiber palms that provide improved hand movement and more grip than typical leather. TenActiv™ engineered yarn provides 360° cut protection with extreme ANSI A7 cut resistance, plus hi-viz back-of-hand bumpers offer improved hand placement visibility and ANSI 2 impact protection. Treated to resist water and liquids, their ErgoHyde palms offer an outstanding range of motion plus strong grip in wet conditions.
-
Dexterity® S15GPNVB
Product ID: S15GPNVBThin gloves with cut and impact protection plus micropore nitrile palm coating for steady wet grip
Our Dexterity® S15GPNVB gloves offer cut resistance and impact protection plus a micropore nitrile palm coating for better wet grip. They provide 360° of cut protection with ANSI level 5 cut resistance plus back-of-hand ANSI 2 impact protection against knocks and bumps. Micropore nitrile palm coating offers a steady wet grip and helps prevent water from seeping in.
-
TenActiv™ STAGBLPVB
Product ID: STAGBLPVBErgonomically shaped leather palms for more grip and dexterity than typical leather plus extreme cut resistance
Our TenActiv™ STAGBLPVB gloves feature ErgoHyde leather palms that provide improved hand movement and more grip than typical leather. TenActiv™ engineered yarn provides 360° cut protection with extreme ANSI A8 cut resistance, plus hi-viz back-of-hand bumpers offer improved hand placement visibility and ANSI 2 impact protection. Treated to resist water and liquids, their ErgoHyde palms offer an outstanding range of motion plus strong grip in wet conditions.
-
Endura® 398GDP
Product ID: 398GDPThe next generation safety glove delivers unbeatable comfort and durability
We’ve made our classic safety gloves even better. Re-engineered using modern glove design and technology, these gloves feature a double-layered goatskin palm for increased durability while remaining supple for better dexterity than typical double-palmed safety gloves. The sewing thread is made with Kevlar® fiber for added seam integrity. And the cuff expands, allowing for a comfortable fit over a jacket or sleeve.
-
Dexterity® S13PFNP
Product ID: S13PFNPHighly dexterous, puncture-resistant gloves with a strong grip
Made from a 13-gauge polyester shell, these gloves provide ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. Leather patches placed at the palm and thumb crotch areas boost puncture resistance to ANSI Level 5. These dexterous gloves remain highly flexible while protecting from punctures and scrapes. A nitrile palm coating provides a strong, steady grip.
-
TenActiv™ STAGFNP
Product ID: STAGFNPLightweight, strong grip gloves that guard against cuts and punctures
A 13-gauge TenActiv™ shell provides these lightweight gloves with ANSI Level 4 abrasion resistance and 360° ANSI Level A4 cut protection without impeding dexterity or mobility. Leather palm patches placed at the palm and thumb crotch reinforce critical wear areas boost puncture resistance to ANSI Level 5. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions while providing ANSI Level 3 palm puncture resistance.
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNWaterproof cut-resistant gloves that keep hands warm down to -10°C / 14°F
This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ knit assures ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ S18WTFN
Product ID: S18WTFNWater and wind protection with laminated anti-slip layers for better grip plus cut resistance
Our waterproof and windproof TenActiv™ S18WTLFN gloves protect skin from harsh environments while remaining breathable. The unique membrane lamination prevents layers from slipping, providing a comfortable fit and reliable grip. TenActiv™ engineered yarn material provides 360° cut protection with ANSI A4 cut resistance plus the foam nitrile palm coating offers a steady wet grip.
-
Endura® 398OBPB
Product ID: 398OBPBPuncture-resistant MIG welding gloves with cut and heat protection
Designed specifically for MIG welding, these gloves feature Punkban™ for ASTM Level 5 hypodermic puncture protection on the thumb and index finger to guard against common welding wire injuries. In addition, the gloves achieved an ANSI Level 3 heat rating and feature a lining made with DuPont™ Kevlar® fiber for 360° cut resistance with ANSI Level A6 cut protection. Their 5″ gauntlet cuffs offer a wider area of coverage. Cushioned wrists ensure comfort during long working days. Black goatskin leather hides grease and oil stains.
Sold in left-handed (398OBPBLH) and right-handed (398OBPBRH) versions: one of the gloves in the pair features Punkban™ on the thumb and index finger for ANSI Level A5 hypodermic puncture resistance in these areas.
-
Cool Grip® TBMOB
Product ID: TBMOB17” baker's mitts that repel oil and water
These tough 17″ baker’s mitts are made from a preshrunk, heavyweight cotton treated to resist water and liquids. They’re fully lined with 11oz of knit cotton for extra comfort and insulation and are fully CFIA-compliant for safe hood handling. Extra-strong, pre-serged inside seams and reinforced Twaron® thumb patches increase their lifespan.
Also available with 4″ cuff without liquid resistance; TBM4 (Made to Order)
-
Dexterity® S13KGPN
Product ID: S13KGPNA superior grip combined with 360° cut protection
A micropore nitrile coating that creates tiny, suction cup-like craters on the palms gives these gloves an unsurpassed level of grip on wet and oily surfaces. Their DuPont™ Kevlar® fiber construction provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 2 puncture resistance. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas. These gloves are fully launderable, allowing them to be cleaned and refreshed with ease.
-
Dexterity® S13KFGFNT
Product ID: S13KFGFNT360° cut protection matched with a strong, steady grip
These 13-gauge knit gloves match outstanding dexterity with cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance. A foam nitrile coating at the palms provides a firm grip on lightly oiled surfaces. A reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
Emerald CX® S13CXPNT
Product ID: S13CXPNTSilicon-free touchscreen compatible gloves with protection against cut and heat hazards plus wet grip
Our Emerald CX® S13CXPNT gloves are silicon-free, protect against cut and heat hazards, and are touchscreen compatible. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A6 cut resistance and ANSI 5 heat protection. Micropore nitrile palm coating offers a steady wet grip and helps prevent water from seeping in.
-
TenActiv™ STAGPN
Product ID: STAGPNCut resistant gloves with a strong and steady grip
These 13-gauge gloves feature a TenActiv™ composite filament fiber yarn that provides ANSI Level A5 cut protection, while a micropore nitrile coating ensures a steady grip even on wet or oily surfaces. They’re breathable and ergonomically shaped for a high degree of comfort and they further enhance safety by offering ANSI Level 4 abrasion resistance. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ STAFGFNT
Product ID: STAFGFNTTouchscreen compatible moderate cut protection with a steady wet grip
Our TenActiv™ STAFGFNT gloves provide moderate cut protection with touchscreen compatible steady wet grip. TenActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance. Foam nitrile palm coating offers steady wet grip and touchscreen compatibility to seamlessly move between tasks. Ideal for general use work.
-
TenActiv™ STACXPURT
Product ID: STACXPURTCut-resistant with maximum abrasion and reinforced thumb crotch for extra durability and dexterity when material handling
Our maximum abrasion TenActiv™ STACXPURT gloves with polyurethane palm coating and nitrile reinforced thumb crotch add extra durability and dexterity when material handling. The TenActiv™ engineered yarn liner provides 360° cut protection with high ANSI A6 cut resistance. Touchscreen compatible non-marring gloves are suitable when dealing with finished metal and glass material.