- View Sample Box Sorry! Right now we only allow a maximum of 3 products to be added to your sample box. If you'd like to add this product please go to your sample box and remove a product.
-
Dexterity® S18KGDNE
Product ID: S18KGDNEArc flash protection with touchscreen compatibility plus additional wrist cut protection to guard against sharp edges
Our arc flash-rated Dexterity® S18KGDNE gloves offer protection against cut hazards and unfinished edges and are touchscreen friendly to seamlessly move between tasks. Arc flash-rated level 3 with an ATPV of 25 cal / cm², they’re made from electrostatic dissipative ParaActiv™ engineered yarn to protect microelectronics and provide 360° cut protection with ANSI A3 cut resistance. Additionally, the cuffs offer ANSI A6 cut protection for protection against sharp edges found in electrical boxes. These gloves also feature a neoprene palm coating material that is known to resist flame for steady grip.
-
Sure Knit™ CSTN120HF
Product ID: CSTN120HFCleanroom-processed fingerless inspector gloves
Thanks to an open-finger design, our cleanroom processed Sure Knit® CSTN120HF gloves provide the freedom to use bare fingertips for fine assembly, while still providing protection from contaminants. The finger opening hems are specially sealed to protect against lint and loose fibers. Alternatively, they can be worn as a glove liner under vinyl, latex, or nitrile disposable glove.
-
TenActiv™ STAGBLPVB
Product ID: STAGBLPVBErgonomically shaped leather palms for more grip and dexterity than typical leather plus extreme cut resistance
Our TenActiv™ STAGBLPVB gloves feature ErgoHyde leather palms that provide improved hand movement and more grip than typical leather. TenActiv™ engineered yarn provides 360° cut protection with extreme ANSI A8 cut resistance, plus hi-viz back-of-hand bumpers offer improved hand placement visibility and ANSI 2 impact protection. Treated to resist water and liquids, their ErgoHyde palms offer an outstanding range of motion plus strong grip in wet conditions.
-
SnowForce™ 635CRYO
Product ID: 635CRYOWaterproof protection for handling extremely cold cryogens
Designed for use around cryogens, these waterproof gloves are insulated with 3M Thinsulate™ which allows them to withstand contact with dry ice for 267 seconds. RaoTex™ inserts prevent cryogens from soaking through to the skin and act as an added insulator, trapping body heat while allowing moisture to escape. An extended cuff increases the area of protection while a looser fit allows for easy removal in the event of contact with cryogens.
-
TenActiv™ S15TAFGPU
Product ID: S15TAFGPUCut resistant, versatile gloves with a strong grip and barehand feel
A high level of dexterity and ANSI Level A3 cut resistance optimizes these 15-gauge gloves for a wide variety of tasks. They’re made from a lint-free, continuous filament yarn and feature a polyurethane palm coating that provides a strong grip while allowing for a sensitive, bare-hand feel. Their ergonomic shaping, snug fit and breathable construction ensure all-day comfort.
-
Superior Touch® S13PU
Product ID: S13PUWhite nylon low-linting gloves for food machine maintenance with non-marring palms that shows dirt and contamination
Our food-safe Superior Touch® S13PU white nylon gloves are low-linting and non-marring to detect and prevent contamination during food machine maintenance. A non-marring polyurethane palm dip coating offers a better dry grip and tactile feel that will not leave a residue, making them ideal for glassware and small parts handling. They are also CFIA-compliant for safe food handling.
-
Dexterity® S13KFGPU
Product ID: S13KFGPUNon-marring gloves with cut protection and better dry grip that won’t leave residue
Our Dexterity® S13KFGPU are non-marring gloves with fine knit that provide cut protection plus bare hand feel. ParaActiv™ engineered yarn material provides 360° cut protection with moderate ANSI A4 cut resistance. The non-marring polyurethane palm dip coating offers better dry grip that will not leave residue. Ergonomically shaped for close and snug fit ideal for glass handling tasks.
