-
Superior® GSSTAP
Product ID: GSSTAPComfortable cut-resistant sweater for high-risk tasks
Our Superior® GSSTAP sweater provides cut resistance for the entire torso while remaining comfortable to wear. The collar and lower sleeves feature additional cut protection for neck and arms, safeguarding workers’ vulnerable areas from high-risk accidental injuries. Chest, abdomen, and upper arm areas protect against moderate cuts while the polyester back provides light cut protection, breathability, and helps reduce overall weight.
-
TenActiv™ STAGLXPB
Product ID: STAGLXPBMaximum cut and puncture protection
Our STAGLXPB gloves are designed to meet the hand protection requirements of the materials recovery and recycling industries, delivering maximum cut protection – rating ANSI Level A9 cut resistance on the palm and ANSI Level A5 cut resistance on the back of hand. They also offer ultimate puncture resistance – ANSI Level 5 hypodermic puncture resistance – thanks to a latex palm coating and a layer of Punkban™ lining the palm.
-
Chemstop™ S15KGVNVIB
Product ID: S15KGVNVIBHigh-performing vibration dampening with well rounded mechanical protection and dexterity
Our new S15KGVNVIB gloves are designed specifically for workers who face vibration hazards from use of heavy power tools. With 17 individual vibration dampening pads strategically placed in high-risk areas, these gloves offer protection where it’s needed most while maintaining a high level of comfort and dexterity. These gloves also provide 360° ANSI Level A5 cut protection and feature a two-layer palm dip for increased durability and a water-tight seal.
-
Contender™ KFGCM
Product ID: KFGCMCut protecting sleeves that keep arms cool in warm working conditions
These sleeves combine ANSI Level A6 cut protection with unbeatable comfort for working in hot conditions. The aramid blended fiber is lined with moisture-wicking Coolmax® to keep arms dry and cool throughout the day. Elasticized armbands made with STAYz-UP™ technology eliminate any sliding or slipping, guaranteeing a snug, reliable fit. A choice of two sleeve styles: a regular tubular knit or a tapered knit, provides greater versatility.
-
Contender™ KG/CE22TH
Product ID: KG/CE22THDouble-layered incidental cut and heat arm protection for material handling
Our Contender™ KG/CE22TH sleeves protect arms from incidental cut and heat when material handling. A double layer construction safeguards against sharp edges and the cotton-blend adds comfort for all day wear. The silicone-free construction makes these sleeves ideal for handling surfaces prior to painting and the ParaActiv™ engineered yarn liner provides incidental ANSI A4 cut resistance and ANSI 2 heat protection.
-
Contender™ KFG
Product ID: KFGCut resistant sleeves with a snug, reliable fit
Aramid-encased, composite filament fiber yarn provides ANSI Level A4 cut protection. These sleeves are approved for 4.5 seconds of incidental heat contact up to 315°C / 600°F. Elasticized armbands made with STAYz-UP™ technology eliminate any sliding or slipping of the sleeves, guaranteeing a snug, reliable fit.
-
Contender™ KBKB1T
Product ID: KBKB1TFlame-retardant, cut-resistant sleeves optimized for welding work
Made from a blend of stain-hiding black DuPont™ Kevlar® fiber and modacrylic, these sleeves offer ANSI Level A4 cut protection while resisting flames, making them an excellent choice for welding work. They’re fully washable for easy refresh and include elasticized armbands to ensure sleeves stay put during long work hours.
-
Contender™ KAW1C10
Product ID: KAW1C10Heat-resistant sleeves that guard against cuts
Knit from a single-layer para-aramid fiber that provides ANSI Level A2 cut protection, these tubular knit sleeves protect the entire length of the arm when working with metals. Their heat-resistant construction offers strong resistance to sparks, flames and heat, while a snug fit follows the natural contours of the arm to provide enhanced comfort.
-
Contender™ KAWC
Product ID: KAWCCut-resistant sleeves that guard against sparks, flames, and heat
Knit from a double-layer para-aramid fiber that provides ANSI Level A3 cut protection, these tubular knit sleeves protect the entire length of the arm when working with metals. Their heat-resistant construction guards against sparks, flames and heat, while a snug fit follows the natural contours of the arm to provide enhanced comfort.
-
SUPERA™ FR WCKVFR
Product ID: WCKVFRFire-resistant watch cap that is ultra soft and non-irritating for all-day comfort
This fire-resistant (FR) cap is designed for maximum comfort and all-day wear with a two-layer Kermel®-viscose blend that is non-irritating and feels soft against the skin. Even better, the beanie is made of a fabric with inherent FR properties that won’t diminish with laundering, allowing for easy refresh between uses. It’s an excellent choice for construction, mining, utility work, and jobs that involve oil and gas. It’s both NFPA 70E compliant and CAT2; Ebt 16 cal/cm².
-
SUPERA™ FR NWKVFR
Product ID: NWKVFRFire-resistant neck gaiter that is ultra soft and non-irritating for all-day comfort
This fire-resistant (FR) neck gaiter is designed for maximum comfort and all-day wear with a two-layer Kermel®-viscose blend that is non-irritating and feels soft against the skin. Even better, the fabric’s inherent FR properties won’t diminish with laundering, allowing for easy refresh between uses. It’s an excellent choice for construction, mining, utility work, and jobs that involve oil and gas. It’s both NFPA 70E compliant and CAT2; Ebt 16 cal/cm².
