This cut icon is followed by the 360 cut icon with special spacing
-
TenActiv™ S18TAFGFNF
Product ID: S18TAFGFNFUltra-thin cut resistance with palm coating that covers fingers and knuckles for better water protection
Our versatile TenActiv™ S18TAFGFNF gloves are ultra-thin with an extended foam nitrile coating that covers fingers up to the knuckles for additional protection in wet conditions. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance while the 3/4 foam nitrile coating offers steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel.
-
Endura® 365DLX6KG
Product ID: 365DLX6KGCut-resistant lineman gloves with extended hi-viz cuffs for visibility
Our Endura® 365DLX6 lineman gloves protect hands from cuts and feature a hi-viz 6-inch cuff for better visibility. Made from durable horse leather, they feature a double-leather palm patches in high-wear areas and a ParaActiv™ engineered yarn liner that offers 360° cut protection with moderate ANSI A4 cut resistance. These gloves are treated to repel water, liquids, and stains.
-
Endura® 361DLXTKG
Product ID: 361DLXTKGCut-resistant extended cuff lineman mitts that keep hands warm down to -15°C / 5°F
Our Endura® 361DLXTKG lineman mitts are cut resistant and designed to keep hands warm in temperatures down to -15°C / 5°F. The combination of a claw design along with a Thinsulate™ liner provides warmth and comfort in frigid temperatures. Made with a ParaActiv™ engineered yarn liner for 360° cut protection with ANSI A4 cut resistance, they’re treated to resist water and liquids plus feature extended cuffs with hi-viz bands for better visibility.
-
Endura® 399GKGTL5
Product ID: 399GKGTL5Moderate cut protection with extended gauntlet cuffs and protection from cold down to -20°C / -4°F
Our Endura® 399GKGTL5 gloves feature a ParaActiv™ liner that provides 360° cut protection with ANSI A4 cut resistance. They keep hands warm in temperatures down to -20°C / -4°F, and their 6″ gauntlet cuffs provide additional protection to wrists and forearms. Designed to conform to hands for a closer fit and more dexterity.
-
Contender™ TOCKVLO
Product ID: TOCKVLOHeat protection gloves with grip in orange knit for better visibility
Our Contender™ TOCKVLO orange knit gloves help increase hand placement visibility while providing 360° cut protection with moderate ANSI A4 cut resistance and ANSI 4 heat protection. The loop out design and longer knit-wrist cuffs ensure comfort during material handling, and the cotton-blend fabric absorbs grease and oil for a secure grip.
-
Endura® 399GKGL5L
Product ID: 399GKGL5LAll-round fabrication and MIG welding glove with arc flash protection designed for women’s hands
Our Endura® 399GKGL5L MIG welding gloves are ideal for MIG welding and all-round fabrication use and designed for women’s hands for a more secure and comfortable fit. ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance and ANSI 3 heat protection. They are arc flash-rated level 3 with an ATPV of 36 cal / cm². Abrasion resistant goatskin leather and durable keystone thumbs optimize these MIG welding gloves for the long haul, while 6-inch gauntlet cuffs provide extra coverage where heat hazard exists.
-
Endura® 398KGLBGL
Product ID: 398KGLBGLMIG welding gloves designed for women's hands for better fit and protection from material handling hazards
Our Endura® 398KGLBG MIG welding gloves are designed to protect against heat and cuts and are fitted for women’s hands. ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance while back-of-hand fleece lining offers ANSI 2 heat protection. Dark coloring hides dirt and stains for a longer wear life plus extended 6-inch cuffs offer added wrist and forearm protection. Padded palm patches offer further comfort when material handling.
-
Endura® 365DLX2TKG
Product ID: 365DLX2TKGCold-rated lineman gloves with cut protection and 2-inch hi-viz cuffs
Our Endura® 365DLX2TKG lineman gloves feature cut resistance and cold protection. ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A4 cut resistance and 2-inch cuffs with hi-viz retroreflective bands provide better visibility. They are also Thinsulate™-lined for cold protection in temperatures down to -15°C / 5°F.
-
Endura® 505ALB
Product ID: 505ALBAluminized gloves for radiant heat and spark protection during long sessions of stick welding
Our Endura® 505ALB welding gloves feature back-of-hand aluminized layer for long sessions of stick welding or other tasks that require radiant heat protection against molten materials. Sewn with ParaActiv™ fiber for added seam integrity, the back-of-hand is treated with an aluminum layer to reflect away radiant heat, ultraviolet light, molten metal, sparks, and slag. ParaActiv™ engineered yarn liner provides 360° cut protection with moderate ANSI A4 cut resistance and ANSI 3 heat protection.
-
Endura® 399OBGKG5
Product ID: 399OBGKG5Extended gauntlet metal fabrication driver gloves with water and oil resistance
Our Endura® 399OBGKG5 drivers gloves use durable goatskin treated with Oilbloc™ to resist oil and water. An all-round metal fabrication shop glove, it features wing thumbs to provide extra durability while 6″ gauntlet cuffs ensure added arm protection. The lining is cut-and-sewn for a comfortable fit that won’t bunch and is made with DuPont™ Kevlar® fiber for 360° cut protection with ANSI Level A4 cut resistance.
-
Clutch Gear® MXPG
Product ID: MXPGSlim, flexible mechanic gloves with moderate cut protection
Thanks to a laminated spandex backing and leather palms, our slim profile Clutch Gear® MXPG mechanic gloves combine durability with improved hand movement and feeling. Leather wraps around the thumb and forefinger to reduce wear in traditional high stress wear areas while wide elastic straps with hook and loop closures allow for a fit that’s snug yet comfortable.
