-
Dexterity® S13BFNT
Product ID: S13BFNTFlexible, nitrile-dipped work gloves with a strong, steady grip
These polyester work gloves are made from recycled material in a seamless-knit shell. They’re quick-drying and moisture wicking while providing ANSI Level 4 abrasion resistance and ANSI Level 2 puncture resistance. Foam nitrile at the palms provides a strong, steady grip, and the back-of-the-hand has been left uncoated for maximum comfort and flexibility.
-
Clutch Gear® MXGCEHVB
Product ID: MXGCEHVBImpact-blunting high visibility mechanics gloves
These goatskin mechanic gloves feature thermoplastic rubber patches at the back of the hand and fingers for outstanding impact resistance. Their split leather palm patches and reinforced thumb crotches increase durability, and wide elastic straps allow for an easy fit. Ergonomic shaping improves comfort, and flexible spandex give hands an outstanding range of movement. Thanks to their hi-viz backing, visibility won’t be an issue on the job site.
-
Clutch Gear® MXGBE
Product ID: MXGBEAll-purpose mechanic gloves with a strong grip, optimized for wet or cold conditions
These mechanic gloves are built from quick-drying synthetic leather that performs well in wet or cold conditions, and benefit from flexible, foam-laminated spandex backs that allow for a high degree of dexterity. Their ergonomic shaping guarantees all-day comfort, and wide elastic cuffs with adjustable backs allow for a close, custom fit. Select areas are reinforced by PVC Diamond Grip patches with Poron® padding for a higher degree of durability and better grip.
-
Clutch Gear® MXBE
Product ID: MXBEEconomic choice mechanic gloves with a high level of dexterity for light material handling
Our Clutch Gear® MXBE are an economic choice mechanic gloves with reinforced thumb crotch for light material handling and fourchette inserts to increase comfort and hand motion. They also feature hook and loop wrist closures for a snug fit and stretch-nylon backs that guard against bumps and scrapes.
-
Superior® MLNF
Product ID: MLNFLightweight, fully washable, lint-free painter's gloves
These painter’s gloves are made from a lint-free nylon that optimizes them for any application where dust or particles may pose a concern, or when surfaces must be protected from scratches, oils, and fingerprints. They’re lightweight, comfortable, and feature a slip-on fit for easy on and off. Fully launderable, they can be easily refreshed after messy jobs.
-
Endura® 385CS
Product ID: 385CSHi-Viz gloves that can stop a chain saw dead in its tracks
These gloves can stop a chain saw running at 3140 feet per minute. How? Eight layers of woven DuPont™ Kevlar® fiber wrapped around a chainsaw’s drive sprocket halts it at the moment of contact. Afterwards, the gloves will have to be replaced—but your hand won’t. Water-resistant nylon backings ensure a tight, non-slip grip, and hi-viz backs improve visibility. Elasticized Velcro wrists secure the fit and keep debris at bay.
-
Ground Hog™ 14012GH
Product ID: 14012GHStatic grounding gloves that eliminates electrostatic paint spray-back while keeping hands protected
Our Ground Hog™ 14012GH cleanroom-processed gloves feature highly conductive continuous silver strips on palms that run from the inside of the glove to the outside to help ground workers and avoid paint spray-back. The lint-free laminated polyurethane fabric resists solvents and are cleanroom-processed to avoid shedding materials and prevent paint contamination. Made with latex-free materials to reduce the risk of allergies.
-
Endura® 505KGWS
Product ID: 505KGWSArc/Stick welding gloves with full forearm protection and 360° cut resistance
Extra-long gauntlets provide these stick welding gloves with a generous amount of protection from heat and sparks, and their ParaActiv™ engineered yarn liner delivers 360° ANSI Level A5 cut protection, ANSI Level 5 puncture resistance, and and ANSI Level 2 heat resistance. Their choice cowhide construction, one-piece backs and wide thumb straps with split patches boost durability. Sewing thread is made with ParaActiv™ engineered yarn for added seam integrity.
-
Endura® 505BU
Product ID: 505BUDurable, extended gauntlet Stick/Arc welding gloves with superior heat protection
These gloves are made with choice, rugged cowhide selected from the shoulder-split for the highest level of durability. A wide thumb strap further reinforces durability. Sewing thread is made with Kevlar® fiber for added seam integrity and heat resistance. Extended gauntlet cuffs further safeguard hands from sparks and heat.
-
Endura® 399GKGL5
Product ID: 399GKGL5All-round fabrication and MIG welding glove with arc flash protection
Our Endura® 399GKGL5 goatskin gloves are ideal for MIG welding and all-round fabrication use. Made with material designed to resist flame, these gloves are arc flash-rated level 3 with an ATPV of 36 cal / cm² and feature ParaActiv™ thread for added seam integrity and durability. They also feature a ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A4 cut resistance and ANSI 3 heat protection while extended gauntlet cuffs provide extra wrist protection.
-
Endura® 378GKVSB
Product ID: 378GKVSBImpact and liquid resistant plus padded palms for material handling
Our Endura® 378GKVSB leather gloves resist liquid and protect against impact hazards. Featuring back-of-hand bumpers for ANSI 2 impact protection against knocks and bumps, they’re treated to resist water and liquids. Padded palms offer comfort when material handling.
-
Endura® 375GKGVB
Product ID: 375GKGVBImpact-resistance with 360° cut protection and vibration dampening
The ParaActiv™ engineered yarn lining within these tough goatskin driver gloves offers 360° ANSI Level A5 cut protection. Medium-duty impact-resistant back-of-hand protection safeguards hands with minimal effect on flexibility and dexterity. Gel pads at the palm counteract vibrations, and an Oilbloc™ treatment assures the highest level of oil and water resistance.
