-
Endura® 365DLX6KG
Product ID: 365DLX6KGCut-resistant lineman gloves with extended hi-viz cuffs for visibility
Our Endura® 365DLX6 lineman gloves protect hands from cuts and feature a hi-viz 6-inch cuff for better visibility. Made from durable horse leather, they feature a double-leather palm patches in high-wear areas and a ParaActiv™ engineered yarn liner that offers 360° cut protection with moderate ANSI A4 cut resistance. These gloves are treated to repel water, liquids, and stains.
-
Endura® 361DLXTKG
Product ID: 361DLXTKGLineman mitts with 360° cut resistance that keep hands warm down to -15°C / 5°F
These cowgrain leather mitts meet the ANSI/ ISEA 107-2015 standard for high visibility, thanks to cuffs that feature 3M™ retroreflective silver strips and high-viz bands.
They’ve been treated with Waterstop™ to repel water and oil, and their Thinsulate™ lining retains warmth down to temperatures of -15°C / 5°F.
Durability is assured through double-leather palm patches in high-wear areas. Lined with ParaActiv™ engineered yarn , these mitts provide 360° cut protection.
-
Endura® 378GOBTX
Product ID: 378GOBTXGoatskin driver gloves with short cuffs that resists oil and water, along with a maximum cut liner
Our Endura® 378GOBTX goatskin driver gloves are treated with Oilbloc™ to resist oil and water, as well as short cuffs and ANSI Cut Level A9 TenActiv liner. The short cuffs are a safety cuff and the seamless knit liner ensures a more soft, cooler, and comfortable fit. The goatskin leather provides more dexterity and durability. Ideal for working in high cut hazard conditions where oil and water resistance is needed.
-
Endura® 361GTLVB
Product ID: 361GTLVBCold-rated winter mitt with impact protection plus knit cuffs to keep out debris and hazards
Our Endura® 361GTLVB mitts feature back of hand impact resistance to protect hands against knocks and bumps and are cold-rated for temperatures down to -35°C / -31°F. Leather is treated to resist liquids while the knit cuffs to help keep out dirt, debris, and other hazards. Finger slots in the mitt help reduce hand fatigue when handling material.
-
Endura® 399GCXL5
Product ID: 399GCXL5All-round fabrication gloves with maximum cut protection for material handling
Our Endura® 399GCXL5 FR gloves offer maximum cut protection, making them ideal for material handling where cut hazards are present. These all-round fabrication gloves are made with material designed to resist flame and feature a ParaActiv™ engineered yarn liner for 360° cut protection with extreme ANSI A9 cut resistance and ANSI 2 heat protection. Extended gauntlet cuffs provide extra wrist protection.
-
Endura® 399GKGTL5
Product ID: 399GKGTL5Moderate cut protection with extended gauntlet cuffs and protection from cold down to -20°C / -4°F
Our Endura® 399GKGTL5 gloves feature a ParaActiv™ liner that provides 360° cut protection with ANSI A4 cut resistance. They keep hands warm in temperatures down to -20°C / -4°F, and their 6″ gauntlet cuffs provide additional protection to wrists and forearms. Designed to conform to hands for a closer fit and more dexterity.
-
Endura® 361GTXLVB
Product ID: 361GTXLVBCold-rated winter mitt with impact protection and extreme cut resistance
Our Endura® 361GTXLVB mitts feature back of hand impact resistance to protect hands against knocks and bumps and are cold-rated for temperatures down to -20°C / -4°F. Leather is treated to resist liquids while the TenActiv™ engineered yarn liner provides 360° cut protection with extreme ANSI A8 cut resistance. Finger slots in the mitt help reduce hand fatigue when handling material.
-
Endura® 399SC4
Product ID: 399SC4Durable general use leather gloves with gauntlet cuffs for wrist protection
Our Endura® 399SC4 gloves are made from tough cowskin for durability and a longer wear life. Ideal for general labor or other low hazard tasks, they feature extended gauntlet cuffs for wrist safety and for easier donning or glove removal.
-
Endura® 399GKGL5L
Product ID: 399GKGL5LMIG welding gloves designed for a woman’s hands
Abrasion resistant goatskin leather and durable keystone thumbs optimize these MIG welding gloves for the long haul, while 6″ gauntlet cuffs provide extra coverage when heat is a hazard. A cut-and-sewn construction gives these gloves a close, dexterous fit, and their lining made with blended aramid provides 360° ANSI Level A4 cut protection and ANSI Level 3 puncture resistance. Testing places these gloves at an arc flash level 3 rating, and ANSI level 3 heat rating.
-
Endura® 370DTIGL
Product ID: 370DTIGLTIG welding gloves designed for a lady's hands for better fit and protection
Deer skin TIG welding gloves sized for ladies are designed with a cushioned patch on the pinky side to improve longevity and comfort while welding, and sewn with DuPont™ Kevlar® fiber to reduce the likelihood of getting burnt out when exposed to heat. The deer skin leather provides a high combination of durability, dexterity, and a fine sense of touch without forfeiting flexibility.
-
Endura® 398KGLBGL
Product ID: 398KGLBGLMIG welding gloves designed for women's hands for better fit and protection
Our Endura® 398KGLBGL MIG welding gloves are designed to protect against heat and cuts and fitted for women’s hands. They feature 6″ gauntlet cuffs for added forearm protection while the cushioned wrists increase comfort when welding for extended periods. Padded cowgrain palms offer additional comfort when material handling and back-of-hand fleece lining provides ANSI 2 heat resistance.
-
Vibrastop® VIBGHFV
Product ID: VIBGHFVVibration protection with open fingers for high touch sensitivity
Our Vibrastop™ VIBGHFV gloves feature an open finger design with leather palms that contain engineered vibration dampening material. The open fingers provide the highest level of touch sensitivity while the palms protect against vibrations from repetitive impact. Adjustable straps support the wrist, offering a snug fit and comfort.
-
Endura® 378TXTVB
Product ID: 378TXTVBWinter gloves with high cut resistance, cushioned palms for material handling, and warmth down to -25°C / -13°F
Our Endura® 378TXTVB gloves include reinforced back-of-hand protection and a TenActiv™ liner for high, ANSI A6 cut resistance with 360° cut protection. These water / oil-resistant driver style gloves feature a padded palm that helps dull vibrations and cushions hands when handling heavy parts, while the comfortable liner keeps hands warm down to -25°C / -13°F.
