-
Endura® 378GKGVBE
Product ID: 378GKGVBEEconomic choice for shutdown and turnaround maintenance
Our Endura® 378GKGVBE goatskin gloves protect hands from cut hazards and knocks and bumps, making them ideal for shutdown and turnaround maintenance. They feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A6 cut resistance, impact protection against knocks and bumps, and padded palms for vibration dampening and comfort when material handling.
-
Endura® 378GKGTVBE
Product ID: 378GKGTVBEVibration-dampening driver gloves with 360° cut resistance and winter protection down to -25°C / -13°F
These high-performing winter driver gloves are made from built-tough goatskin lined with Thinsulate™️ for winter protection in temperatures down to -25°C / -13°F. Their TenActiv™️ lining provides 360° ANSI Level A6 cut protection, and a padded palm reduces vibration to improve grip. Impact-resistant inserts at the back of the hand guard against knocks and bumps without compromising flexibly.
-
Endura® 378GKGE
Product ID: 378GKGEEconomic choice for flash fire protection with cut resistance
Our Endura® 378GKGE goatskin gloves are an economic choice that protects against arc flash, cuts, and flame. Made with material designed to resist flame, they are arc flash-rated level 3 with an ATPV of 36 cal / cm² and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with moderate ANSI A4 cut resistance.
-
Endura® 378CXGOB
Product ID: 378CXGOBMaximum cut-resistant leather for extreme cut hazards plus heat protection and liquid resistance
Our Endura® 378CXGOB leather gloves offer heat resistance and maximum protection against cut hazards. ParaActiv™ engineered yarn liner provides 360° cut protection with extreme ANSI A9 cut resistance and ANSI 3 heat protection. Treated to resist water and liquids.
-
Endura® 378AFL
Product ID: 378AFLClose-fitting, hard-wearing winter driving gloves
These winter driver gloves are made from tough cowgrain leather that resists abrasions, repels water and will form to the hands over time for a closer, comfortable fit. The keystone thumb design maximizes durability and dexterity, while elasticized backs make the fit snug yet flexible. A full fleece lining provides fingers with much-needed warmth in winter conditions.
-
Endura® 378A
Product ID: 378ADurable cowhide gloves for low hazard protection and material handling
Our Endura® 378A gloves provide durable protection from scuffs and scrapes, making them ideal for material handling, light construction tasks, and low hazard site clean up. The keystone thumb design maximizes durability for a longer wear life while the elasticized wrists offer a snug fit for all day comfort.
-
Endura® 365DLXDTL
Product ID: 365DLXDTLExtended cuff lineman gloves with double-weighted lining that keep hands warm down to -15°C / 5°F
Our Endura® 365DLXDTL gloves feature double-weighted lining for cold protection along with 6-inch cuffs with hi-viz bands for visibility and added protection. The Thinsulate™ lining keeps hands warm in cold temperatures down to -15°C / 5°F.
-
Endura® 365DLX2KG
Product ID: 365DLX2KGBuilt-tough lineman gloves with enhanced visibility
These heavy-duty cowgrain leather lineman gloves meet the ANSI/ISEA 107-2015 standard for high visibility, thanks to cuffs that feature 3M™ retroreflective silver strips accompanied by high-viz bands. Their water, oil and stain-resistant properties increase resilience, while ParaActiv™ fiber and split-leather at the cuffs make them highly durable. Performance patches at the thumb and palm add extra durability in critical high-wear areas.
-
Endura® 361DLXFTL
Product ID: 361DLXFTLCold-rated lineman mitts that keep hands warm down to -20°C / -4°F
Our Endura® 361DLXFTL lineman mitts are designed to keep hands warm in winter weather down to -20°C / -4°F. The combination of a claw design along with a Thinsulate™ liner provides both warmth and comfort in frigid temperatures. Made from durable horse leather, they feature double-leather palm patches in high-wear areas to protect against wear and tear. These mitts are treated to repel water, liquids, and stains and feature extended cuffs with hi-viz bands.
-
Endura® 304BOA
Product ID: 304BOADurable mitts built for extreme cold weather protection down to -35°C / -31°F
The solution to cold fingers lies inside these durable mitts built from tough cowgrain that offer protection in temperatures down to -35°C / -31°F. They’re lined with layers of pillow-soft insulation that trap heat inside and have elasticized wrists that prevent cold air from entering. As a bonus, a pair of helpful metal clips allow the mitts to be bound together when not in use.
-
Endura® 76B
Product ID: 76BFitter style gloves with loose fit and grain leather for comfort and all-day wear
Our Endura® 76B fitter style gloves are loose fitting for comfortable all-day wear. Grain leather palms improve dexterity and liquid resistance while the cotton lining helps wick away sweat for breathability and comfort. A bandtop cuff allows for easing donning and removal. Ideal for everyday tasks such as material handling and general labor.
-
Endura® 69BSKFFL
Product ID: 69BSKFFLDurable leather fitter style gloves with high cut protection
Our Endura® 69BSKFFL fitter style gloves offer protection against cut hazards and abrasion for a long wear life. TenActiv™ engineered yarn liner provides 360° cut protection with ANSI A5 cut resistance. They feature reinforced premium split-leather and are sewn with ParaActiv™ thread for added seam integrity to increase durability for a long wear life.
