-
Dexterity® S18KGDNE
Product ID: S18KGDNEArc flash protection with touchscreen compatibility plus additional wrist cut protection to guard against sharp edges
Our arc flash-rated Dexterity® S18KGDNE gloves offer protection against cut hazards and unfinished edges and are touchscreen friendly to seamlessly move between tasks. Arc flash-rated level 3 with an ATPV of 25 cal / cm², they’re made from electrostatic dissipative ParaActiv™ engineered yarn to protect microelectronics and provide 360° cut protection with ANSI A3 cut resistance. Additionally, the cuffs offer ANSI A6 cut protection for protection against sharp edges found in electrical boxes. These gloves also feature a neoprene palm coating material that is known to resist flame for steady grip.
-
Emerald CX® S13CXSI
Product ID: S13CXSIHeat and cut protection with non-marring palms to resist adhesives, liquid, and won’t leave residue
Our Dexterity® S13CXSI cut-resistant gloves are non-marring and offer protection against adhesives, liquid, and heat. ParaActiv™ engineered yarn material provides 360° cut protection with high ANSI A6 cut resistance and ANSI 3 heat protection. Maximum ANSI 6 abrasion resistance offers protection and long wear life plus their non-marring silicone palm coating provides liquid and adhesive resistance.
-
Dexterity® S13NSI
Product ID: S13NSIAdhesive and heat resistant non-marring gloves for steady grip and durability
Our Dexterity® S13NSI gloves are non-marring and offer protection against adhesives, liquid, and heat. These gloves offer ANSI 3 heat protection and feature non-marring silicone palm coating for liquid and adhesive resistance. Maximum ANSI 6 abrasion resistance offers protection and long wear life making them ideal for handling hot material.
-
TenActiv™ STAGBLPVB
Product ID: STAGBLPVBErgonomically shaped leather palms for more grip and dexterity than typical leather plus extreme cut resistance
Our TenActiv™ STAGBLPVB gloves feature ErgoHyde leather palms that provide improved hand movement and more grip than typical leather. TenActiv™ engineered yarn provides 360° cut protection with extreme ANSI A8 cut resistance, plus hi-viz back-of-hand bumpers offer improved hand placement visibility and ANSI 2 impact protection. Treated to resist water and liquids, their ErgoHyde palms offer an outstanding range of motion plus strong grip in wet conditions.
-
Endura® 398GDP
Product ID: 398GDPThe next generation safety glove delivers unbeatable comfort and durability
We’ve made our classic safety gloves even better. Re-engineered using modern glove design and technology, these gloves feature a double-layered goatskin palm for increased durability while remaining supple for better dexterity than typical double-palmed safety gloves. The sewing thread is made with Kevlar® fiber for added seam integrity. And the cuff expands, allowing for a comfortable fit over a jacket or sleeve.
-
Endura® 378GTXOTL
Product ID: 378GTXOTLHi-viz cut protection with palm strips for grip that keep hands warm down to -30°C / -22°F
Our Endura® 378GTXOTL winter gloves feature hi-viz fingertips and cut protection along with insulation to protect against temperatures down to -30°C / -22°F . The TenActiv™ engineered yarn liner provides 360° cut protection with high ANSI A6 cut resistance. Their strategically placed, patent pending palm strips increase grip and reduce bunching.
-
Endura® 378GTXOT
Product ID: 378GTXOTCut resistance with patented palm strips for enhanced grip and hi-viz orange fingertips for visibility
Our cut-resistant Endura® 378GTXOT gloves feature our patented palm strips for improved grip and hi-viz orange fingertips for worker visibility. TenActiv™ engineered yarn liner provides 360° cut protection with ANSI A5 cut resistance, while palm-grip technology offers a sturdier grip without hindering dexterity. Hi-viz orange fingertips improve worker prominence and offer hand placement visibility.
-
TenActiv™ KTAG1T
Product ID: KTAG1TCooling, cut-resistant sleeves
These cool-to-the-touch sleeves provide relief from the heat while ensuring ANSI Level A2 cut protection. Thanks to their STAYz-UP™ elasticized armbands, sleeves will stay in place to provide all-day arm protection from cuts, dirt, and abrasion.