-
Endura® 365DLX2TKG
Product ID: 365DLX2TKGCold-rated lineman gloves with cut protection and 2-inch hi-viz cuffs
Our Endura® 365DLX2TKG lineman gloves feature cut resistance and cold protection. ParaActiv™ engineered yarn liner offers 360° cut protection with moderate ANSI A4 cut resistance and 2-inch cuffs with hi-viz retroreflective bands provide better visibility. They are also Thinsulate™-lined for cold protection in temperatures down to -15°C / 5°F.
-
Endura® 361DLX6
Product ID: 361DLX6Lineman mitts with extended hi-viz cuffs
Our Endura® 361DLX6 lineman mitts feature hi-viz 6-inch cuffs with retroreflective tape for better visibility. Made from durable leather, they feature double-leather palm patches in high-wear areas to protect against wear and tear.
-
Sure Knit™ SRWLP
Product ID: SRWLPFire resistant wool gloves with leather palm for cold temperatures
Our Sure Knit™ SRWLP gloves is designed with a cowhide leather palm for better grip and stringknit wool that is naturally fire resistant, breatheable yet insulated and great for outdoor winter work. The leather palm is also good for material handling, general labour and site clean up.
-
Endura® 304TXTL
Product ID: 304TXTLKeep hands safe from cuts and cold with protection down to -35°C / -31°F
Our Endura® 304TXTL slip-on mitts feature a cut-resistant TenActiv™ liner to protect against sharp objects and keep hands warm down to temperatures of -35°C / -31°F. Their elasticized wrists and faux fur cuffs block out cold to retain warmth in frigid conditions while a pair of plastic clips ensures they won’t be separated in storage.
-
Endura® 399GTXTL5
Product ID: 399GTXTL5High cut protection with extended gauntlet cuffs and protection from cold down to -10°C / 14°F
Our Endura® 399GTXTL5 gloves feature a TenActiv™ liner that provides 360° cut protection with ANSI Level A6 cut resistance. They keep hands warm in temperatures down -10°C / 14°F, and their 6″ gauntlet cuffs provide additional protection to wrists and forearms. Designed to conform to hands for a closer fit and more dexterity.
-
Endura® 505ALB
Product ID: 505ALBAluminized gloves for long sessions of stick welding
Featuring a back-of-hand aluminized layer, our Endura®️ 505ALB gloves protect against radiant heat, ultraviolet light, molten metal, sparks, and splash. They allow hands to stay at comfortable temperatures during extended periods of stick welding or for work in foundries.
-
Endura® 398HG6
Product ID: 398HG6Durability and comfort for all day outdoor work
Our Endura® 398HG6 are made from a hybrid of leathers to optimize each hide’s best quality and improve glove performance. Designed for abrasive outdoor work, they feature long lasting horse leather palms for durability while supple goat grain back of hand and hairsheep fourchettes add flexibility and comfort for all day wear. Tough 6” cowgrain gauntlet cuffs provide extra protection for wrists and forearms.
-
Endura® 398HG2
Product ID: 398HG2Durability and comfort for all day outdoor work
Our Endura® 398HG2 are made from a hybrid of leathers to optimize each hide’s best quality and improve glove performance. Designed for abrasive outdoor work, they feature long lasting horse leather palms for durability while supple goat grain back of hand and hairsheep fourchettes add flexibility and comfort for all day wear. Tough 2” cowgrain cuffs provide wrist protection and makes them easy to don and remove.
-
Endura® 399OBGKG5
Product ID: 399OBGKG5Extended gauntlet metal fabrication driver gloves with water and oil resistance
Our Endura® 399OBGKG5 drivers gloves use durable goatskin treated with Oilbloc™ to resist oil and water. An all-round metal fabrication shop glove, it features wing thumbs to provide extra durability while 6″ gauntlet cuffs ensure added arm protection. The lining is cut-and-sewn for a comfortable fit that won’t bunch and is made with DuPont™ Kevlar® fiber for 360° cut protection with ANSI Level A4 cut resistance.
-
Endura® 305GE
Product ID: 305GEOil resistant TIG welding gloves with improved dexterity and grip
Our Endura® 305GE TIG welding gloves provide heat resistance in temperatures up to 200°C / 392°F while resisting stains and oil for additional grip. The elk leather construction provides a thinner shell for better dexterity and hand-feel that won’t sacrifice durability. 4” cuffs feature a pull tab for easy donning while sewing thread made with DuPont™ Kevlar® fiber is used throughout for added seam integrity against sparks.
-
Endura® 305ENLB
Product ID: 305ENLBOutstanding dexterity and sense of feel for long periods of precise TIG welding
Our Endura® 305ENLB TIG welding gloves provide protection for long welding sessions that require more touch sensitivity for precise work. Featuring ANSI 2 heat protection, the elk leather palms provide a thinner shell for better dexterity and sense of feel that doesn’t sacrifice durability. Back-of-hand liner provides additional ambient heat resistance and spark protection for long welding sessions. Sewn with ParaActiv™ thread for added seam integrity and extended gauntlet cuffs provide additional wrist safety.
-
Endura® 505GP
Product ID: 505GPMIG welding gloves with zoned reinforcements, balancing flexibility with protection against sparks and filler wire injuries
Our Endura® 505GP gloves feature strategically placed leather reinforcements with ANSI 5 probe puncture resistance for protection against filler wire injuries and sparks without impeding dexterity. Ideal for MIG welding, they provide ANSI A3 heat resistance while their goatskin leather construction improves dexterity and durability for a longer wear life. These gloves are treated to resist water and liquids.
-
Endura® 678GDTLK
Product ID: 678GDTLKGloves that keep hands warm and dry to -45°C / -49°F
Designed for workers whose hands are more vulnerable to the cold due to less physical exertion in their everyday work, these winter gloves are designed to retain warmth down to -45°C (-49°F). In addition to their double-weight Thinsulate™ lining, these gloves feature a waterproof membrane to keep hands dry in damp conditions. These gloves also features a touchscreen index fingertip.
-
TenActiv™ STAWLP
Product ID: STAWLPKnit with leather palms for comfort and durability that protect against cut hazards when material handling
Our TenActiv™ STAWLP offer cut resistance when material handling. TenActiv™ engineered yarn provides 360° cut protection with ANSI A6 cut resistance. Leather palms help improve durability and comfort, making them ideal for handling heavy metal parts and other sharp objects.