-
Chemstop™ NE240TKL
Product ID: NE240TKLHeat-resistant 16-inch chemical gloves for protection against caustics in maintenance tasks
Our Chemstop™ NE240TKL gloves are 16 inches long and offer protection against chemical and heat hazards. They’re made from neoprene for protection against a wide range of chemicals, including acids, caustics, and oil. A cotton liner provides ANSI 3 heat resistance for protection from thermal contact, plus they offer 360° cut protection with ANSI A3 cut resistance. Long-length gloves provide extra forearm coverage and diamond-grip textured palms offer steady grip.
-
Sure Knit™ STN120HF
Product ID: STN120HFOpen-finger inspector gloves that provide the highest level of touch sensitivity
Thanks to an open-finger design, these ambidextrous inspector gloves provide the highest level of touch sensitivity. They are made of 13 gauge, lint-free continuous filament nylon. A special process applied to the finger openings assures that there will be no loose fibers, and their cool, absorbent materials keeps hands comfortable. True Hand Technology (THT™) provides a superior fit, that will shape perfectly to your hand. They can be easily washed for a quick refresh.
-
Sure Knit™ S13TP3K
Product ID: S13TP3KLow-linting inspector gloves for protection against incidental cut hazards
Our Sure Knit™ S13TP3K are low-linting inspector gloves that protect against minor cut hazards. Offering 360° cut protection with ANSI A2 cut resistance, these gloves are made with low-linting polyester knit that prevents contamination and makes them an ideal choice for assembly and paint line applications. They feature a snug fit to ensure lasting comfort and dexterity.
-
Emerald CX® S10NXFN
Product ID: S10NXFNBlack knit cut protection for longer wear life with touchscreen compatibility to seamlessly move between tasks
Our touchscreen compatible Emerald CX® S10NXFN gloves offer protection against cut hazards with black knit to hide stains and increase wear life. Engineered material provides high ANSI A6 cut resistance plus maximum ANSI A5 probe puncture protection. Foam nitrile palm coating offers a steady grip in wet or oily conditions and are touchscreen compatible to seamlessly move between tasks.
-
Clutch Gear® MXBE
Product ID: MXBEEconomic choice mechanic gloves with a high level of dexterity for light material handling
Our Clutch Gear® MXBE are an economic choice mechanic gloves with reinforced thumb crotch for light material handling and fourchette inserts to increase comfort and hand motion. They also feature hook and loop wrist closures for a snug fit and stretch-nylon backs that guard against bumps and scrapes.
-
Superior® MLNF
Product ID: MLNFLightweight, fully washable, lint-free painter's gloves
These painter’s gloves are made from a lint-free nylon that optimizes them for any application where dust or particles may pose a concern, or when surfaces must be protected from scratches, oils, and fingerprints. They’re lightweight, comfortable, and feature a slip-on fit for easy on and off. Fully launderable, they can be easily refreshed after messy jobs.
-
Ground Hog™ 14012GH
Product ID: 14012GHStatic grounding gloves that eliminates electrostatic paint spray-back while keeping hands protected
Our Ground Hog™ 14012GH cleanroom-processed gloves feature highly conductive continuous silver strips on palms that run from the inside of the glove to the outside to help ground workers and avoid paint spray-back. The lint-free laminated polyurethane fabric resists solvents and are cleanroom-processed to avoid shedding materials and prevent paint contamination. Made with latex-free materials to reduce the risk of allergies.
-
Endura® 378KGTVB
Product ID: 378KGTVBCold-rated multi-hazard protection with cut resistance, padded palms, and liquid resistance
Our Endura® 378KGTVB goatskin gloves protect against multiple types of hazards while keeping hands warm down to -20°C / -4°F. Ideal for outdoor cold protection, they feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A5 cut resistance and impact protection against knocks and bumps. These gloves are treated to resist water and liquids, while the padded palms provide vibration dampening and enhance comfort when material handling.