-
Contender™ KPXT
Product ID: KPXTFire- and cut-resistant sleeves that stay in place
Optimized for jobs with a high risk of exposure to sparks or flames, these 22 inch sleeves are constructed from fire-resistant Protex® fiber that will not burn, melt, or drip. Their double-layer tapered knit provides ANSI Level A2 cut protection, while the combination of STAYz-UP™ elasticized armbands and convenient thumbholes prevents slippage.
-
TenActiv™ KPSTA18TH
Product ID: KPSTA18THExtreme cut protection sleeves with twice the amount of stretch
These tubular sleeves combine extreme cut resistance with an unbeatable level of comfort. Their tough construction provides ANSI Level A9 cut protection and ANSI Level 5 puncture resistance. Thumbholes combined with elasticized STAYz-UP™ armbands ensure a secure fit while SMART-TENSION technology provides twice the amount of stretch and recovery as compared to previous generations. These sleeves are FDA- and CFIA-compliant.
-
Contender™ KPG1T22TH
Product ID: KPG1T22THSingle layer cut-resistant sleeves with elasticized biceps for better motion and comfort
Our Contender™ KPG1T22TH single-layer sleeves offer excellent flexibility, motion, and breathability while providing 360° cut protection with high ANSI A5 cut protection. Their elasticized biceps with grip, thumbhole design, and tapered shape ensures a better fit that stays in place.
Also available in 18″ (KPG1T18TH)
-
Cutban™ KP1T
Product ID: KP1TStay-in-place sleeves that combine comfort with cut protection
Made from recycled material, these sleeves are constructed from a single-layer filament yarn that provides ANSI Level A2 cut protection. Their tapered construction and STAYz-UP™ elasticized biceps provide added comfort and ensure they stay in place during long work hours. These sleeves are available in silicone-free and Lycra-free versions, as well as with or without thumbholes.
-
Contender™ KGC1T
Product ID: KGC1TFlame-resistant sleeves that defend against cuts, punctures and abrasion
A must-have for any job site where flames and sparks may pose a hazard, these protective sleeves include a tapered fit and elasticized STAYz-UP™ armbands to ensure comfort and prevent sliding. Their Kevlar™ and composite filament fiber blend yarn delivers ANSI Level A4 cut protection, ANSI Level 1 abrasion resistance, and ANSI Level 2 puncture resistance. Flame-resistant properties ensure these sleeves won’t burn, drip or melt and a dark green color hides stains.
-
Contender™ KG/CE22TH
Product ID: KG/CE22THDouble-layered incidental cut and heat arm protection for material handling
Our Contender™ KG/CE22TH sleeves protect arms from incidental cut and heat when material handling. A double layer construction safeguards against sharp edges and the cotton-blend adds comfort for all day wear. The silicone-free construction makes these sleeves ideal for handling surfaces prior to painting and the ParaActiv™ engineered yarn liner provides incidental ANSI A4 cut resistance and ANSI 2 heat protection.
-
Contender™ KFG
Product ID: KFGCut resistant sleeves with a snug, reliable fit
Aramid-encased, composite filament fiber yarn provides ANSI Level A4 cut protection. These sleeves are approved for 4.5 seconds of incidental heat contact up to 315°C / 600°F. Elasticized armbands made with STAYz-UP™ technology eliminate any sliding or slipping of the sleeves, guaranteeing a snug, reliable fit.
Available in a tubular or tapered fit, with or without thumbholes, in a variety of sizes that range from 10″ to 22″
-
Contender™ KAW1C10
Product ID: KAW1C10Heat-resistant sleeves that guard against cuts
Knit from a single-layer para-aramid fiber that provides ANSI Level A2 cut protection, these tubular knit sleeves protect the entire length of the arm when working with metals. Their heat-resistant construction offers strong resistance to sparks, flames and heat, while a snug fit follows the natural contours of the arm to provide enhanced comfort.