-
TenActiv™ STAGBLPVB
Product ID: STAGBLPVBErgonomically shaped leather palms for more grip and dexterity than typical leather plus extreme cut resistance
Our TenActiv™ STAGBLPVB gloves feature ErgoHyde leather palms that provide improved hand movement and more grip than typical leather. TenActiv™ engineered yarn provides 360° cut protection with extreme ANSI A8 cut resistance, plus hi-viz back-of-hand bumpers offer improved hand placement visibility and ANSI 2 impact protection. Treated to resist water and liquids, their ErgoHyde palms offer an outstanding range of motion plus strong grip in wet conditions.
-
Endura® 378GCXVB
Product ID: 378GCXVBMaximum cut-resistant driver gloves with impact protection plus unpadded palms for better hand motion
Our Endura® 378GCXVB gloves offer maximum cut resistance along with impact protection. ParaActiv™ engineered yarn liner provides 360° cut resistance with extreme ANSI A9 cut protection plus back-of-hand ANSI 2 impact resistance for protection against knocks and bumps. Treated to resist water and liquids plus unpadded palms for an enhanced sense of feel and better grip.
-
Endura® 398GDP
Product ID: 398GDPThe next generation safety glove delivers unbeatable comfort and durability
We’ve made our classic safety gloves even better. Re-engineered using modern glove design and technology, these gloves feature a double-layered goatskin palm for increased durability while remaining supple for better dexterity than typical double-palmed safety gloves. The sewing thread is made with Kevlar® fiber for added seam integrity. And the cuff expands, allowing for a comfortable fit over a jacket or sleeve.
-
Endura® 378GTXOTL
Product ID: 378GTXOTLHi-viz cut protection with palm strips for grip that keep hands warm down to -30°C / -22°F
Our Endura® 378GTXOTL winter gloves feature hi-viz fingertips and cut protection along with insulation to protect against temperatures down to -30°C / -22°F . The TenActiv™ engineered yarn liner provides 360° cut protection with high ANSI A6 cut resistance. Their strategically placed, patent pending palm strips increase grip and reduce bunching.
-
Endura® 378GTXOT
Product ID: 378GTXOTGet a grip on protection without sacrificing comfort
For users in warm environment industries, we’ve created the first leather driver gloves to feature a TenActiv™ liner that is cool to the touch, softer, more comfortable and more breathable than other liner materials. These gloves feature ANSI A5 cut resistance as well as ANSI Puncture Level 4. They also incorporate our patented palm-grip technology to enhance grip and durability.
-
Endura® 378GOBKVB
Product ID: 378GOBKVBArc flash-rated multi-hazard protection with unpadded palms for a wider range of movement plus liquid resistance
Our Endura® 378GOBKVB gloves offer protection against arc flash, cuts, and impact hazards without impeding dexterity. Arc flash-rated level 3 with an ATPV of 34 cal / cm², their ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance. Back-of-hand ANSI 2 impact resistance offers protection against knocks and bumps when working in tight spaces. Treated to resist water and liquids plus unpadded palms for steady grip and a better sense of feel when performing tasks.
-
Endura® 398OBPB
Product ID: 398OBPBPuncture-resistant MIG welding gloves with cut and heat protection
Designed specifically for MIG welding, these gloves feature Punkban™ for ASTM Level 5 hypodermic puncture protection on the thumb and index finger to guard against common welding wire injuries. In addition, the gloves achieved an ANSI Level 3 heat rating and feature a lining made with DuPont™ Kevlar® fiber for 360° cut resistance with ANSI Level A6 cut protection. Their 5″ gauntlet cuffs offer a wider area of coverage. Cushioned wrists ensure comfort during long working days. Black goatskin leather hides grease and oil stains.
Sold in left-handed (398OBPBLH) and right-handed (398OBPBRH) versions: one of the gloves in the pair features Punkban™ on the thumb and index finger for ANSI Level A5 hypodermic puncture resistance in these areas.
-
Endura® 378KGVB
Product ID: 378KGVBMedium-duty impact-resistant leather gloves with 360° cut protection
These medium-duty impact-resistant gloves feature a lining made with DuPont™ Kevlar® fiber, adding 360° cut resistance with ANSI Level A4 cut protection inside their durable leather shell. In addition, their non-padded palms provide more dexterity and tactility for everyday work where vibration hazards are not a concern.
-
Endura® 378GKG4P
Product ID: 378GKG4PMulti-feature driver gloves with extreme impact resistance and arc flash protection
This multi-feature glove features our 4PRO™ back-of-hand protection to deliver maximum impact resistance that is more flexible and dexterous. In addition to being one of the first gloves on the market to offer ANSI Level 3 impact resistance (the industry’s highest impact rating level), these gloves provide 360° cut resistance with ANSI Level A5 cut protection thanks to their lining made with ParaActiv™ engineered yarn . This feature-packed glove also includes vibration-dampening palms, is treated to resist water and liquids, and has been arc flash tested for Level 3 with an ATPV of 35 cal/cm².
-
Endura® 378GAHVB
Product ID: 378GAHVBGoatskin leather gloves with flexible hi-viz retroreflective back for better visibility and mobility
Our Endura® 378GAHVB gloves offer hi-viz retroreflective back of hand for better visibility and hand placement. Flexible knit back features a hi-viz stripe for visibility while goatskin leather palms help improve dexterity and durability for a longer wear life. The pull-on style allows ease of donning and features an elasticized back for a snug fit.
-
Endura® 378GOB
Product ID: 378GOBEasy-on goatskin gloves that resist oil and water
Elasticized backs and a slip-on driver fit allow these tough, abrasion-resistant goatskin gloves to offer maximum comfort. The use of an Oilbloc™ treatment repels oil and water for a strong, steady grip, and a durable keystone thumb design extends their lifespan. As time goes by, you can expect these gloves to mold to your hand for a fit that’s even closer and more comfortable.
-
Clutch Gear® MXGKGHTVB
Product ID: MXGKGHTVBDexterous, high-visibility mechanic gloves with winter protection down to -20°C / -4°F
Thinsulate™ lining that warms hands in temperatures down to -20°C / -4°F optimizes these high-visibility goatskin gloves for work in icy winter conditions. They’re made from a tough, abrasion-resisting goatskin and feature extra back-of-hand protection to defend against knocks and bumps. Hook and loop closure tabs ensure a secure but comfortable fit and leather wrapping at the fingertips increases their lifespan.
-
Clutch Gear® MXGCEHVB
Product ID: MXGCEHVBImpact-blunting high visibility mechanics gloves
These goatskin mechanic gloves feature thermoplastic rubber patches at the back of the hand and fingers for outstanding impact resistance. Their split leather palm patches and reinforced thumb crotches increase durability, and wide elastic straps allow for an easy fit. Ergonomic shaping improves comfort, and flexible spandex give hands an outstanding range of movement. Thanks to their hi-viz backing, visibility won’t be an issue on the job site.