-
Endura® 66BRBOA
Product ID: 66BRBOADurable split-fitter gloves with extra wrist protection and a warm, winter-proof lining
These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers and are reinforced at the fingertips to offer a higher level of protection to the areas that need it most. Safety is further enhanced by knuckle straps and 2.5″ rubberized safety cuffs improve wrist protection while allowing for an easy fit. All-over lining provides warmth and comfort in cold conditions.
-
Endura® 66B
Product ID: 66BBuilt-tough, split-leather fitter gloves for rugged wear
These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers, are reinforced at the fingertips, and include knuckle straps to offer a higher level of protection for the areas that need it most. A gunn-cut pattern eliminates exposed seams in the hard-working palm area, and a cotton lining improves comfort while wicking away sweat.
-
Endura® 378GKGVB
Product ID: 378GKGVBMulti-hazard protection with liquid and water resistance for heavy machine operation and maintenance
Our Endura® 378GKGVB goatskin gloves provide multi-hazard protection for heavy machine operation and maintenance, where resistance to liquids is a must. Made with material designed to resist flame, they are arc flash-rated level 3 with an ATPV of 33 cal / cm², offer ANSI 5 heat resistance, and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A5 cut resistance. Treated to resist water and liquids, they feature impact protection against knocks and bumps and padded palms for comfort when material handling.
-
Endura® 378GOBDTK
Product ID: 378GOBDTKPuncture-resistant, oil and water repelling gloves for work in extreme cold
Intended for use in extreme cold, these driver gloves are made from a tough goat-grain leather that provides ANSI Level 4 puncture resistance. They feature a Thinsulate™ lining to keep hands warm in temperatures down to -30°C / -22°F. An Oilbloc™ treatment provides a high level of oil resistance while a Waterstop™ treatment repels oil, water and stains. Furthermore, a knitwrist turtleneck cuff extension locks in warmth.
-
Endura® 505BUWS
Product ID: 505BUWSDurable, extended gauntlet Stick/Arc welding gloves with superior heat protection
These gloves are made with choice, rugged cowhide selected from the shoulder-split for the highest level of durability. A wide thumb strap further reinforces durability. Sewing thread is made with ParaActiv™ fiber for added seam integrity and heat resistance. Extended gauntlet cuffs further safeguard hands from sparks and heat.
-
Endura® 378GKGDT
Product ID: 378GKGDTGeneral purpose protection against cuts plus cold protection down to -20°C / -4°F
Our Endura® 378GKGDT gloves keep hands warm down to -20°C / -4°F and offer cut protection plus oil resistance. The ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A5 cut resistance. Keystone thumb design helps improve durability without impeding dexterity, making it suitable for material handling.
-
Endura® 378GHVTL
Product ID: 378GHVTLHi-Viz built-tough gloves that provide winter protection down to -30°C / -22°F
These built-tough goatskin gloves provide ultimate visibility even in trying conditions thanks to yellow hi-viz and Scotchlite™ retro-reflective stripes on the back of the hand. Thinsulate™ lining ensures that hands stay warm in temperatures down to -30°C / -22°F . Elasticized backs make sure that the fit secure.
-
Endura® 378GAX
Product ID: 378GAXAbrasion resistant driver gloves crafted with comfort in mind
Stretchy Spandex backs make these driving gloves highly flexible and breathable. Their wing thumb design increases flexibility and provides a closer, more comfortable fit. Goatskin palms deliver a higher degree of abrasion resistance to the areas that need it most, and a gunn cut pattern increases the gloves’ lifespan by eliminating the need for seams in high-wear areas.
-
Endura® SPL4
Product ID: SPL4High coverage welder's spats that guard against sparks and heat
Built with welders in mind, these spats are sewn with DuPont™ Kevlar® fiber to protect feet, shins, and shoes from sparks and heat. They’re made from a heat-resistant side split leather and feature a wide elastic sole strap with a Velcro® closure for a fast, convenient fit. Their 6.5″ height provides a higher level of coverage for extra peace of mind.
-
Endura® 375GTVB
Product ID: 375GTVBWinter impact protection for temperatures down to -20°C / -4°F
These winter-ready driver gloves provide warmth down to temperatures of -20°C / -4°F. Tough goatskin leather treated with Oilbloc™ ensures top-notch oil resistance. They benefit from enhanced back-of-hand protection that dulls impact without impeding ease of movement, and the strategic placement of double-weight Thinsulate™ provides warmth where it’s needed most while ensuring mobility, flexibility and dexterity.
-
Endura® 365DLXTKG
Product ID: 365DLXTKGCut-resistant extended cuff lineman gloves that keep hands warm down to -15°C / 5°F
Our Endura® 365DLXTKG gloves offer cold protection and cut resistance along with 6-inch cuffs for added wrist protection. The ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance along with hi-viz bands on cuffs for visibility. The Thinsulate™ lining keeps hands warm in cold temperatures down to -15°C / 5°F.
-
Endura® 361DLXWL
Product ID: 361DLXWLA one finger lineman mitt built tough for extreme cold (-45°C / -49°F)
These heavy-duty mitts built from specially selected horsehide leather are wool lined for warmth in temperatures down to -45°C / -49°F. Their gauntlet cuffs are marked by retroreflective silver strips and a hi-viz overlay to assure maximum visibility. Sewing thread is made with ParaActiv™ fiber for added seam integrity. A leather performance patch at the palm makes them extra-hard wearing, and a removable, washable lining makes it easy to keep them fresh and clean.