-
Endura® 375KGVB
Product ID: 375KGVBModerate cut resistance and impact protection with unpadded palms for better grip and feel
Our Endura® 375KGVB protect against cut hazards and are unpadded for better grip and sense of feel. ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance and incidental heat protection. Back-of-hand ANSI 2 impact resistance protects against knocks and bumps. The goatskin leather helps improve dexterity and durability for a longer wear life and has been treated to resist water and liquids.
-
Superior® N10F
Product ID: N10FKeep it clean with lint-free nylon inspector glove
Meeting the needs of assembly line, cleanrooms, food handling and other industries, these lint-free, form-fitting gloves are designed for clean applications.
-
TenActiv™ STAGYPNVB
Product ID: STAGYPNVBHi-viz cut protection with impact resistance and wet grip
Our hi-viz TenActiv™ STAGYPNVB impact-resistant gloves offer cut protection and worker visibility. The TenActiv™ engineered yarn provides 360° cut protection with ANSI A5 cut resistance, while back-of-hand ANSI 1 impact protection guards against knocks and bumps. Micropore nitrile palm coating offers a steady wet grip and improves durability for a longer wear life. Hi-viz knit shell offers better hand placement awareness and worker visibility.
-
Endura® 378GOBTL
Product ID: 378GOBTLCold-rated general use leather gloves that resist liquids in temperatures down to -15°C / 5°F
Our cold-rated Endura® 378GOBTL general use leather gloves resist liquid penetration and are Thinsulate™ lined for cold protection down to -15°C / 5°F. Goatskin leather provides natural abrasion resistance and is treated to resist water and liquids. A keystone thumb design offers improved durability for a longer wear life.
-
Endura® 378GKGVB
Product ID: 378GKGVBMulti-hazard protection with liquid and water resistance for heavy machine operation and maintenance
Our Endura® 378GKGVB goatskin gloves provide multi-hazard protection for heavy machine operation and maintenance, where resistance to liquids is a must. Made with material designed to resist flame, they are arc flash-rated level 3 with an ATPV of 33 cal / cm², offer ANSI 5 heat resistance, and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A5 cut resistance. Treated to resist water and liquids, they feature impact protection against knocks and bumps and padded palms for comfort when material handling.
-
Chemstop™ LF3020
Product ID: LF3020Acid-resistant latex gloves with a strong grip
An excellent non-disposable option for use in food processing, these gloves are made from a flexible, natural latex. They include an embossed leather pattern that improves grip and a cotton flock lining that increases comfort. These gloves also offer protection against a wide range of acids.
-
Endura® 378GOBDTK
Product ID: 378GOBDTKPuncture-resistant, oil and water repelling gloves for work in extreme cold
Intended for use in extreme cold, these driver gloves are made from a tough goat-grain leather that provides ANSI Level 4 puncture resistance. They feature a Thinsulate™ lining to keep hands warm in temperatures down to -30°C / -22°F. An Oilbloc™ treatment provides a high level of oil resistance while a Waterstop™ treatment repels oil, water and stains. Furthermore, a knitwrist turtleneck cuff extension locks in warmth.
-
Chemstop™ NIF3018
Product ID: NIF3018Comfortable chemical-resistant with flock lining for comfort and extended forearm protection
Our Chemstop™ NIF3018 chemical gloves offer a cool, comfortable feel and extended forearm protection. These 15 mil thick nitrile gloves protect against a wide range of chemicals and solvents, including oil, fuel, and methanol. Their 12-inch length provides extra forearm coverage and are cotton flock-lined to absorb sweat. An embossed finish offers steady grip that’s CFIA-compliant for safe food handling.
-
Chemstop™ NI3012
Product ID: NI3012Chemical-resistant 12-inch gloves with forearm coverage
Our Chemstop™ NIF3012 gloves are 12 inches long and offer chemical resistance with extended forearm protection. These 12 mil thick nitrile gloves protect against a wide range of chemicals and solvents, including oil, fuel, and methanol. Their 12-inch length provides extra forearm coverage and a textured palm finish offers steady grip that’s CFIA-compliant for safe food handling.