-
Clutch Gear® MXGCE
Product ID: MXGCEEconomical mechanics style gloves that are durable and flexible
Our Clutch Gear® MXGCE mechanics gloves are an economical choice for durability and freedom of hand movement. Featuring spandex back-of-hand and goat-skin palms with split cow-hide patches, they provide durability that remains flexible. Reinforced thumb crotch improves overall lifespan and protects against wear and tear when material handling.
-
Endura® 385CS
Product ID: 385CSHi-Viz gloves that can stop a chain saw dead in its tracks
These gloves can stop a chain saw running at 3140 feet per minute. How? Eight layers of woven DuPont™ Kevlar® fiber wrapped around a chainsaw’s drive sprocket halts it at the moment of contact. Afterwards, the gloves will have to be replaced—but your hand won’t. Water-resistant nylon backings ensure a tight, non-slip grip, and hi-viz backs improve visibility. Elasticized Velcro wrists secure the fit and keep debris at bay.
-
Endura® 66Q
Product ID: 66QHighly durable, split-leather fitter gloves
These durable fitter gloves don’t skimp on safety. They’re made from heavyweight split-leather and feature leather reinforcement at the palms, index fingers and thumbs. Gunn-cut styling eliminates exposed seams from the palm area, and slightly extended cuffs provide a higher zone of coverage.
-
Endura® 505KGWS
Product ID: 505KGWSArc/Stick welding gloves with full forearm protection and 360° cut resistance
Extra-long gauntlets provide these stick welding gloves with a generous amount of protection from heat and sparks, and their ParaActiv™ engineered yarn liner delivers 360° ANSI Level A5 cut protection, ANSI Level 5 puncture resistance, and and ANSI Level 2 heat resistance. Their choice cowhide construction, one-piece backs and wide thumb straps with split patches boost durability. Sewing thread is made with ParaActiv™ engineered yarn for added seam integrity.
-
Endura® 505BU
Product ID: 505BUDurable, extended gauntlet Stick/Arc welding gloves with superior heat protection
These gloves are made with choice, rugged cowhide selected from the shoulder-split for the highest level of durability. A wide thumb strap further reinforces durability. Sewing thread is made with Kevlar® fiber for added seam integrity and heat resistance. Extended gauntlet cuffs further safeguard hands from sparks and heat.
-
Endura® 399GKGL5
Product ID: 399GKGL5All-round fabrication and MIG welding glove with arc flash protection
Our Endura® 399GKGL5 goatskin gloves are ideal for MIG welding and all-round fabrication use. Made with material designed to resist flame, these gloves are arc flash-rated level 3 with an ATPV of 36 cal / cm² and feature ParaActiv™ thread for added seam integrity and durability. They also feature a ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A4 cut resistance and ANSI 3 heat protection while extended gauntlet cuffs provide extra wrist protection.
-
Endura® 378KGTVB
Product ID: 378KGTVBCold-rated multi-hazard protection with cut resistance, padded palms, and liquid resistance
Our Endura® 378KGTVB goatskin gloves protect against multiple types of hazards while keeping hands warm down to -20°C / -4°F. Ideal for outdoor cold protection, they feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A5 cut resistance and impact protection against knocks and bumps. These gloves are treated to resist water and liquids, while the padded palms provide vibration dampening and enhance comfort when material handling.
-
Endura® 378GOBBFC
Product ID: 378GOBBFCCrush-resistant finger protection with cut and impact resistance
Our Endura® 378GOBBFC driver gloves feature crush-resistant finger caps to protect from impacts, cuts, punctures, and laceration hazards. ParaActiv™ engineered yarn liner provides 360° cut protection with moderate ANSI A4 cut resistance and back-of-hand ANSI 2 impact resistance for protection against knocks and bumps. Treated to resist water and liquids, these gloves feature padded palms for comfort when material handling.
-
Endura® 378GKVSB
Product ID: 378GKVSBImpact and liquid resistant plus padded palms for material handling
Our Endura® 378GKVSB leather gloves resist liquid and protect against impact hazards. Featuring back-of-hand bumpers for ANSI 2 impact protection against knocks and bumps, they’re treated to resist water and liquids. Padded palms offer comfort when material handling.
-
Endura® 378GKGVBG
Product ID: 378GKGVBGCut-resistant impact protection with padded palms for material handling plus extended cuffs for wrist safety
Our Endura® 378GKGVBG feature padded palms for comfort when material handling and offer protection against cuts and impacts . TenActiv™ engineered yarn liner provides 360° cut resistance with ANSI A6 cut protection plus back-of-hand ANSI 2 impact resistance guards against knocks and bumps. Extended gauntlet cuffs provide additional wrist safety.
-
Endura® 375KGVB
Product ID: 375KGVBModerate cut resistance and impact protection with unpadded palms for better grip and feel
Our Endura® 375KGVB protect against cut hazards and are unpadded for better grip and sense of feel. ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance and incidental heat protection. Back-of-hand ANSI 2 impact resistance protects against knocks and bumps. The goatskin leather helps improve dexterity and durability for a longer wear life and has been treated to resist water and liquids.
-
Endura® 375GKGVB
Product ID: 375GKGVBImpact-resistance with 360° cut protection and vibration dampening
The ParaActiv™ engineered yarn lining within these tough goatskin driver gloves offers 360° ANSI Level A5 cut protection. Medium-duty impact-resistant back-of-hand protection safeguards hands with minimal effect on flexibility and dexterity. Gel pads at the palm counteract vibrations, and an Oilbloc™ treatment assures the highest level of oil and water resistance.
-
Endura® 375KGTVB
Product ID: 375KGTVBDriving gloves that offer exceptional grip and winter warmth down to -10°C / 14°F
The DuPont™ Kevlar® fiber/ composite filament lining within these tough liquid resistant goatskin driver gloves provides 360°ANSI Level A5 cut protection and ANSI Level 4 puncture protection. Thinsulate™ lining keeps hands warm in temperatures down to -10°C / 14°F. Reinforced materials at the back of the hand protect the grip without inhibiting freedom of movement. Testing places these gloves at an arc flash level 3 rating.