-
Endura® 375CSI
Product ID: 375CSIEconomic choice unlined gloves with grain leather palms for added dexterity, durability, and sense of feel
Our economic choice Endura® 375CSI leather gloves are unlined to provide a better sense of feel and hand motion. Cow grain leather palms improve durability and naturally resist liquids, while gauntlet cuffs provide extra wrist safety and allows for easier donning and removal.
-
Endura® 370GFKL
Product ID: 370GFKLMIG welding gloves with fine touch sensitivity
Our Endura® 370GFKL goatskin MIG welding gloves balance cut and heat protection with touch sensitivity. These gloves feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with low ANSI cut A2 cut resistance and ANSI 3 heat protection and spark resistance while extended gauntlet cuffs provide extra wrist protection.
-
Endura® 370CTIG
Product ID: 370CTIGTIG welding gloves with heat protection that balances flexibility and durability
Our Endura® 370CTIG TIG welding gloves are made from goatskin leather to provide an ideal balance between durability and hand motion that protect against sparks and heat. They provide ANSI 2 heat resistance and feature ParaActiv™ thread for added seam integrity and durability. Extended gauntlet cuffs provide extra wrist protection against heat and sparks.
-
Endura® 365HBR
Product ID: 365HBRHighly dexterous, durable TIG welding gloves that resist heat up to 140°C / 284°F
Built extra-tough from cowhide and featuring 4″ cowhide gauntlets that protect the wrists, these welding gloves provide a high level of protection while remaining highly flexible for precise work. They provide heat resistance in temperatures up to 140°C / 284°F. Sewing thread is made with Kevlar® fiber for added seam integrity that increases resistance to sparks and long lasting wear.
-
Endura® 335DTIG
Product ID: 335DTigEnhanced dexterity and sense of touch for precise TIG welding
The fineness and flexibility of deerskin provides an enhanced sense of touch and optimal dexterity, which makes these gloves a perfect match for the most precise welding jobs. 4″ gauntlet cuffs and heat protection of up to 140°C / 284°F also ensures adherence to the highest safety standards. Sewing thread is made with Kevlar® fiber for added seam integrity. Equipped with strapped thumbs, these are durable, long-lasting gloves you can count on.
-
Superior® N10F
Product ID: N10FKeep it clean with lint-free nylon inspector glove
Meeting the needs of assembly line, cleanrooms, food handling and other industries, these lint-free, form-fitting gloves are designed for clean applications.
-
TenActiv™ STAGYPNVB
Product ID: STAGYPNVBHigh-visibility impact resistance and cut protection with an excellent grip
These 13-gauge TenActiv™ gloves offer ANSI Level A5 cut protection which is matched with impact-resistant back of hand protection and a hi-viz knit shell. Their micropore nitrile coating displaces oil which guarantees a steady grip on slick or slippery surfaces, making them an excellent choice in heavy construction and oil & gas industries.
-
Emerald CX® SKWCPLP
Product ID: SKWCPLPHeat protection knit with cut resistance and leather palms for comfort and durability when handling hot material
Our Emerald CX® SKWCPLP string knit gloves feature leather palms and protect hands from heat and cut hazards. ParaActiv™ engineered yarn material provides 360° cut protection with ANSI A5 cut resistance and ANSI 3 heat protection. Leather palms offer improved durability and comfort, making them ideal for handling heavy metal parts and other hot objects.
-
Cool Grip® SKPX/PSS
Product ID: SKPX/PSS360° cut protection matched with superior flame and spark resistance
Made from a blend of DuPont™ Kevlar® fiber and Protex® yarns that provide 360° ANSI Level A4 cut protection and ANSI Level 5 heat resistance, these 7-gauge double-layer gloves are a perfect match for any job that presents cut hazards in high heat. Silicone strips at the palm increase their grip and heat resistance, and inner gloves made from high-bulk polyester give them a soft, comfortable fit.
-
TenActiv™ SBTAKLP
Product ID: SBTAKLPTop level 360° cut resistance meets reinforced durability
A thin line construction provides these 10-gauge cut-resistant gloves with a high level of dexterity. Their steel reinforced TenActiv™ yarn provides 360° ANSI Level A9 cut protection, while premium side split leather palms increase their abrasion resistance. Sewn with ParaActiv™ thread for added seam integrity. Leather reinforcement at the thumb crotch greatly increases the gloves’ lifespan.
-
Emerald CX® S13KBGLP
Product ID: S13KBGLPTear-resistant gloves built to be as tough as the materials they handle
Tear-resistant goat-grain palms, reinforced thumb-crotches and DuPont™ Kevlar® fiber make these tough gloves ideal for handling metals. They provide 360° ANSI Level A5 cut protection and ANSI Level 4 puncture resistance and feature snug wrists for a secure fit. They’re also highly flexible and dexterous.
-
Endura® 398KGLBG
Product ID: 398KGLBGExtended gauntlet MIG welding gloves that stand up to heat, cuts and punctures
These highly dexterous MIG welding gloves don’t skimp on comfort or protection. They feature tough cowgrain palms and suede leather backs and cuffs. They’re complete with cushioned wrists and 6″ gauntlet cuffs for greater coverage. Their back-of-hand fleece lining ensures ANSI Level 2 heat resistance, and a DuPont™ Kevlar® fiber lining provides 360° ANSI Level A4 cut resistance and ANSI Level 4 puncture resistance.