-
Superior Touch® S13SXPUQ
Product ID: S13SXPUQEconomical low-lint gloves for incidental cut protection and non-marring palms to prevent contamination
Our Superior Touch® S13SXPUQ low-linting gloves with non-marring palms are an economical choice for cut protection against incidental hazards. White Dyneema® material offers 360° cut protection with low ANSI A2 cut resistance and will show dirt or other contaminates. Low-linting with non-marring polyurethane palm coating provides better dry grip that will not leave residue, making them ideal for handling sensitive material like glass.
-
TenActiv™ S13TAFGPU
Product ID: S13TAFGPULow-linting cut resistance to prevent contamination plus steady dry grip and better touch sensitivity
Our low-linting TenActiv™ S13TAFGPU gloves offer cut resistance plus a steady grip with better sense of touch that prevents shedding to avoid contamination. TenActiv™ engineered yarn provides 360° cut protection with ANSI A3 cut resistance and a polyurethane palm dip coating provides steady dry grip and tactile feel.
-
Superior Touch® S13PUCF
Product ID: S13PUCFElectrostatic dissipative low-linting white gloves with non-marring palms for protecting microelectronics
Our electrostactic-dissipative Superior Touch® S13PUCF white polyester gloves are low-linting and non-marring to detect and prevent contamination when working with microelectronics. A non-marring polyurethane palm coating offers a better dry grip and tactile feel that will not leave a residue. Ideal for microelectronics, glassware, and small parts handling.
-
Dexterity® S13PNT
Product ID: S13PNTGeneral use gloves with incidental cut protection and steady wet grip
Our Dexterity® S13PNT general use gloves offer a steady wet grip and protect against incidental cut hazards. The polyester shell helps wick away moisture to keep hands dry and features 360° cut protection with ANSI A2 cut resistance. Micropore nitrile palm coating offers a steady wet grip, making them an ideal choice for handling small parts.
-
Dexterity® S13KGPN
Product ID: S13KGPNA superior grip combined with 360° cut protection
A micropore nitrile coating that creates tiny, suction cup-like craters on the palms gives these gloves an unsurpassed level of grip on wet and oily surfaces. Their DuPont™ Kevlar® fiber construction provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 2 puncture resistance. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas. These gloves are fully launderable, allowing them to be cleaned and refreshed with ease.
-
Dexterity® S13KFGFNT
Product ID: S13KFGFNT360° cut protection matched with a strong, steady grip
These 13-gauge knit gloves match outstanding dexterity with cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance. A foam nitrile coating at the palms provides a firm grip on lightly oiled surfaces. A reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
Dexterity® S13HVLX
Product ID: S13HVLXHi-viz general use gloves with strong dry grip for worker visibility and hand placement
Our Dexterity® S13HVLX gloves offer steady dry grip and feature hi-viz green shell for better visibility and hand placement. Made from a lightweight and breathable polyester knit, they wick away moisture to keep hands dry and their latex palm coating provides outstanding dry grip.
-
Superior Touch® S13GPU
Product ID: S13GPUFood-safe low-linting gloves with non-marring palms for food machine maintenance to prevent contamination
Our food-safe Superior Touch® S13GPU gloves are low-linting and non-marring to prevent contamination during food machine maintenance. A non-marring polyurethane palm coating offers better dry grip and tactile feel that will not leave a residue, making them ideal for glassware and small parts handling. They’re low-linting to prevent shedding and CFIA-compliant for safe food handling.
-
Superior Touch® S13GPPU
Product ID: S13GPPUHigh touch sensitive low-linting gloves with non-marring palms for small parts handling
Our Superior Touch® S13GPPU low-linting gloves feature non-marring palms that are ultra-thin for better sense of feel. Polyurethane palm dip coating provides steady dry grip and tactile feel, making them ideal for material and small parts handling.
-
Dexterity® S13FRNE
Product ID: S13FRNEArc flash-rated cut protection for better dexterity plus neoprene palm coating for grip
Our arc flash-rated Dexterity® S13FRNE gloves offer protection against cut hazards and unfinished edges. Arc flash-rated level 2 with an ATPV of 11 cal / cm², they’re made from ParaActiv™ engineered yarn to provide 360° cut protection with ANSI A4 cut resistance. These gloves also feature neoprene palm coating material that is known to resist flame for steady grip.
-
Dexterity® S13FNT
Product ID: S13FNTFlexible, nitrile-dipped work gloves with a strong grip
These nylon work gloves are made from a seamless-knit shell that’s both quick-drying and moisture wicking while providing ANSI Level 3 abrasion resistance and ANSI Level 2 puncture resistance. Foam nitrile at the palms provides a strong, steady grip, and the back-of-the-hand has been left uncoated for maximum comfort and flexibility.
-
Emerald CX® S13CXPNT
Product ID: S13CXPNTSilicon-free touchscreen compatible gloves with protection against cut and heat hazards plus wet grip
Our Emerald CX® S13CXPNT gloves are silicon-free, protect against cut and heat hazards, and are touchscreen compatible. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A6 cut resistance and ANSI 5 heat protection. Micropore nitrile palm coating offers a steady wet grip and helps prevent water from seeping in.