-
Endura® 375CSI
Product ID: 375CSIEconomic choice unlined gloves with grain leather palms for added dexterity, durability, and sense of feel
Our economic choice Endura® 375CSI leather gloves are unlined to provide a better sense of feel and hand motion. Cow grain leather palms improve durability and naturally resist liquids, while gauntlet cuffs provide extra wrist safety and allows for easier donning and removal.
-
Endura® 370GFKL
Product ID: 370GFKLMIG welding gloves with fine touch sensitivity
Our Endura® 370GFKL goatskin MIG welding gloves balance cut and heat protection with touch sensitivity. These gloves feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with low ANSI cut A2 cut resistance and ANSI 3 heat protection and spark resistance while extended gauntlet cuffs provide extra wrist protection.
-
Endura® 370CTIG
Product ID: 370CTIGTIG welding gloves with heat protection that balances flexibility and durability
Our Endura® 370CTIG TIG welding gloves are made from goatskin leather to provide an ideal balance between durability and hand motion that protect against sparks and heat. They provide ANSI 2 heat resistance and feature ParaActiv™ thread for added seam integrity and durability. Extended gauntlet cuffs provide extra wrist protection against heat and sparks.
-
Endura® 365HBR
Product ID: 365HBRHighly dexterous, durable TIG welding gloves that resist heat up to 140°C / 284°F
Built extra-tough from cowhide and featuring 4″ cowhide gauntlets that protect the wrists, these welding gloves provide a high level of protection while remaining highly flexible for precise work. They provide heat resistance in temperatures up to 140°C / 284°F. Sewing thread is made with Kevlar® fiber for added seam integrity that increases resistance to sparks and long lasting wear.
-
Endura® 365DLXFTL
Product ID: 365DLXFTLExtended cuff lineman gloves with lining that keep hands warm down to -10°C / 14°F
Our Endura® 365DLXFTL gloves feature lining for cold protection along with 6-inch cuffs with hi-viz bands for visibility and added protection. The Thinsulate™ lining keeps hands warm in cold temperatures down to -10°C / 14°F.
-
Endura® 365DLX6
Product ID: 365DLX6Lineman gloves with extended hi-viz cuffs
Our Endura® 365DLX6 lineman gloves feature a hi-viz 6-inch cuff for better visibility. Made from durable horse leather, they feature a double-leather palm patches in high-wear areas to protect against wear and tear and are treated to repel water, oil, and stains.
-
Endura® 365DLX2TL
Product ID: 365DLX2TLLineman gloves with short cuffs for improved range of motion and lining that keep hands warm down to -10°C / 14°F
Our Endura® 365DLX2TL gloves feature lining for cold protection along with 2-inch cuffs with hi-viz bands for visibility and improved range of motion. The Thinsulate™ lining keeps hands warm in cold temperatures down to -10°C / 14°F.
-
Endura® 365DLX2
Product ID: 365DLX2Lineman gloves with short 2-inch hi-viz cuffs
Our Endura® 365DLX2 lineman gloves feature a shorter 2-inch cuff that won’t get in the way when working in tight spaces or wearing clothing with bulky sleeves. Made from durable horse leather, they feature a double-leather palm patches in high-wear areas to protect against wear and tear. These gloves are treated to repel water, oil, and stains and feature hi-viz bands on the shorter cuffs for visibility.
-
Endura® 335DTIG
Product ID: 335DTigEnhanced dexterity and sense of touch for precise TIG welding
The fineness and flexibility of deerskin provides an enhanced sense of touch and optimal dexterity, which makes these gloves a perfect match for the most precise welding jobs. 4″ gauntlet cuffs and heat protection of up to 140°C / 284°F also ensures adherence to the highest safety standards. Sewing thread is made with Kevlar® fiber for added seam integrity. Equipped with strapped thumbs, these are durable, long-lasting gloves you can count on.
-
Endura® 335CBP
Product ID: 335CBPTIG welding gloves that can take the heat
These reverse cowhide TIG welding gloves feature reinforced back patches to maximize protection from sparks. Sewing thread is made with Kevlar® fiber for added seam integrity. Rated for heat resistance up to 260°C / 500°F, complete with strapped thumbs and an extended cowhide gauntlet, safety is at the heart of their design. Gunn-styling assures that these gloves are as comfortable as they are tough.
-
Endura® 76YBDQ
Product ID: 76YBDQEconomical fitter style gloves with loose fit for all-day wear
Our Endura® 76YBDQ are an economical choice for fitter style gloves, offering a loose fit for comfortable all-day wear. Leather cowhide palms improve durability while the cotton lining helps wick away sweat and provides breathability and comfort. Ideal for everyday tasks like material handling and general labor.
-
Endura® 76GR
Product ID: 76GRScrape and abrasion-resistant driver gloves with added forearm protection
These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. 4.25″ rubberized gauntlet cuffs increase their zone of coverage, and a light resistance to water and oil further boosts their versatility. The addition of an absorbent cotton palm lining keeps hands dry.
-
Endura® 76BFTL
Product ID: 76BFTLScrape and abrasion-resistant driver gloves that keep hands warm down to -15°C / 5°F
These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. A bandtop cuff allows hands to slide in and out with ease, and Thinsulate™ lining offers winter protection in temperatures down to -15°C / 5°F.
-
Emerald CX® SKWCPLP
Product ID: SKWCPLPHeat protection knit with cut resistance and leather palms for comfort and durability when handling hot material
Our Emerald CX® SKWCPLP string knit gloves feature leather palms and protect hands from heat and cut hazards. ParaActiv™ engineered yarn material provides 360° cut protection with ANSI A5 cut resistance and ANSI 3 heat protection. Leather palms offer improved durability and comfort, making them ideal for handling heavy metal parts and other hot objects.
-
Cool Grip® SCPSCLP
Product ID: SCPSCLPMetal fabrication and foundry gloves with cushioning for comfort when handling many hot parts
Our Cool Grip® SCPSCLP gloves are ideal for metal fabrication and foundry when handling hot parts for an extended amount of time. These cotton / nylon gloves feature durable leather palms with a SilaChlor® layer that provides ANSI 5 heat protection for the palms for sustained handling of handling hot material and painted parts. The ANSI A3 cut resistant leather palms also offer cushioning when carrying heavy parts and absorbs oil for better grip.
-
TenActiv™ SBTAKLP
Product ID: SBTAKLPTop level 360° cut resistance meets reinforced durability
A thin line construction provides these 10-gauge cut-resistant gloves with a high level of dexterity. Their steel reinforced TenActiv™ yarn provides 360° ANSI Level A9 cut protection, while premium side split leather palms increase their abrasion resistance. Sewn with ParaActiv™ thread for added seam integrity. Leather reinforcement at the thumb crotch greatly increases the gloves’ lifespan.
