- View cart You cannot add another "TenActiv™ S18WTLFN" to your cart.
-
Endura® 399GKGL5L
Product ID: 399GKGL5LMIG welding gloves designed for a woman’s hands
Abrasion resistant goatskin leather and durable keystone thumbs optimize these MIG welding gloves for the long haul, while 6″ gauntlet cuffs provide extra coverage when heat is a hazard. A cut-and-sewn construction gives these gloves a close, dexterous fit, and their lining made with blended aramid provides 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. Testing places these gloves at an arc flash level 3 rating, and ANSI level 3 heat rating.
-
Sure Knit™ S10SXBDB
Product ID: S10SXBDBFood processing gloves with extreme cut resistance and safety patches for deboning and meat processing
Our Sure Knit™ S10SXBDB food processing gloves provide extreme cut resistance for deboning and safe meat processing. TenActiv™ engineered yarn provides 360° cut protection with extreme ANSI A8 cut resistance, plus puncture-resistant patches on the sides for added protection when deboning. They are CFIA and FDA compliant for safe food handling with touchscreen compatibility to seamlessly move between tasks. Light blue color helps with easy contamination detection.
-
Chemstop™ F236
Product ID: F236Double-dipped chemical protection with textured finish for longer wear life and better grip
Our Chemstop™ F236 chemical-resistant gloves feature a textured finish for better grip and are designed for longer wear life. Double-dipped PVC coating provides better durability against wear and tear and guards against chemicals and solvents. These gloves feature an anti-slip textured finish that ensures grip on wet surfaces and are CFIA-compliant for safe food handling.
-
Chemstop™ NE3030
Product ID: NE3030Flock Lined Chemical Resistant Neoprene Gloves
We built our Chemstop™ NE3030 gloves for workers in refineries, mines, or any other job that needs protection against chemicals and heat. Our neoprene gloves are naturally flame and heat resistant and will protect against a wide range of chemicals, acid, caustics, and alcohols. Puncture and abrasion resistance provide tough protection against rough materials.
-
Dexterity® S18KGDNE
Product ID: S18KGDNEArc flash protection with touchscreen compatibility plus additional wrist cut protection to guard against sharp edges
Our arc flash-rated Dexterity® S18KGDNE gloves offer protection against cut hazards and unfinished edges and are touchscreen friendly to seamlessly move between tasks. Arc flash-rated level 3 with an ATPV of 25 cal / cm², they’re made from electrostatic dissipative ParaActiv™ engineered yarn to protect microelectronics and provide 360° cut protection with ANSI A3 cut resistance. Additionally, the cuffs offer ANSI A6 cut protection for protection against sharp edges found in electrical boxes. These gloves also feature a neoprene palm coating material that is known to resist flame for steady grip.
-
Sure Knit™ CSTN120HF
Product ID: CSTN120HFCleanroom-processed fingerless inspector gloves
Thanks to an open-finger design, our cleanroom processed Sure Knit® CSTN120HF gloves provide the freedom to use bare fingertips for fine assembly, while still providing protection from contaminants. The finger opening hems are specially sealed to protect against lint and loose fibers. Alternatively, they can be worn as a glove liner under vinyl, latex, or nitrile disposable glove.
-
Superior Touch® CS13PUCF
Product ID: CS13PUCFCleanroom-processed lint-free gloves that stop static
Our Superior Touch® CS13PUCF work gloves are designed to protect sensitive electronics. Cleanroom-processed and anti-static yarn makes the glove resistant to electric current to keep your load capacitors, chips, and processors safe. The polyurethane palm coating provides great grip and dexterity.
-
Dexterity® S15GPNVB
Product ID: S15GPNVBThin gloves with cut and impact protection plus micropore nitrile palm coating for steady wet grip
Our Dexterity® S15GPNVB gloves offer cut resistance and impact protection plus a micropore nitrile palm coating for better wet grip. They provide 360° of cut protection with ANSI level 5 cut resistance plus back-of-hand ANSI 2 impact protection against knocks and bumps. Micropore nitrile palm coating offers a steady wet grip and helps prevent water from seeping in.
-
Contender™ KBKB1T
Product ID: KBKB1TFlame-retardant, cut-resistant sleeves optimized for welding work
Made from a blend of stain-hiding black DuPont™ Kevlar® fiber and modacrylic, these sleeves offer ANSI Level A4 cut protection while resisting flames, making them an excellent choice for welding work. They’re fully washable for easy refresh and include elasticized armbands to ensure sleeves stay put during long work hours.
-
Contender™ KFGCM
Product ID: KFGCMCut protecting sleeves that keep arms cool in warm working conditions
These sleeves combine ANSI Level A6 cut protection with unbeatable comfort for working in hot conditions. The aramid blended fiber is lined with moisture-wicking Coolmax® to keep arms dry and cool throughout the day. Elasticized armbands made with STAYz-UP™ technology eliminate any sliding or slipping, guaranteeing a snug, reliable fit. A choice of two sleeve styles: a regular tubular knit or a tapered knit, provides greater versatility.
-
Sure Knit™ SLSXB
Product ID: SLSXBFully washable, antimicrobial sleeves with extreme cut protection
Ideal for food processing tasks that involve a high risk of lacerations, these fully washable sleeves provide ANSI Level A8 cut protection. Treated with an active agent to achieve 99.9% antimicrobial status, they can be safely laundered in temperatures up to 85°C / 185°F. An attachable clip at the bicep prevents slippage, while a latex-free construction reduces the risk of allergic reactions. At 21 inches in length, these sleeves provide maximum coverage. They are also FDA and CFIA-compliant.
