-
TenActiv™ S21TXUFNLTC
Product ID: S21TXUFNLTCMaximum cut protection with reinforced thumb crotch for durability
Our TenActiv™ S21TXUFNLTC gloves provides the industry’s highest level of cut protection in a thin 21-gauge knit for a barehand feel. They feature a reinforced leather thumb crotch for added durability and wear making them ideal extreme cut hazard tasks that require added abrasion resistance. The ultra-thin foam nitrile palm coating is touchscreen compatible and provides a strong, steady grip when working in lightly oiled conditions.
-
Dexterity® S15GPNVB
Product ID: S15GPNVBThin gloves with cut and impact protection plus micropore nitrile palm coating for steady wet grip
Our Dexterity® S15GPNVB gloves offer cut resistance and impact protection plus a micropore nitrile palm coating for better wet grip. They provide 360° of cut protection with ANSI level 5 cut resistance plus back-of-hand ANSI 2 impact protection against knocks and bumps. Micropore nitrile palm coating offers a steady wet grip and helps prevent water from seeping in.
-
TenActiv™ STAGFNP
Product ID: STAGFNPLightweight, strong grip gloves that guard against cuts and punctures
A 13-gauge TenActiv™ shell provides these lightweight gloves with ANSI Level 4 abrasion resistance and 360° ANSI Level A4 cut protection without impeding dexterity or mobility. Leather palm patches placed at the palm and thumb crotch reinforce critical wear areas boost puncture resistance to ANSI Level 5. Foam nitrile palm coatings provide a strong, steady grip in lightly oiled conditions while providing ANSI Level 3 palm puncture resistance.
-
TenActiv™ S13TAXFN
Product ID: S13TAXFNTough knit gloves with a strong grip that guard against abrasion, cuts, and punctures
Intended for use in metal manufacturing, these tough knit gloves are made from a blend of steel, TenActiv™, and composite filament-fiber that provide ANSI Level A5 cut protection. Their foam nitrile palm ensures a strong, steady grip on wet or lightly oiled surfaces in addition to ANSI Level 4 abrasion resistance and ANSI Level 3 puncture resistance.
-
Emerald CX® SCXPNTFC
Product ID: SCXPNTFCTop level 360° cut protection and a strong grip meets liquid resistance
These gloves are made from a blend of DuPont™ Kevlar® fiber and Wire-Core™ steel, providing 360° ANSI Level A5 cut protection, ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. An all-over coating makes them liquid resistant, and a micropore nitrile coating ensures a suction-cup like grip in wet and oily conditions. The gloves remain highly comfortable and dexterous, suiting them to work in metal fabrication, automotive manufacturing and more.
-
Dexterity® S13KGPN
Product ID: S13KGPNA superior grip combined with 360° cut protection
A micropore nitrile coating that creates tiny, suction cup-like craters on the palms gives these gloves an unsurpassed level of grip on wet and oily surfaces. Their DuPont™ Kevlar® fiber construction provides 360° ANSI Level A4 cut protection, ANSI Level 3 abrasion resistance, and ANSI Level 2 puncture resistance. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas. These gloves are fully launderable, allowing them to be cleaned and refreshed with ease.
-
Dexterity® S13KFGFNT
Product ID: S13KFGFNT360° cut protection matched with a strong, steady grip
These 13-gauge knit gloves match outstanding dexterity with cut resistance. A composite blend of DuPont™ Kevlar® fiber wrapped around composite filament fiber delivers 360° ANSI Level A4 cut protection, ANSI Level 3 puncture resistance and ANSI Level 4 abrasion resistance. A foam nitrile coating at the palms provides a firm grip on lightly oiled surfaces. A reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
Emerald CX® S13CXPNT
Product ID: S13CXPNTSilicon-free touchscreen compatible gloves with protection against cut and heat hazards plus wet grip
Our Emerald CX® S13CXPNT gloves are silicon-free, protect against cut and heat hazards, and are touchscreen compatible. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A6 cut resistance and ANSI 5 heat protection. Micropore nitrile palm coating offers a steady wet grip and helps prevent water from seeping in.
-
TenActiv™ STAGPN
Product ID: STAGPNCut resistant gloves with a strong and steady grip
These 13-gauge gloves feature a TenActiv™ composite filament fiber yarn that provides ANSI Level A5 cut protection, while a micropore nitrile coating ensures a steady grip even on wet or oily surfaces. They’re breathable and ergonomically shaped for a high degree of comfort and they further enhance safety by offering ANSI Level 4 abrasion resistance. The reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ STAFGPU
Product ID: STAFGPUDurable cut-resistant everyday gloves with non-marring palms for dry grip and sense of feel
Our TenActiv™ STAFGPU gloves offer cut resistance with polyurethane palm coating for a stronger dry grip and tactile feel. The TenActiv™ engineered yarn liner provides 360° cut protection with high ANSI A5 cut resistance while non-marring palms are ideal for assembly, glass, and material handling.
-
TenActiv™ STAFGFNT
Product ID: STAFGFNTTouchscreen compatible moderate cut protection with a steady wet grip
Our TenActiv™ STAFGFNT gloves provide moderate cut protection with touchscreen compatible steady wet grip. TenActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance. Foam nitrile palm coating offers steady wet grip and touchscreen compatibility to seamlessly move between tasks. Ideal for general use work.
-
TenActiv™ STACXPURT
Product ID: STACXPURTCut-resistant with maximum abrasion and reinforced thumb crotch for extra durability and dexterity when material handling
Our maximum abrasion TenActiv™ STACXPURT gloves with polyurethane palm coating and nitrile reinforced thumb crotch add extra durability and dexterity when material handling. The TenActiv™ engineered yarn liner provides 360° cut protection with high ANSI A6 cut resistance. Touchscreen compatible non-marring gloves are suitable when dealing with finished metal and glass material.
-
TenActiv™ STACXPNRT
Product ID: STACXPNRTExtreme cut protection with reinforced nitrile thumb crotch for material handling and longevity
These gloves are made with TenActiv™ engineered yarn that provides 360° cut protection with extreme ANSI A7 cut resistance while a nitrile reinforced thumb crotch protects against wear and tear when material handling. Their micropore nitrile palm coating offers steady wet grip and is touchscreen compatible for moving between tasks.
-
TenActiv™ S18TAFG
Product ID: S18TAFGTop-notch cut protection matched with superior dexterity
These 18-gauge knit gloves are made from a lint-free, continuous filament yarn that’s stronger than steel yet conforms to the hand for an unparalleled level of dexterity. Wear them alone for work that requires a highly tactile touch and 360° ANSI Level A4 cut protection or utilize them as liners worn under another pair of gloves for added cut resistance.
Note: Size 4 is Made to Order
-
Dexterity® S13KF
Product ID: S13KFDexterous, cut resistant lightweight liners
These lightweight string knit gloves are made from a fine-gauge, composite filament fiber wrapped with para-aramid fibers for 360° ANSI Level A4 cut protection and ANSI Level 3 abrasion resistance. Cut resistance combined with a close, ergonomic shape means they can be easily worn as liners under other gloves for extra protection.