-
Contender™ KAWC
Product ID: KAWCCut-resistant sleeves that guard against sparks, flames, and heat
Knit from a double-layer para-aramid fiber that provides ANSI Level A3 cut protection, these tubular knit sleeves protect the entire length of the arm when working with metals. Their heat-resistant construction guards against sparks, flames and heat, while a snug fit follows the natural contours of the arm to provide enhanced comfort.
Available in a variety of sizes ranging from 6″ – 22″, with or without thumbholes
-
TenActiv™ S18WTLFN
Product ID: S18WTLFNWaterproof cut-resistant gloves that keep hands warm down to -10°C / 14°F
This waterproof glove provides a high level of warmth with minimal bulk, thanks to an acrylic terry liner that keeps hands warm in temperatures down to -10°C / 14°F. The combination of a nitrile palm coating and a laminated waterproof membrane optimizes these gloves for handling soaked or oil-slicked parts. Their TenActiv™ knit assures ANSI Level A4 cut protection, a reinforced thumb crotch extends the lifespan by reducing wear in high-stress areas.
-
TenActiv™ S18WTFN
Product ID: S18WTFNWater and wind protection with laminated anti-slip layers for better grip plus cut resistance
Our waterproof and windproof TenActiv™ S18WTLFN gloves protect skin from harsh environments while remaining breathable. The unique membrane lamination prevents layers from slipping, providing a comfortable fit and reliable grip. TenActiv™ engineered yarn material provides 360° cut protection with ANSI A4 cut resistance plus the foam nitrile palm coating offers a steady wet grip.
-
TenActiv™ S18TAXFN
Product ID: S18TAXFNUltra-thin hi-viz gloves with maximum cut protection with better sense of touch and hand placement awareness
Our TenActiv™ S18TAXFN hi-viz gloves provide maximum cut resistance in an ultra-thin form for a better sense of feel. TenActiv™ engineered yarn offers 360° cut protection with extreme ANSI A9 cut resistance, plus their foam nitrile palm coating provides steady wet grip and are touchscreen compatible to seamlessly move between tasks.
-
TenActiv™ STAGBPU
Product ID: STAGBPUBlack knit cut-resistant gloves that hide dirt and stains for longer wear life
Our TenActiv™ STAGBPU gloves are made from dark colored TenActiv™ engineered yarn to hide dirt and stains while protecting worker hands from cut hazards. The low-linting dark coloring allows these gloves to be used longer between laundering cycles, increasing their wear-life. They are ideal for work in unfinished or grimy environments where dirt is visible. Featuring moderate 360° cut protection with ANSI A4 cut resistance and polyurethane dipped palms for dry grip, they balance protection and comfort with a bare hand feel and dexterity.
-
TenActiv™ S18TAFGPU
Product ID: S18TAFGPUUltra-thin moderate cut protection for better hand movement with a bare hand feel and dry grip
Our TenActiv™ S18TAFGPU gloves protect against cut hazards and offer a bare hand feel with dry grip and outstanding dexterity. TenActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance, while their polyurethane palm coating offers steady dry grip and tactile feel. Ideal for small parts handling, their white shell helps spot dirt and contamination.
-
Dexterity® S18KGFN
Product ID: S18KGFNStrong grip, cut-resistant, touchscreen compatible gloves
ANSI Level A3 cut protection, a grip-strengthening foam nitrile palm coating and a close, tactile feel allows these high-dexterity gloves to excel at handling small parts and completing precise tasks. They’re made with cut-resistant DuPont™ Kevlar® fiber and have been treated with an active agent to achieve a 99.9% antimicrobial status. They’re also touchscreen compatible for added convenience.
-
Dexterity® S15NT
Product ID: S15NTComfort and dexterity that protects against punctures and abrasion
These versatile gloves are proudly made in Canada from a cotton seamless knit shell that provides outstanding dexterity and comfort. A nitrile-dipped palm coating, which over time, forms to fit the user’s hand, offers ANSI Level 4 abrasion resistance and ANSI Level 2 puncture resistance. The nitrile palm coating features an additive to make them biodegradable.