-
Endura® 399GKGL5L
Product ID: 399GKGL5LMIG welding gloves designed for a woman’s hands
Abrasion resistant goatskin leather and durable keystone thumbs optimize these MIG welding gloves for the long haul, while 6″ gauntlet cuffs provide extra coverage when heat is a hazard. A cut-and-sewn construction gives these gloves a close, dexterous fit, and their lining made with blended aramid provides 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. Testing places these gloves at an arc flash level 3 rating, and ANSI level 3 heat rating.
-
TenActiv™ STAGBMPVB
Product ID: STAGBMPVBErgonomically shaped microfiber palms for more grip and dexterity than typical leather plus extreme cut resistance
Our TenActiv™ STAGBMPVB gloves feature ErgoHyde microfiber palms that provide improved hand movement and more grip than typical leather. TenActiv™ engineered yarn provides 360° cut protection with extreme ANSI A7 cut resistance, plus hi-viz back-of-hand bumpers offer improved hand placement visibility and ANSI 2 impact protection. Treated to resist water and liquids, their ErgoHyde palms offer an outstanding range of motion plus strong grip in wet conditions.
-
Dexterity® S13PFNP
Product ID: S13PFNPHighly dexterous, puncture-resistant gloves with a strong grip
Made from a 13-gauge polyester shell, these gloves provide ANSI Level 3 abrasion resistance and ANSI Level 3 puncture resistance. Leather patches placed at the palm and thumb crotch areas boost puncture resistance to ANSI Level 5. These dexterous gloves remain highly flexible while protecting from punctures and scrapes. A nitrile palm coating provides a strong, steady grip.
-
Endura® 378GKG4P
Product ID: 378GKG4PMulti-feature driver gloves with extreme impact resistance and arc flash protection
This multi-feature glove features our 4PRO™ back-of-hand protection to deliver maximum impact resistance that is more flexible and dexterous. In addition to being one of the first gloves on the market to offer ANSI Level 3 impact resistance (the industry’s highest impact rating level), these gloves provide 360° cut resistance with ANSI Level A5 cut protection thanks to their lining made with ParaActiv™ engineered yarn . This feature-packed glove also includes vibration-dampening palms, is treated to resist water and liquids, and has been arc flash tested for Level 3 with an ATPV of 35 cal/cm².
-
SUPERA™ FR WCKVFR
Product ID: WCKVFRFire-resistant watch cap that is ultra soft and non-irritating for all-day comfort
This fire-resistant (FR) cap is designed for maximum comfort and all-day wear with a two-layer Kermel®-viscose blend that is non-irritating and feels soft against the skin. Even better, the beanie is made of a fabric with inherent FR properties that won’t diminish with laundering, allowing for easy refresh between uses. It’s an excellent choice for construction, mining, utility work, and jobs that involve oil and gas. It’s both NFPA 70E compliant and CAT2; Ebt 16 cal/cm².
-
Cool Grip® SKX-W4
Product ID: SKX-W4360°cut protection matched with heat resistance and added forearm protection
These gloves are made from a tough DuPont™ Kevlar® fiber and carbon blend that provides 360° ANSI Level A4 cut protection and ANSI Level 5 heat resistance. They feature 4″ gauntlet cuffs for enhanced forearm protection. Their 100% knit terry liner traps air in to provide further protection from thermal contact. A high level of dexterity makes these gloves adept at handling hot pieces of machinery.
-
Endura® 399GKGL5
Product ID: 399GKGL5All-round fabrication and MIG welding glove with arc flash protection
Our Endura® 399GKGL5 goatskin gloves are ideal for MIG welding and all-round fabrication use. Made with material designed to resist flame, these gloves are arc flash-rated level 3 with an ATPV of 36 cal / cm² and feature ParaActiv™ thread for added seam integrity and durability. They also feature a ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A4 cut resistance and ANSI 3 heat protection while extended gauntlet cuffs provide extra wrist protection.
-
Endura® 378KMT4P
Product ID: 378KMT4POur most feature-packed winter glove to protect against impact, cuts and cold
These tough goatskin multi-hazard driver gloves feature our 4PRO™ back-of-hand protection to deliver maximum impact resistance that doesn’t compromise mobility, even in freezing cold temperatures. The lining is made with DuPont™ Kevlar® fiber which provides 360° cut protection and ANSI Level A6 cut resistance. These feature-packed gloves also include vibration-dampening palms and are treated with Oilbloc™ to repel water and oil.
-
Endura® 378KGTVB
Product ID: 378KGTVBCold-rated multi-hazard protection with cut resistance, padded palms, and liquid resistance
Our Endura® 378KGTVB goatskin gloves protect against multiple types of hazards while keeping hands warm down to -20°C / -4°F. Ideal for outdoor cold protection, they feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A5 cut resistance and impact protection against knocks and bumps. These gloves are treated to resist water and liquids, while the padded palms provide vibration dampening and enhance comfort when material handling.
-
Endura® 378GKVSB
Product ID: 378GKVSBImpact and liquid resistant plus padded palms for material handling
Our Endura® 378GKVSB leather gloves resist liquid and protect against impact hazards. Featuring back-of-hand bumpers for ANSI 2 impact protection against knocks and bumps, they’re treated to resist water and liquids. Padded palms offer comfort when material handling.
