-
Dexterity® S13KGPN
Product ID: S13KGPNA superior grip combined with 360° cut protection
A micropore nitrile coating that creates tiny, suction cup-like craters on the palms gives these gloves an unsurpassed level of grip on wet and oily surfaces. Their DuPont™ Kevlar® fiber construction provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 2 puncture resistance. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas. These gloves are fully launderable, allowing them to be cleaned and refreshed with ease.
-
Dexterity® S13KFGPU
Product ID: S13KFGPUNon-marring gloves with cut protection and better dry grip that won’t leave residue
Our Dexterity® S13KFGPU are non-marring gloves with fine knit that provide cut protection plus bare hand feel. ParaActiv™ engineered yarn material provides 360° cut protection with moderate ANSI A4 cut resistance. The non-marring polyurethane palm dip coating offers better dry grip that will not leave residue. Ergonomically shaped for close and snug fit ideal for glass handling tasks.
-
Dexterity® S13KFGFNT
Product ID: S13KFGFNT360° cut protection matched with a strong, steady grip
These 13-gauge knit gloves match outstanding dexterity with cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance. A foam nitrile coating at the palms provides a firm grip on lightly oiled surfaces. A reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
Dexterity® S13HVLX
Product ID: S13HVLXHi-viz general use gloves with strong dry grip for worker visibility and hand placement
Our Dexterity® S13HVLX gloves offer steady dry grip and feature hi-viz green shell for better visibility and hand placement. Made from a lightweight and breathable polyester knit, they wick away moisture to keep hands dry and their latex palm coating provides outstanding dry grip.
-
Superior Touch® S13GPU
Product ID: S13GPUFood-safe low-linting gloves with non-marring palms for food machine maintenance to prevent contamination
Our food-safe Superior Touch® S13GPU gloves are low-linting and non-marring to prevent contamination during food machine maintenance. A non-marring polyurethane palm coating offers better dry grip and tactile feel that will not leave a residue, making them ideal for glassware and small parts handling. Theyre low-linting to prevent shedding and CFIA-compliant for safe food handling.
-
Superior Touch® S13GPPU
Product ID: S13GPPUHigh touch sensitive low-linting gloves with non-marring palms for small parts handling
Our Superior Touch® S13GPPU low-linting gloves feature non-marring palms that are ultra-thin for better sense of feel. Polyurethane palm dip coating provides steady dry grip and tactile feel, making them ideal for material and small parts handling.
-
Dexterity® S13FRNE
Product ID: S13FRNEArc flash-rated cut protection for better dexterity plus neoprene palm coating for grip
Our arc flash-rated Dexterity® S13FRNE gloves offer protection against cut hazards and unfinished edges. Arc flash-rated level 2 with an ATPV of 11 cal / cm², theyre made from ParaActiv engineered yarn to provide 360° cut protection with ANSI A4 cut resistance. These gloves also feature neoprene palm coating material that is known to resist flame for steady grip.
-
Dexterity® S13FNT
Product ID: S13FNTFlexible, nitrile-dipped work gloves with a strong grip
These nylon work gloves are made from a seamless-knit shell that’s both quick-drying and moisture wicking while providing ANSI Level 3 abrasion resistance and ANSI Level 2 puncture resistance. Foam nitrile at the palms provides a strong, steady grip, and the back-of-the-hand has been left uncoated for maximum comfort and flexibility.
-
Emerald CX® S13CXPNT
Product ID: S13CXPNTSilicon-free touchscreen compatible gloves with protection against cut and heat hazards plus wet grip
Our Emerald CX® S13CXPNT gloves are silicon-free, protect against cut and heat hazards, and are touchscreen compatible. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A6 cut resistance and ANSI 5 heat protection. Micropore nitrile palm coating offers a steady wet grip and helps prevent water from seeping in.
-
Chemstop™ NT230
Product ID: NT230Chemical-resistant gloves with a ceramic powder finish for enhanced grip in wet and oily conditions
Our Chemstop NT230 chemical-resistant nitrile gloves feature a ceramic powder finish for outstanding grip in wet and oily conditions. Ideal for industries such as petrochemicals and automotive, these gloves are fully coated in nitrile to protect against oils, grease, and organic solvents. A crushed ceramic powder-textured hand coating finish provides outstanding wet grip.
-
North Sea™ NS300B
Product ID: NS300BChemical-resistant gloves that provide a strong grip in cold conditions
These chemically resistant gloves feature a PVC formulation that provides outstanding flexibility and ensures that they won’t stiffen or crack in cold temperatures. Rough-finished palms provide a sturdy grip even in wet, slippery conditions, and triple foam lining increases warmth. Safety cuffs and a shorter length allow for easy on and off.
-
North Sea™ NS330
Product ID: NS330Chemical-resistant gloves that keep hands safe in cold conditions
These chemically resistant gloves feature a PVC formulation that gives them outstanding flexibility and ensures that they won’t stiffen or crack in cold temperatures. Rough-finished palms provide a sturdy grip even in wet, slippery conditions. They’re also CFIA-compliant for safe food handling.
-
Chemstop™ NE246FFL
Product ID: NE246FFLHeat-resistant 18-inch extended-length chemical gloves for protection against caustics in maintenance tasks
Our Chemstop NE246FFL gloves are 18 inches long and offer protection against chemical and heat hazards. Theyre made from neoprene for protection against a wide range of chemicals, including acids, caustics, and oil. A fleece liner provides ANSI 3 heat resistance for protection from thermal contact, plus they offer 360° cut protection with ANSI A3 cut resistance. Extended-length gloves provide extra arm coverage plus diamond-grip textured palms offer steady grip.
