Show Filters

ORDER BY

PRODUCT TYPE

ABRASION

ARC FLASH

CHEMICAL

COLD

CUT

CRUSH

HEAT

FLAME

IMPACT

VIBRATION

PUNCTURE (HYPODERMIC)

PUNCTURE (BLUNT PROBE)

FEATURES + TECH

MATERIAL

PALM COATING

PALM COATING DIP TYPE

CUFF STYLE

Show Filters
ORDER BY
PRODUCT TYPE
ABRASION
ARC FLASH
CHEMICAL
COLD
CUT
CRUSH
HEAT
FLAME
IMPACT
VIBRATION
PUNCTURE (HYPODERMIC)
PUNCTURE (BLUNT PROBE)
FEATURES + TECH
MATERIAL
PALM COATING
PALM COATING DIP TYPE
CUFF STYLE
  • TenActiv™ STAGLXPB

    Product ID: STAGLXPB

    Our STAGLXPB gloves are designed to meet the hand protection requirements of the materials recovery and recycling industries, delivering maximum cut protection – rating ANSI Level A9 cut resistance on the palm and ANSI Level A5 cut resistance on the back of hand. They also offer ultimate puncture resistance – ANSI Level 5 hypodermic puncture resistance – thanks to a latex palm coating and a layer of Punkban™ lining the palm.

  • Endura® 398GDP

    Product ID: 398GDP

    We’ve made our classic safety gloves even better. Re-engineered using modern glove design and technology, these gloves feature a double-layered goatskin palm for increased durability while remaining supple for better dexterity than typical double-palmed safety gloves. The sewing thread is made with Kevlar® fiber for added seam integrity. And the cuff expands, allowing for a comfortable fit over a jacket or sleeve.

  • Dexterity® S10LXPB

    Product ID: S10LXPB

    Hypodermic needles are no match for these 10-gauge cotton polyester knit gloves, which feature Punkban™ protection at the palms and fingers for ANSI Level 5 puncture resistance. They are also ANSI Level 5 cut resistant. A latex coating ensures a steady grip in wet or dry conditions, and the lightweight properties of Punkban™ make these gloves highly dexterous, flexible and comfortable.

  • North Sea™ NS300B

    Product ID: NS300B

    These chemically resistant gloves feature a PVC formulation that provides outstanding flexibility and ensures that they won’t stiffen or crack in cold temperatures. Rough-finished palms provide a sturdy grip even in wet, slippery conditions, and triple foam lining increases warmth. Safety cuffs and a shorter length allow for easy on and off.

  • North Sea™ NS330

    Product ID: NS330

    These chemically resistant gloves feature a PVC formulation that gives them outstanding flexibility and ensures that they won’t stiffen or crack in cold temperatures. Rough-finished palms provide a sturdy grip even in wet, slippery conditions. They’re also CFIA-compliant for safe food handling.

  • Clutch Gear® MXHVPB

    Product ID: MXHVPB

    Palms lined with Punkban™ combined with a material woven with DuPont™ Kevlar® fiber provide these mechanic gloves with ANSI Level 4 hypodermic puncture resistance. They also include ANSI Level A3 cut protection. Hi-viz lime-green backs provide enhanced visibility, and Sure Grip® palm patches reduce the risk of slippage. Their elasticized cuffs guarantee a secure, comfortable fit, and soft fabric patches on the thumbs wipe away sweat.

  • Clutch Gear® MXHV2PB

    Product ID: MXHV2PB

    Full Punkban™ lining at the front and the back of the glove combined with a material woven with DuPont™ Kevlar® fiber provides ANSI Level 5 puncture resistance. These gloves also include ANSI Level A5 cut protection, making them an excellent choice for handling hypodermic needles. Their hi-viz lime green backs improve visibility, and adjustable Velcro tabs at the back of the wrist allow for a snug, secure fit. PVC Sure Grip® palm patches ensure that nothing will slip through the fingers.

  • Endura® 304KGTL

    Product ID: 304KGTL

    No hand-warming feature has been overlooked in the creation of these tough, cut-resistant goatskin mitts. Composite blended liner provides 360° ANSI Level A4 cut protection and G200 Thinsulate™ for exceptional warmth, these slip-on mitts are cold-rated down to temperatures of -30°C / -22°F . Elasticized wrists and faux fur cuffs capture warmth and block out cold, while a pair of plastic clips ensure they won’t be separated in storage.