-
Emerald CX® S13KBGLP
Product ID: S13KBGLPTear-resistant gloves built to be as tough as the materials they handle
Tear-resistant goat-grain palms, reinforced thumb-crotches and DuPont™ Kevlar® fiber make these tough gloves ideal for handling metals. They provide 360° ANSI Level A5 cut protection and ANSI Level 4 puncture resistance and feature snug wrists for a secure fit. They’re also highly flexible and dexterous.
-
Endura® 398KGLBG
Product ID: 398KGLBGExtended gauntlet MIG welding gloves that stand up to heat, cuts and punctures
These highly dexterous MIG welding gloves don’t skimp on comfort or protection. They feature tough cowgrain palms and suede leather backs and cuffs. They’re complete with cushioned wrists and 6″ gauntlet cuffs for greater coverage. Their back-of-hand fleece lining ensures ANSI Level 2 heat resistance, and a DuPont™ Kevlar® fiber lining provides 360° ANSI Level A4 cut resistance and ANSI Level 4 puncture resistance.
-
Endura® 398GLBG
Product ID: 398GLBGHeat resistant, touch sensitive gloves for precise welding with an extended gaunlet cuff for extra protection
These MIG welding gloves are made from durable goatskin that provides the highest level of touch sensitivity and feature 6″ long gauntlet cuffs for extra protection Their suede leather backs and cuffs offer tough abrasion-resistance, and vibration-dampening padded palms ensure a steady grip. A fleece lining at the back of the hand provides ANSI Level 2 heat resistance. Sewing thread is made with ParaActiv™ fiber for added seam integrity.
-
Endura® 398GLBB
Product ID: 398GLBBHeat resistant, touch sensitive gloves for the most precise welding jobs
These MIG welding gloves are made from durable goatskin that provides the highest level of touch sensitivity. Their suede leather backs and cuffs offer tough abrasion-resistance, and vibration-dampening padded palms ensure a steady grip. A fleece lining at the back of the hand provides ANSI Level 2 heat resistance. Sewing thread is made with Kevlar® fiber for added seam integrity.
-
Endura® 378GOTTL
Product ID: 378GOTTLHi-Viz goatskin driver gloves that keep hands warm down to -25°C / -13F
These winterized, close-fitting driver gloves have hi-viz orange fingertips that improve safety by making hands and fingers highly visible even in trying conditions. They’re built from high-tensile, abrasion-resistant goatskin, and feature a keystone thumb design that maximizes durability. 100g of Thinsulate™ lining keeps hands warm and safe in temperatures down to down to -25°C / -13°F.
-
Endura® 378GOT
Product ID: 378GOTDurable goatskin driver gloves with hi viz fingertips
These close-fitting driver gloves feature hi-viz orange fingertips that improve safety by making hands and fingers highly visible even in trying conditions. They’re built from high-tensile, abrasion-resistant goatskin, and feature a keystone thumb design that maximizes durability.
-
Endura® 378GOBTL
Product ID: 378GOBTLOil and water resistant gloves that keep hands warm down to -15°C / 5°F
Built from tough goatskin and treated with Oilbloc™ for superior resistance to oil and water, these driver gloves combine a close, comfortable fit with outstanding durability. 100g of Thinsulate™ lining keeps fingers warm in temperatures down to -15°C / 5°F, and their elasticized backs maintain a snug fit.
-
Endura® 378GOBTKL
Product ID: 378GOBTKLCold-rated arc flash protection with cut resistance and liquid resistance
Our Endura® 378GOBTKL goatskin gloves keep hands warm down to -25°C / -13°F and are ideal for non-energized work where arc flash is present and resistance to liquids is a must. Made with material designed to resist flame, they are arc flash rated level 4 with an ATPV of 49 cal / cm², offer ANSI 2 heat resistance, and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A4 cut resistance. These gloves are liquid resistant and the palms are unpadded for steady grip and a better sense of feel when performing tasks.
-
Endura® 378GOBKL
Product ID: 378GOBKLArc flash-rated for non-energized work with cut protection and liquid resistance
Our Endura® 378GOBKL goatskin gloves are ideal for non-energized work where arc flash is present and liquid resistance is a must. Made with material designed to resist flame, they are arc flash-rated level 4 with an ATPV of 40 cal / cm², offer ANSI 3 heat resistance, and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A4 cut resistance. These gloves are treated resist water and liquids, while the palms are unpadded for steady grip and a better sense of feel when performing tasks.
-
Endura® 378GKTTL
Product ID: 378GKTTLComfortable, abrasion resistant gloves that keep hands warm down to -15°C / 5°F
A cut-and-sewn construction and elasticized backs allow these driver gloves to offer a close and comfortable fit. The natural abrasion-resistance of goatskin combined with a keystone thumb design ensures long-lasting durability, while a 100g Thinsulate™ lining keeps hands warm in temperatures down to -15°C / 5°F.
-
Endura® 378GKGTL
Product ID: 378GKGTLCut-resistant gloves with cold protection that keep hands warm down to -15°C / 5°F
Our Endura® 378GKGTL goatskin gloves provide protection from high cut hazards and keep hands warm down to -15°C / 5°F. Ideal for outdoor winter site clean-up and metal fabrication, these gloves feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A6 cut resistance and an additional Thinsulate™ liner for warmth and comfort in extreme cold.
-
Endura® 378GKTKL
Product ID: 378GKTKLDexterous leather gloves for protection against minor cut hazards
Our Endura® 378GKTKL gloves provide protection against minor cut hazards and offers a longer wear life while retaining dexterity. ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A3 cut resistance while supple goatskin leather offers better mobility and dexterity. A keystone thumb design maximizes durability for a longer wear life.
-
Endura® 378GKTFG
Product ID: 378GKTFGDurable arc flash-rated gloves with high cut protection for longer wear life
Our Endura® 378GKTFG gloves protect hands from flash fires and are made from premium goatskin for added durability and a longer wear life. Arc flash-rated level 3 with an ATPV of 36 cal / cm², they offer ANSI 3 heat resistance and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A5 cut resistance.
-
Endura® 378GKTA
Product ID: 378GKTADurable goatskin gloves for low hazard protection and material handling
Our Endura® 378GKTA gloves provide durable protection from scuffs and scrapes, making them ideal for material handling, light construction tasks, and low hazard site clean up. The keystone thumb design maximizes durability for a longer wear life while the elasticized wrists offer a snug fit for all day comfort.