-
Chemstop™ NE240TKL
Product ID: NE240TKLHeat-resistant 16-inch chemical gloves for protection against caustics in maintenance tasks
Our Chemstop NE240TKL gloves are 16 inches long and offer protection against chemical and heat hazards. Theyre made from neoprene for protection against a wide range of chemicals, including acids, caustics, and oil. A cotton liner provides ANSI 3 heat resistance for protection from thermal contact, plus they offer 360° cut protection with ANSI A3 cut resistance. Long-length gloves provide extra forearm coverage and diamond-grip textured palms offer steady grip.
-
North Sea™ N230FLK
Product ID: N230FLKFleece-lined fishing gloves that provide winter protection down to -15°C / 5°F
These gloves are ideal for winter fishing thanks to a nitrile coating that ensures flexibility even in extreme cold and a winter-fleece lining that keeps hands warm in temperatures down to -15°C / 5°F. They feature ANSI Level 6 abrasion resistance and ANSI Level 3 puncture resistance, as well as sand-patch grip panels that provide a secure hold on wet and oily surfaces. Knit wrist cuffs improve comfort and keep water out.
-
North Sea™ N230FL
Product ID: N230FLFishing gloves with extra wrist coverage that provide winter protection down to -15°C / 5°F
These gloves are ideal for winter fishing thanks to a nitrile coating that ensures flexibility even in extreme cold and a winter-fleece lining that keeps hands warm in temperatures down to -15°C / 5°F. They feature ANSI Level 6 abrasion resistance and ANSI Level 3 puncture resistance, along with sand-patch grip panels that provide a secure grip on wet and oily surfaces. Their cotton jersey support increases comfort by absorbing sweat while 11″ gauntlet cuffs keep wrists covered.
-
North Sea™ N230CR
Product ID: N230CROil resistant gloves that maintain a steady grip in cold conditions
Designed with commercial fishing in mind, these gloves feature a nitrile coating that resists oils and fuel and stays flexible even in extremely cold conditions. Their sand-patch grip channels ensure a steady grip on wet or oily surfaces, and cotton jersey support improves comfort while absorbing sweat. They feature ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance.
-
Chemstop™ L8230
Product ID: L8230Comfortable hi-viz latex gloves with crinkle palm finish for better grip
Our Chemstop L8230 latex gloves offer a comfortable feel with a crinkle palm finish for better grip. These hi-viz orange gloves feature an anti-slip rough palm finish that ensures grip on wet surfaces, plus a sweat-wicking cotton liner for comfort.
-
Contender™ TRFGK
Product ID: TRFGKHeat and cut protection for fabrication and handling hot unfinished metal
Our Contender™ TRFGK gloves protect hands when handling hot unfinished metal and performing fabrication tasks. The ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A5 cut resistance and ANSI 5 heat protection. The loop out design and longer knit-wrist cuffs ensure comfort during material handling, and the cotton-blend fabric absorbs grease and oil for steady grip.
-
Emerald CX® SWTACSL
Product ID: SWTACSLHeavy-gauge metal fabrication gloves with cut protection
Our Emerald CX® SWTACSL gloves provide cut resistance and are thick for comfort when handling metal. TenActiv™ engineered yarn liner provides 360° cut protection with ANSI A6 cut resistance. Cotton lining wicks away sweat for a more comfortable fit. Ideal for sheet metal and material handling.
-
Sure Knit™ STNCF
Product ID: STNCFLint-free with electrostatic dissipative properties to protect electronics from contaminates and static charges
Our lint-free Superior Touch® STNCF gloves prevents contamination and feature electrostatic dissipative properties that ground energy to protect sensitive electronics. Made with carbon filament, they prevent static charges from building up, making them ideal for working with electronics. Latex-free construction limits the risk of allergic reactions and touchscreen compatibility helps to seamlessly move between tasks.
-
Sure Knit™ STN120HF
Product ID: STN120HFOpen-finger inspector gloves that provide the highest level of touch sensitivity
Thanks to an open-finger design, these ambidextrous inspector gloves provide the highest level of touch sensitivity. They are made of 13 gauge, lint-free continuous filament nylon. A special process applied to the finger openings assures that there will be no loose fibers, and their cool, absorbent materials keeps hands comfortable. True Hand Technology (THT™) provides a superior fit, that will shape perfectly to your hand. They can be easily washed for a quick refresh.
-
TenActiv™ STAGXPU
Product ID: STAGXPUCut-resistant low-linting knit with non-marring dry grip to prevent contamination
Our TenActiv™ STAGXPU low-linting gloves feature a light color to show dirt, stains, or other particulate matter and a non-marring polyurethane dip palm coating that protect surfaces by preventing contamination. Ideal for glass handling or final assembly, they are made with TenActiv™ engineered yarn that provides 360° cut protection with ANSI A5 cut resistance and the polyurethane palm coating offers steady dry grip with a bare hand feel.
-
TenActiv™ STAGPN
Product ID: STAGPNCut resistant gloves with a strong and steady grip
These 13-gauge gloves feature a TenActiv™ composite filament fiber yarn that provides ANSI Level A5 cut protection, while a micropore nitrile coating ensures a steady grip even on wet or oily surfaces. They’re breathable and ergonomically shaped for a high degree of comfort and they further enhance safety by offering ANSI Level 4 abrasion resistance. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.