  • Endura® 385CS

    Product ID: 385CS

    These gloves can stop a chain saw running at 3140 feet per minute. How? These gloves have been tested against European Standard EN 381-7. Eight layers of woven DuPont™ Kevlar® fiber wrapped around a chainsaw’s drive sprocket halts it at the moment of contact. Afterwards, the gloves will have to be replaced—but your hand won’t. Water-resistant nylon backings ensure a tight, non-slip grip, and hi-viz backs improve visibility. Elasticized Velcro wrists secure the fit and keep debris at bay.

  • Endura® 66Q

    Product ID: 66Q

    These durable fitter gloves don’t skimp on safety. They’re made from heavyweight split-leather and feature leather reinforcement at the palms, index fingers and thumbs. Gunn-cut styling eliminates exposed seams from the palm area, and slightly extended cuffs provide a higher zone of coverage.

  • Endura® 76YBDQ

    Product ID: 76YBDQ

    These tough work gloves are built for everyday use and feature top-grain cowhide leather for protection from minor abrasions and scrapes. Inside lining at the palm increases comfort while absorbing sweat to provide a strong, steady grip, while 2.5″ safety cuffs increase coverage to protect forearms.

  • Endura® 76GR

    Product ID: 76GR

    These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. 4.25″ rubberized gauntlet cuffs increase their zone of coverage, and a light resistance to water and oil further boosts their versatility. The addition of an absorbent cotton palm lining keeps hands dry.

  • Endura® 76BFTL

    Product ID: 76BFTL

    These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. A bandtop cuff allows hands to slide in and out with ease, and Thinsulate™ lining offers winter protection in temperatures down to -15°C / 5°F.

  • Vibrastop™ S10VIB

    Product ID: S10VIB

    These tough, 10-gauge nylon gloves are padded with a vibration-dampening layer of polymer, making them a must for anyone working with or around a jackhammer. They’re machine washable for easy refresh and rot-resistant for a longer lifespan. Elasticized wrists provide a snug, comfortable fit.

  • Endura® 378GOTTL

    Product ID: 378GOTTL

    These winterized, close-fitting driver gloves have hi-viz orange fingertips that improve safety by making hands and fingers highly visible even in trying conditions. They’re built from high-tensile, abrasion-resistant goatskin, and feature a keystone thumb design that maximizes durability. 100g of Thinsulate™ lining keeps hands warm and safe in temperatures down to down to -30°C / -22°F.

  • Endura® 378GOT

    Product ID: 378GOT

    These close-fitting driver gloves feature hi-viz orange fingertips that improve safety by making hands and fingers highly visible even in trying conditions. They’re built from high-tensile, abrasion-resistant goatskin, and feature a keystone thumb design that maximizes durability.

  • Endura® 76B

    Product ID: 76B

    These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. A bandtop cuff allows hands to slide in and out with ease, and light resistance to water and oil further increases their versatility.

  • Endura® 69BSKFFL

    Product ID: 69BSKFFL

    These tough split-leather gloves offer ANSI Level 4 puncture resistance and are lined with a DuPont™ Kevlar® fiber blend for 360° ANSI Level A5 cut protection. They’re a heavy-duty work glove that fuses durable construction with a high level of cut resistance. Sewing thread is made with Kevlar® fiber for added seam integrity. A Gunn-cut pattern prevents seams from being easily exposed or worn away. Their palms are reinforced with 1.4 mm side-split leather for extra durability and the backs feature elasticized wrists for a closer fit.

  • Endura® 66BRBOA

    Product ID: 66BRBOA

    These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers and are reinforced at the fingertips to offer a higher level of protection to the areas that need it most. Safety is further enhanced by knuckle straps and 2.5″ rubberized safety cuffs improve wrist protection while allowing for an easy fit. All-over lining provides warmth and comfort in cold conditions.

  • Endura® 66B

    Product ID: 66B

    These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers, are reinforced at the fingertips, and include knuckle straps to offer a higher level of protection for the areas that need it most. A gunn-cut pattern eliminates exposed seams in the hard-working palm area, and a cotton lining improves comfort while wicking away sweat.

No products in your box.