-
Endura® 378GKGVBE
Product ID: 378GKGVBEEconomic choice for shutdown and turnaround maintenance
Our Endura® 378GKGVBE goatskin gloves protect hands from cut hazards and knocks and bumps, making them ideal for shutdown and turnaround maintenance. They feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A6 cut resistance, impact protection against knocks and bumps, and padded palms for vibration dampening and comfort when material handling.
-
Endura® 378GKGTVBE
Product ID: 378GKGTVBEVibration-dampening driver gloves with 360° cut resistance and winter protection down to -25°C / -13°F
These high-performing winter driver gloves are made from built-tough goatskin lined with Thinsulate™️ for winter protection in temperatures down to -25°C / -13°F. Their TenActiv™️ lining provides 360° ANSI Level A6 cut protection, and a padded palm reduces vibration to improve grip. Impact-resistant inserts at the back of the hand guard against knocks and bumps without compromising flexibly.
-
Endura® 378GKGE
Product ID: 378GKGEEconomic choice for flash fire protection with cut resistance
Our Endura® 378GKGE goatskin gloves are an economic choice that protects against arc flash, cuts, and flame. Made with material designed to resist flame, they are arc flash-rated level 3 with an ATPV of 36 cal / cm² and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with moderate ANSI A4 cut resistance.
-
Endura® 378CXGOB
Product ID: 378CXGOBMaximum cut-resistant leather for extreme cut hazards plus heat protection and liquid resistance
Our Endura® 378CXGOB leather gloves offer heat resistance and maximum protection against cut hazards. ParaActiv™ engineered yarn liner provides 360° cut protection with extreme ANSI A9 cut resistance and ANSI 3 heat protection. Treated to resist water and liquids.
-
Endura® 378AFL
Product ID: 378AFLClose-fitting, hard-wearing winter driving gloves
These winter driver gloves are made from tough cowgrain leather that resists abrasions, repels water and will form to the hands over time for a closer, comfortable fit. The keystone thumb design maximizes durability and dexterity, while elasticized backs make the fit snug yet flexible. A full fleece lining provides fingers with much-needed warmth in winter conditions.
-
Endura® 378A
Product ID: 378ADurable cowhide gloves for low hazard protection and material handling
Our Endura® 378A gloves provide durable protection from scuffs and scrapes, making them ideal for material handling, light construction tasks, and low hazard site clean up. The keystone thumb design maximizes durability for a longer wear life while the elasticized wrists offer a snug fit for all day comfort.
-
Endura® 365DLXDTL
Product ID: 365DLXDTLExtended cuff lineman gloves with double-weighted lining that keep hands warm down to -15°C / 5°F
Our Endura® 365DLXDTL gloves feature double-weighted lining for cold protection along with 6-inch cuffs with hi-viz bands for visibility and added protection. The Thinsulate™ lining keeps hands warm in cold temperatures down to -15°C / 5°F.
-
Endura® 365DLX2KG
Product ID: 365DLX2KGBuilt-tough lineman gloves with enhanced visibility
These heavy-duty cowgrain leather lineman gloves meet the ANSI/ISEA 107-2015 standard for high visibility, thanks to cuffs that feature 3M™ retroreflective silver strips accompanied by high-viz bands. Their water, oil and stain-resistant properties increase resilience, while ParaActiv™ fiber and split-leather at the cuffs make them highly durable. Performance patches at the thumb and palm add extra durability in critical high-wear areas.
-
Endura® 361DLXFTL
Product ID: 361DLXFTLCold-rated lineman mitts that keep hands warm down to -20°C / -4°F
Our Endura® 361DLXFTL lineman mitts are designed to keep hands warm in winter weather down to -20°C / -4°F. The combination of a claw design along with a Thinsulate™ liner provides both warmth and comfort in frigid temperatures. Made from durable horse leather, they feature double-leather palm patches in high-wear areas to protect against wear and tear. These mitts are treated to repel water, liquids, and stains and feature extended cuffs with hi-viz bands.
-
Endura® 304BOA
Product ID: 304BOADurable mitts built for extreme cold weather protection down to -35°C / -31°F
The solution to cold fingers lies inside these durable mitts built from tough cowgrain that offer protection in temperatures down to -35°C / -31°F. They’re lined with layers of pillow-soft insulation that trap heat inside and have elasticized wrists that prevent cold air from entering. As a bonus, a pair of helpful metal clips allow the mitts to be bound together when not in use.
-
Endura® 76B
Product ID: 76BFitter style gloves with loose fit and grain leather for comfort and all-day wear
Our Endura® 76B fitter style gloves are loose fitting for comfortable all-day wear. Grain leather palms improve dexterity and liquid resistance while the cotton lining helps wick away sweat for breathability and comfort. A bandtop cuff allows for easing donning and removal. Ideal for everyday tasks such as material handling and general labor.
-
Endura® 69BSKFFL
Product ID: 69BSKFFLDurable leather fitter style gloves with high cut protection
Our Endura® 69BSKFFL fitter style gloves offer protection against cut hazards and abrasion for a long wear life. TenActiv™ engineered yarn liner provides 360° cut protection with ANSI A5 cut resistance. They feature reinforced premium split-leather and are sewn with ParaActiv™ thread for added seam integrity to increase durability for a long wear life.
-
Endura® 66BRBOA
Product ID: 66BRBOADurable split-fitter gloves with extra wrist protection and a warm, winter-proof lining
These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers and are reinforced at the fingertips to offer a higher level of protection to the areas that need it most. Safety is further enhanced by knuckle straps and 2.5″ rubberized safety cuffs improve wrist protection while allowing for an easy fit. All-over lining provides warmth and comfort in cold conditions.
-
Endura® 66B
Product ID: 66BBuilt-tough, split-leather fitter gloves for rugged wear
These split-leather fitter gloves are built for heavy duty and rugged wear. They come equipped with leather palms and index fingers, are reinforced at the fingertips, and include knuckle straps to offer a higher level of protection for the areas that need it most. A gunn-cut pattern eliminates exposed seams in the hard-working palm area, and a cotton lining improves comfort while wicking away sweat.
-
Endura® 378GKGVB
Product ID: 378GKGVBMulti-hazard protection with liquid and water resistance for heavy machine operation and maintenance
Our Endura® 378GKGVB goatskin gloves provide multi-hazard protection for heavy machine operation and maintenance, where resistance to liquids is a must. Made with material designed to resist flame, they are arc flash-rated level 3 with an ATPV of 33 cal / cm², offer ANSI 5 heat resistance, and feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with ANSI A5 cut resistance. Treated to resist water and liquids, they feature impact protection against knocks and bumps and padded palms for comfort when material handling.