Note: Sizes 3XL & 4XL are made to order
-
Contender™ TCKVLO
Product ID: TCKVLOHeat and cut resistant with long knit cuffs for added safety plus secure oil grip
Our Contender™ TCKVLO gloves protect against heat and cut hazards and feature longer knit cuffs for added protection. ParaActiv™ engineered yarn material provides 360° cut protection with moderate ANSI A4 cut resistance and ANSI 4 heat protection. Knit cuffs provide comfort and extra wrist safety, while the cotton woven into the fabric helps absorb grease and oil for a firm, secure grip.
-
Endura® 378GOBKVB
Product ID: 378GOBKVBArc flash-rated multi-hazard protection with unpadded palms for a wider range of movement plus liquid resistance
Our Endura® 378GOBKVB gloves offer protection against arc flash, cuts, and impact hazards without impeding dexterity. Arc flash-rated level 3 with an ATPV of 34 cal / cm², their ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance. Back-of-hand ANSI 2 impact resistance offers protection against knocks and bumps when working in tight spaces. Treated to resist water and liquids plus unpadded palms for steady grip and a better sense of feel when performing tasks.
-
TenActiv™ STAGFNP
Product ID: STAGFNPLightweight, strong grip gloves that guard against cuts and punctures
A 13-gauge TenActiv™ shell provides these lightweight gloves with ANSI Level 4 abrasion resistance and 360° ANSI Level A4 cut protection without impeding dexterity or mobility. Leather palm patches placed at the palm and thumb crotch reinforce critical wear areas boost puncture resistance to ANSI Level 5. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions while providing ANSI Level 3 palm puncture resistance.
-
Contender™ KBKB1T
Product ID: KBKB1THeat-resistant sleeves with cut protection made with material that resists sparks and melting
Our cut-resistant Contender™ KBKB1T FR sleeves offer heat protection and are made with material designed to resist flame. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance, ANSI 2 heat resistance, and passes the ASTM D6413 vertical flame resistance test for protection against sparks and slag. Tapered sleeves with elasticized biceps and thumbholes secure sleeves and ensure a snug fit.
-
Contender™ KGC1T
Product ID: KGC1THeat and cut-resistant dark green sleeves that hide dirt for longer wear life
Our Contender™ KGC1T tapered sleeves protect against heat and cut hazards with dark green color to hide dirt for a longer wear life. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance and ANSI 2 heat protection. Elastic grip at bicep and tapered fit secure the sleeve in place.
-
Contender™ KG/CE22TH
Product ID: KG/CE22THDouble-layered incidental cut and heat arm protection for material handling
Our Contender™ KG/CE22TH sleeves protect arms from incidental cut and heat when material handling. A double layer construction safeguards against sharp edges and the cotton-blend adds comfort for all day wear. The silicone-free construction makes these sleeves ideal for handling surfaces prior to painting and the ParaActiv™ engineered yarn liner provides incidental ANSI A4 cut resistance and ANSI 2 heat protection.
-
Contender™ KFG
Product ID: KFGCut-resistant sleeves made with material known to resist sparks and melting
Our Contender™ KFG sleeves protect against cut hazards and are made with material known to resist sparks and melting. Made with ParaActiv™ engineered yarn, they provide 360° cut resistance with moderate ANSI A4 cut protection that helps prevent the material from melting. Elastic grip and tapered fit secures the sleeve in place.
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNWaterproof cut-resistant gloves that keep hands warm down to -10°C / 14°F
This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ knit assures ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ S18WTFN
Product ID: S18WTFNWater and wind protection with laminated anti-slip layers for better grip plus cut resistance
Our waterproof and windproof TenActiv™ S18WTLFN gloves protect skin from harsh environments while remaining breathable. The unique membrane lamination prevents layers from slipping, providing a comfortable fit and reliable grip. TenActiv™ engineered yarn material provides 360° cut protection with ANSI A4 cut resistance plus the foam nitrile palm coating offers a steady wet grip.
-
Endura® 378KGVB
Product ID: 378KGVBMedium-duty impact-resistant leather gloves with 360° cut protection
These medium-duty impact-resistant gloves feature a lining made with DuPont™ Kevlar® fiber, adding 360° cut resistance with ANSI Level A4 cut protection inside their durable leather shell. In addition, their non-padded palms provide more dexterity and tactility for everyday work where vibration hazards are not a concern.
-
TenActiv™ STAGBPU
Product ID: STAGBPUBlack knit cut-resistant gloves that hide dirt and stains for longer wear life
Our TenActiv™ STAGBPU gloves are made from dark colored TenActiv™ engineered yarn to hide dirt and stains while protecting worker hands from cut hazards. The low-linting dark coloring allows these gloves to be used longer between laundering cycles, increasing their wear-life. They are ideal for work in unfinished or grimy environments where dirt is visible. Featuring moderate 360° cut protection with ANSI A4 cut resistance and polyurethane dipped palms for dry grip, they balance protection and comfort with a bare hand feel and dexterity.
-
Cool Grip® SPGC/A
Product ID: SPGC/AInsulated maximum heat protection with cut resistance for plastic injection molding
Our Cool Grip® SPGC/A insulated gloves offer cut resistance and heat protection for plastic injection molding. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance and ANSI 4 heat protection . An acrylic liner adds comfort while the glove-within-a-glove design traps air and provides reliable insulation.
-
TenActiv™ S18TAGOFN
Product ID: S18TAGOFNSilicone-free low-linting hi-viz orange gloves with cut protection for hand placement and worker visibility
Our hi-viz orange TenActiv™ S18TAGGFN gloves are silicone and low-linting, offering cut protection plus worker visibility and hand placement. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance. Their foam nitrile palms are non-marring and offer a steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel. They also feature a hi-viz orange shell for better hand visibility.