-
Endura® 378GKGVBG
Product ID: 378GKGVBGCut-resistant impact protection with padded palms for material handling plus extended cuffs for wrist safety
Our Endura® 378GKGVBG feature padded palms for comfort when material handling and offer protection against cuts and impacts . TenActiv™ engineered yarn liner provides 360° cut resistance with ANSI A6 cut protection plus back-of-hand ANSI 2 impact resistance guards against knocks and bumps. Extended gauntlet cuffs provide additional wrist safety.
-
Endura® 375KGVB
Product ID: 375KGVBModerate cut resistance and impact protection with unpadded palms for better grip and feel
Our Endura® 375KGVB protect against cut hazards and are unpadded for better grip and sense of feel. ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance and incidental heat protection. Back-of-hand ANSI 2 impact resistance protects against knocks and bumps. The goatskin leather helps improve dexterity and durability for a longer wear life and has been treated to resist water and liquids.
-
Endura® 375GKGVB
Product ID: 375GKGVBImpact-resistance with 360° cut protection and vibration dampening
The ParaActiv™ engineered yarn lining within these tough goatskin driver gloves offers 360° ANSI Level A5 cut protection. Medium-duty impact-resistant back-of-hand protection safeguards hands with minimal effect on flexibility and dexterity. Gel pads at the palm counteract vibrations, and an Oilbloc™ treatment assures the highest level of oil and water resistance.
-
Chemstop™ S15KGVNVB
Product ID: S15KGVNVBHi-viz chemical gloves with cut protection and impact resistance
Our Chemstop™ S15KGVNVB PVC chemical gloves feature hi-viz impact-resistant bumpers for back-of-hand protection and a ParaActiv™ engineered yarn liner with high ANSI A5 cut resistance. The nitrile hand coating offers steady wet grip, while the gauntlet cuffs provide extra wrist safety.
-
Chemstop™ S15KGVNFVB
Product ID: S15KGVNFVBHi-Viz chemical resistant gloves that protect against cuts and keep hands warm down to -5°C / 23°F
Featuring impact-resistant back-of-hand protection, chemical-resistant PVC and full aramid fiber lining that ensures ANSI Level A6 cut protection, these fleece-lined winter gloves guard against a wide variety of risks. Their fleece lining ensures that hands stay warm in temperatures down to -5°C (23°F), and a nitrile coating provides a secure grip on even wet and slippery surfaces. Gauntlet cuffs increase wrist safety and hi-viz backs offer enhanced visibility.
-
Endura® 378GOBKL
Product ID: 378GOBKLArc flash-rated for non-energized work with cut protection and liquid resistance
Our Endura® 378GOBKL goatskin gloves are ideal for non-energized work where arc flash is present and liquid resistance is a must. Made with material designed to resist flame, they are arc flash-rated level 4 with an ATPV of 40 cal / cm², offer ANSI 3 heat resistance, and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A4 cut resistance. These gloves are treated resist water and liquids, while the palms are unpadded for steady grip and a better sense of feel when performing tasks.
-
Endura® 378GKTFG
Product ID: 378GKTFGDurable arc flash-rated gloves with high cut protection for longer wear life
Our Endura® 378GKTFG gloves protect hands from flash fires and are made from premium goatskin for added durability and a longer wear life. Arc flash-rated level 3 with an ATPV of 36 cal / cm², they offer ANSI 3 heat resistance and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A5 cut resistance.
-
Endura® 378GOBDTK
Product ID: 378GOBDTKPuncture-resistant, oil and water repelling gloves for work in extreme cold
Intended for use in extreme cold, these driver gloves are made from a tough goat-grain leather that provides ANSI Level 4 puncture resistance. They feature a Thinsulate™ lining to keep hands warm in temperatures down to -30°C / -22°F. An Oilbloc™ treatment provides a high level of oil resistance while a Waterstop™ treatment repels oil, water and stains. Furthermore, a knitwrist turtleneck cuff extension locks in warmth.
-
Clutch Gear® MXVSB
Product ID: MXVSBImpact-resistant hi-viz mechanic gloves for small parts handling
Our hi-viz Clutch Gear® MXVSB gloves offer back of hand ANSI 2 impact resistance that won’t sacrifice dexterity. Strategically placed patches on the palm and fingertips provide better grip and durability. Reinforced thumb crotches increase wear resistance in critical areas. The adjustable hook and loop wrist closure to provide a snug and comfortable fit while adding an extra layer of protection.
-
Endura® 378GKGDT
Product ID: 378GKGDTGeneral purpose protection against cuts plus cold protection down to -20°C / -4°F
Our Endura® 378GKGDT gloves keep hands warm down to -20°C / -4°F and offer cut protection plus oil resistance. The ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A5 cut resistance. Keystone thumb design helps improve durability without impeding dexterity, making it suitable for material handling.
-
Endura® 375GTVB
Product ID: 375GTVBWinter impact protection for temperatures down to -20°C / -4°F
These winter-ready driver gloves provide warmth down to temperatures of -20°C / -4°F. Tough goatskin leather treated with Oilbloc™ ensures top-notch oil resistance. They benefit from enhanced back-of-hand protection that dulls impact without impeding ease of movement, and the strategic placement of double-weight Thinsulate™ provides warmth where it’s needed most while ensuring mobility, flexibility and dexterity.
-
Cool Grip® SKX-W
Product ID: SKX-WHeat protection and comfort for handling heavy components in metal fabrication and stamping
Our Cool Grip® SKX-W gloves are designed for heavy-duty tasks in metal fabrication and stamping. The wool lining provides cushioning for comfort when handling heavy components while protecting hands from heated parts. These gloves also feature ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A4 cut resistance and ANSI 5 heat protection.