-
Clutch Gear® MXGCETFL
Product ID: MXGCETFLHere's how you handle the cold stuff - our Winter-lined Goatskin Mechanics Glove
Superior Glove was founded in Canada, so of course we know winter. Designed for harsh cold climates, these gloves feature a goatskin leather palm with split leather patches and thumb crotch for durability and excellent abrasion resistance. Thin, light, and warm C100 Thinsulate™ insulation helps our gloves achieve a -20C/-4F rating.
-
Endura® 378GOBDTK
Product ID: 378GOBDTKPuncture-resistant, oil and water repelling gloves for work in extreme cold
Intended for use in extreme cold, these driver gloves are made from a tough goat-grain leather that provides ANSI Level 4 puncture resistance. They feature a Thinsulate™ lining to keep hands warm in temperatures down to -30°C / -22°F. An Oilbloc™ treatment provides a high level of oil resistance while a Waterstop™ treatment repels oil, water and stains. Furthermore, a knitwrist turtleneck cuff extension locks in warmth.
-
Clutch Gear® MXGKGHVTL
Product ID: MXGKGHVTLHi-viz mechanic gloves for protection against cuts and cold temperatures down to -20°C / -4°F
Our hi-viz Clutch Gear® MXGKGHVTL gloves feature cut protection and cold resistance down to -20°C / -4°F without compromising dexterity and range of motion. The ParaActiv™ engineered yarn liner provides 360° cut protection with high ANSI A5 cut resistance. Leather wrapped fingertips and goat-skin palms provide improved durability.
-
Endura® 505BUWS
Product ID: 505BUWSDurable, extended gauntlet Stick/Arc welding gloves with superior heat protection
These gloves are made with choice, rugged cowhide selected from the shoulder-split for the highest level of durability. A wide thumb strap further reinforces durability. Sewing thread is made with ParaActiv™ fiber for added seam integrity and heat resistance. Extended gauntlet cuffs further safeguard hands from sparks and heat.
-
Endura® 378GKGDT
Product ID: 378GKGDTGeneral purpose protection against cuts plus cold protection down to -20°C / -4°F
Our Endura® 378GKGDT gloves keep hands warm down to -20°C / -4°F and offer cut protection plus oil resistance. The ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A5 cut resistance. Keystone thumb design helps improve durability without impeding dexterity, making it suitable for material handling.
-
Endura® 378GHVTL
Product ID: 378GHVTLHi-Viz built-tough gloves that provide winter protection down to -30°C / -22°F
These built-tough goatskin gloves provide ultimate visibility even in trying conditions thanks to yellow hi-viz and Scotchlite™ retro-reflective stripes on the back of the hand. Thinsulate™ lining ensures that hands stay warm in temperatures down to -30°C / -22°F . Elasticized backs make sure that the fit secure.
-
Endura® 378GAX
Product ID: 378GAXAbrasion resistant driver gloves crafted with comfort in mind
Stretchy Spandex backs make these driving gloves highly flexible and breathable. Their wing thumb design increases flexibility and provides a closer, more comfortable fit. Goatskin palms deliver a higher degree of abrasion resistance to the areas that need it most, and a gunn cut pattern increases the gloves’ lifespan by eliminating the need for seams in high-wear areas.
-
Action™ SKLP
Product ID: SKLPKnit with leather palms for comfort and durability that protect against cuts and punctures when material handling
Our Action™ SKLP string knit gloves feature leather palms for durable protection against cut and puncture hazards. ParaActiv™ engineered yarn material provides 360° cut protection with ANSI A5 cut resistance. Leather palms offer maximum ANSI 5 puncture resistance and helps improve durability and comfort. Ideal for handling heavy metal parts and other sharp objects.
-
Vibrastop™ VIBGV
Product ID: VIBGVThe ultimate in vibration dampening and abrasion protection
Featuring 60 grams of vibration dampening polymer at the palms and fingers, these high dexterity gloves are an excellent choice when working with pneumatic tools and repetitive impact machinery. An adjustable, padded 2.5″ wrist strap offers further abrasion resistance and wrist protection.
-
Endura® SPL4
Product ID: SPL4High coverage welder's spats that guard against sparks and heat
Built with welders in mind, these spats are sewn with DuPont™ Kevlar® fiber to protect feet, shins, and shoes from sparks and heat. They’re made from a heat-resistant side split leather and feature a wide elastic sole strap with a Velcro® closure for a fast, convenient fit. Their 6.5″ height provides a higher level of coverage for extra peace of mind.
-
Endura® 375GTVB
Product ID: 375GTVBWinter impact protection for temperatures down to -20°C / -4°F
These winter-ready driver gloves provide warmth down to temperatures of -20°C / -4°F. Tough goatskin leather treated with Oilbloc™ ensures top-notch oil resistance. They benefit from enhanced back-of-hand protection that dulls impact without impeding ease of movement, and the strategic placement of double-weight Thinsulate™ provides warmth where it’s needed most while ensuring mobility, flexibility and dexterity.
-
Endura® 365DLXTKG
Product ID: 365DLXTKGCut-resistant extended cuff lineman gloves that keep hands warm down to -15°C / 5°F
Our Endura® 365DLXTKG gloves offer cold protection and cut resistance along with 6-inch cuffs for added wrist protection. The ParaActiv™ engineered yarn liner provides 360° cut protection with ANSI A4 cut resistance along with hi-viz bands on cuffs for visibility. The Thinsulate™ lining keeps hands warm in cold temperatures down to -15°C / 5°F.
-
Endura® 361DLXWL
Product ID: 361DLXWLA one finger lineman mitt built tough for extreme cold (-45°C / -49°F)
These heavy-duty mitts built from specially selected horsehide leather are wool lined for warmth in temperatures down to -45°C / -49°F. Their gauntlet cuffs are marked by retroreflective silver strips and a hi-viz overlay to assure maximum visibility. Sewing thread is made with ParaActiv™ fiber for added seam integrity. A leather performance patch at the palm makes them extra-hard wearing, and a removable, washable lining makes it easy to keep them fresh and clean.
Superior Glove™, a leading Manufacturer & Wholesale Supplier of Work & Safety Gloves & Arm Sleeves. FREE SAMPLES. Wide Variety of Styles & Materials.