-
Contender™ KFG
Product ID: KFGCut resistant sleeves with a snug, reliable fit
Aramid-encased, composite filament fiber yarn provides ANSI Level A4 cut protection. These sleeves are approved for 4.5 seconds of incidental heat contact up to 315°C / 600°F. Elasticized armbands made with STAYz-UP™ technology eliminate any sliding or slipping of the sleeves, guaranteeing a snug, reliable fit.
Available in a tubular or tapered fit, with or without thumbholes, in a variety of sizes that range from 10″ to 22″
-
Contender™ KAW1C10
Product ID: KAW1C10Heat-resistant sleeves that guard against cuts
Knit from a single-layer para-aramid fiber that provides ANSI Level A2 cut protection, these tubular knit sleeves protect the entire length of the arm when working with metals. Their heat-resistant construction offers strong resistance to sparks, flames and heat, while a snug fit follows the natural contours of the arm to provide enhanced comfort.
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNWaterproof cut-resistant gloves that keep hands warm down to -10°C / 14°F
This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ knit assures ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
SnowForce™ 635CRYO
Product ID: 635CRYOWaterproof protection for handling extremely cold cryogens
Designed for use around cryogens, these waterproof gloves are insulated with 3M Thinsulate™ which allows them to withstand contact with dry ice for 267 seconds. RaoTex™ inserts prevent cryogens from soaking through to the skin and act as an added insulator, trapping body heat while allowing moisture to escape. An extended cuff increases the area of protection while a looser fit allows for easy removal in the event of contact with cryogens.
-
Cool Grip® SPGC/A
Product ID: SPGC/AInsulated maximum heat protection with cut resistance for plastic injection molding
Our Cool Grip® SPGC/A insulated gloves offer cut resistance and heat protection for plastic injection molding. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance and ANSI 4 heat protection . An acrylic liner adds comfort while the glove-within-a-glove design traps air and provides reliable insulation.
-
TenActiv™ S18TAGOFN
Product ID: S18TAGOFNSilicone-free low-linting hi-viz orange gloves with cut protection for hand placement and worker visibility
Our hi-viz orange TenActiv™ S18TAGGFN gloves are silicone and low-linting, offering cut protection plus worker visibility and hand placement. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance. Their foam nitrile palms are non-marring and offer a steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel. They also feature a hi-viz orange shell for better hand visibility.
-
TenActiv™ S18TAGGFN
Product ID: S18TAGGFNSilicone-free low-linting hi-viz green gloves with cut protection for hand placement and worker visibility
Our hi-viz green TenActiv™ S18TAGGFN gloves are silicone low-linting, offering cut protection plus worker visibility and hand placement. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance. Their foam nitrile palms are non-marring and offer a steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel. They also feature a hi-viz green shell for better hand placement and worker visibility.
-
TenActiv™ S18TAFGPU
Product ID: S18TAFGPUUltra-thin moderate cut protection for better hand movement with a bare hand feel and dry grip
Our TenActiv™ S18TAFGPU gloves protect against cut hazards and offer a bare hand feel with dry grip and outstanding dexterity. TenActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance, while their polyurethane palm coating offers steady dry grip and tactile feel. Ideal for small parts handling, their white shell helps spot dirt and contamination.
-
TenActiv™ S18TAFGNT
Product ID: S18TAFGNTCut resistant gloves with a barehand feel that repel oil, water and solvents
These 18-gauge gloves feature a stronger-than-steel continuous filament yarn that ensures ANSI Level A4 cut protection and a ZedCoat™ palm coating that delivers ANSI Level 4 abrasion resistance while also defending against oils, solvents and water. They offer a highly tactile, bare-hand feel, making them an excellent match for precise tasks that carry cut risks, such as glass handling.
-
TenActiv™ S18TAFGFN
Product ID: S18TAFGFNUltra-thin and versatile cut-resistant gloves for a wide range of tasks
Our versatile TenActiv™ S18TAFGFN gloves are ultra-thin and CFIA compliant with features for a wide range of operations. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance while their foam nitrile palms are non-marring and offer steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel.
-
Dexterity® S18KGFN
Product ID: S18KGFNStrong grip, cut-resistant, touchscreen compatible gloves
ANSI Level A3 cut protection, a grip-strengthening foam nitrile palm coating and a close, tactile feel allows these high-dexterity gloves to excel at handling small parts and completing precise tasks. They’re made with cut-resistant DuPont™ Kevlar® fiber and have been treated with an active agent to achieve a 99.9% antimicrobial status. They’re also touchscreen compatible for added convenience.
-
Dexterity® S15NT
Product ID: S15NTComfort and dexterity that protects against punctures and abrasion
These versatile gloves are proudly made in Canada from a cotton seamless knit shell that provides outstanding dexterity and comfort. A nitrile-dipped palm coating, which over time, forms to fit the user’s hand, offers ANSI Level 4 abrasion resistance and ANSI Level 2 puncture resistance. The nitrile palm coating features an additive to make them biodegradable.
-
TenActiv™ S13TANT
Product ID: S13TANTTouchscreen compatible gloves with high abrasion resistance
These touchscreen compatible TenActiv™ gloves feature a ZedCoat™ palm coating that provides ANSI Level 4 abrasion resistance. They’re made from a lint-free continuous filament yarn that’s stronger than steel and delivers both ANSI Level A4 cut protection and ANSI Level 5 puncture resistance. They’re snug-fitting and ergonomically shaped to ensure comfort, and have been treated with an active agent to achieve 99.9% antimicrobial status.