-
Contender™ TRFGK
Product ID: TRFGKHeat and cut protection for fabrication and handling hot unfinished metal
Our Contender™ TRFGK gloves protect hands when handling hot unfinished metal and performing fabrication tasks. The ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A5 cut resistance and ANSI 5 heat protection. The loop out design and longer knit-wrist cuffs ensure comfort during material handling, and the cotton-blend fabric absorbs grease and oil for steady grip.
-
Emerald CX® SWTACSL
Product ID: SWTACSLHeavy-gauge metal fabrication gloves with cut protection
Our Emerald CX® SWTACSL gloves provide cut resistance and are thick for comfort when handling metal. TenActiv™ engineered yarn liner provides 360° cut protection with ANSI A6 cut resistance. Cotton lining wicks away sweat for a more comfortable fit. Ideal for sheet metal and material handling.
-
Sure Knit™ STNCF
Product ID: STNCFLint-free with electrostatic dissipative properties to protect electronics from contaminates and static charges
Our lint-free Superior Touch® STNCF gloves prevents contamination and feature electrostatic dissipative properties that ground energy to protect sensitive electronics. Made with carbon filament, they prevent static charges from building up, making them ideal for working with electronics. Latex-free construction limits the risk of allergic reactions and touchscreen compatibility helps to seamlessly move between tasks.
-
TenActiv™ STAGXPU
Product ID: STAGXPUCut-resistant low-linting knit with non-marring dry grip to prevent contamination
Our TenActiv™ STAGXPU low-linting gloves feature a light color to show dirt, stains, or other particulate matter and a non-marring polyurethane dip palm coating that protect surfaces by preventing contamination. Ideal for glass handling or final assembly, they are made with TenActiv™ engineered yarn that provides 360° cut protection with ANSI A5 cut resistance and the polyurethane palm coating offers steady dry grip with a bare hand feel.
-
TenActiv™ STAGPN
Product ID: STAGPNCut resistant gloves with a strong and steady grip
These 13-gauge gloves feature a TenActiv™ composite filament fiber yarn that provides ANSI Level A5 cut protection, while a micropore nitrile coating ensures a steady grip even on wet or oily surfaces. They’re breathable and ergonomically shaped for a high degree of comfort and they further enhance safety by offering ANSI Level 4 abrasion resistance. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ STAGCXPU
Product ID: STAGCXPUMaximum cut protection with dry grip and sense of feel that hides dirt and stains for longer wear life
Our TenActiv™ STAGCXPU gloves offer maximum cut protection with outstanding dry grip. TenActiv™ engineered yarn material provides 360° cut protection with extreme ANSI A9 cut resistance. Polyurethane palm dip coating for steady dry grip and tactile feel. Dark green knit hides dirt and stains to increase wear life.
-
TenActiv™ STAFGPU
Product ID: STAFGPUDurable cut-resistant everyday gloves with non-marring palms for dry grip and sense of feel
Our TenActiv™ STAFGPU gloves offer cut resistance with polyurethane palm coating for a stronger dry grip and tactile feel. The TenActiv™ engineered yarn liner provides 360° cut protection with high ANSI A5 cut resistance while non-marring palms are ideal for assembly, glass, and material handling.
-
TenActiv™ STAFGFNT
Product ID: STAFGFNTTouchscreen compatible moderate cut protection with a steady wet grip
Our TenActiv™ STAFGFNT gloves provide moderate cut protection with touchscreen compatible steady wet grip. TenActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance. Foam nitrile palm coating offers steady wet grip and touchscreen compatibility to seamlessly move between tasks. Ideal for general use work.
-
TenActiv™ STACXPURT
Product ID: STACXPURTCut-resistant with maximum abrasion and reinforced thumb crotch for extra durability and dexterity when material handling
Our maximum abrasion TenActiv™ STACXPURT gloves with polyurethane palm coating and nitrile reinforced thumb crotch add extra durability and dexterity when material handling. The TenActiv™ engineered yarn liner provides 360° cut protection with high ANSI A6 cut resistance. Touchscreen compatible non-marring gloves are suitable when dealing with finished metal and glass material.
-
TenActiv™ STACXPNRT
Product ID: STACXPNRTExtreme cut protection with reinforced nitrile thumb crotch for material handling and longevity
These gloves are made with TenActiv™ engineered yarn that provides 360° cut protection with extreme ANSI A7 cut resistance while a nitrile reinforced thumb crotch protects against wear and tear when material handling. Their micropore nitrile palm coating offers steady wet grip and is touchscreen compatible for moving between tasks.
-
Superior Touch® SSXPU3OF
Product ID: SSXPU3OFOpen-finger gloves with incidental cut protection for bare hand feel, handling small parts, and touchscreen operation
Our Superior Touch® SSXPU3OF open-finger gloves protect hands from incidental cut hazards while allowing workers to operate touchscreens and handle small parts. TenActiv™ engineered yarn provides 360° cut protection with low ANSI A2 cut resistance. The polyurethane palm dip coating offers a steady dry grip, making them ideal for small parts handling and assembly tasks.
-
Sure Grip® SQD
Product ID: SQDKnit gloves made with biodegradable and recycled materials plus dotted PVC palms for strong grip
Our Sure Grip® SQD string knit shell is made with biodegradable and recycled materials, plus dotted palms for a strong grip that is breathable and dexterous. Their cotton / polyester blend provides cool and comfortable all-day wear. The PVC dot palm coating offers steady grip that is more breathable and flexible than full coverage palms. Ideal for use in material handling, warehousing, and low-hazard general tasks.