-
SUPERA™ FR BAKVFR
Product ID: BAKVFRNon-irritating fire-resistant balaclava for reliable protection against fire hazards
Our SUPERA™ BAKVFR is a balaclava made with double layer Kermel®- viscose blend, protecting against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and ANSI CAT2; Ebt 16 cal/cm² rating, this balaclava is suitable for workers in industries where fire hazards exist such as construction, mining, and oil and gas.
-
Cool Grip® SPGC/A
Product ID: SPGC/AInsulated, heat resistant gloves with 360° cut protection
Designed for use in rubber and plastics manufacturing, these gloves are made from a blend of composite filament fiber, polyester, and Cordura nylon that provides ANSI Level 5 heat resistance and 360° ANSI Level A4 cut protection. They also featuring outstanding dexterity, and benefit from a glove-within-a-glove design that increases insulation.
-
Dexterity® S18KGFN
Product ID: S18KGFNStrong grip, cut-resistant, touchscreen compatible gloves
ANSI Level A3 cut protection, a grip-strengthening foam nitrile palm coating and a close, tactile feel allows these high-dexterity gloves to excel at handling small parts and completing precise tasks. They’re made with cut-resistant DuPont™ Kevlar® fiber and have been treated with an active agent to achieve a 99.9% antimicrobial status. They’re also touchscreen compatible for added convenience.
-
Chemstop™ S15KGV30N
Product ID: S15KGV30NChemical gloves with cut protection and nitrile coating for better wet grip
Our Chemstop™ S15KGV30N gloves offer reliable protection from cut hazards and chemical exposure. Red PVC coating guards against chemicals and solvents while a black nitrile full hand coating resists oil, ensuring a steady wet grip. ParaActiv™ engineered yarn liner that provides 360° cut protection with high ANSI A5 cut resistance and ANSI 2 heat protection.
-
Dexterity® S13KGPN
Product ID: S13KGPNA superior grip combined with 360° cut protection
A micropore nitrile coating that creates tiny, suction cup-like craters on the palms gives these gloves an unsurpassed level of grip on wet and oily surfaces. Their DuPont™ Kevlar® fiber construction provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 2 puncture resistance. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas. These gloves are fully launderable, allowing them to be cleaned and refreshed with ease.
-
Dexterity® S13KFGPU
Product ID: S13KFGPUCut resistant gloves with a bare-hand feel and strong, steady grip
A flexible, fine gauge knit that offers ANSI Level A4 cut protection makes these non-marring gloves ideal for handling glass. They also feature ANSI Level 4 abrasion resistance and ANSI Level 2 puncture resistance. Polyurethane-coated palms combine a strong, steady grip with a bare-hand feel. The gloves are ergonomically shaped for a close and comfortable fit.
-
Dexterity® S13KFGFNT
Product ID: S13KFGFNT360° cut protection matched with a strong, steady grip
These 13-gauge knit gloves match outstanding dexterity with cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance. A foam nitrile coating at the palms provides a firm grip on lightly oiled surfaces. A reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
Dexterity® S13FRNE
Product ID: S13FRNEArc Flash tested gloves that guard against flames and cuts
An engineered yarn that blends DuPont™ Kevlar® fiber with flame-resistant fibers gives these gloves an Arc Flash testing level of 2, as well as ANSI Level 3 abrasion resistance, 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. Their knit shell construction ensures that the hands still enjoy a wide range of movement and neoprene-coated palms provide a strong, steady grip even in wet or oily conditions. Treated with an active agent to achieve a 99.9% antimicrobial status.
-
Contender™ TRFGK
Product ID: TRFGKHeat and cut protection for fabrication and handling hot unfinished metal
Our Contender™ TRFGK gloves protect hands when handling hot unfinished metal and performing fabrication tasks. The ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A5 cut resistance and ANSI 5 heat protection. The loop out design and longer knit-wrist cuffs ensure comfort during material handling, and the cotton-blend fabric absorbs grease and oil for steady grip.
-
Contender™ SPGRK4
Product ID: SPGRK4Dexterous, durable 360° cut protection
These gloves are made from a comfortable, high-dexterity seamless string knit and feature a 7-gauge filament fiber wrapped in aramid for 360° ANSI Level A6 cut protection. A unique spinning process ensures the cut resistance is applied to the entire surface area, and a latex-free composite prevents allergic reactions.
-
Cool Grip® SPGRK/A
Product ID: SPGRK/AProtection for handling moderately hot rubber and plastic
Our Cool Grip® SPGRK/A gloves keep workers’ hands protected while handling moderately hot material during rubber and plastic manufacturing. An acrylic liner adds comfort while the loop-in design prevents snagging on rough edges. These gloves feature a ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A6 cut resistance and ANSI 4 heat protection.
-
Contender™ SPGC2D
Product ID: SPGC2D360° cut protection combined with a strong, steady grip
Made from advanced composite yarns that provide 360° ANSI Level A4 cut protection, these 7-gauge knit gloves are created through a unique spinning process that ensures consistent cut and abrasion resistance across the entire glove surface area. They also feature PVC dotting on the front and back for a tighter, steadier grip. Thanks to their seamless string knit, hands enjoy high levels of comfort and dexterity.
-
Contender™ SPGC
Product ID: SPGC360° cut protection matched with comfort and dexterity
Made from advanced composite yarns that provide 360° ANSI Level A4 cut protection, these 7-gauge knit gloves are created through a unique spinning process that ensures consistent cut and abrasion resistance across the glove’s full surface area. Thanks to their seamless string knit, hands enjoy high levels of comfort and dexterity.
Superior Glove™, a leading Manufacturer & Wholesale Supplier of Work & Safety Gloves & Arm Sleeves. FREE SAMPLES. Wide Variety of Styles & Materials.
