Superior Glove™, a leading Manufacturer & Wholesale Supplier of Work & Safety Gloves & Arm Sleeves. FREE SAMPLES. Wide Variety of Styles & Materials.
Thin cut protection for better hand mobility plus steady wet grip when handling lightly oiled parts
Our cut-resistant TenActiv™ S13TAXFN gloves are thin for hand mobility and offer a steady wet grip. TenActiv™ engineered yarn material provides 360° cut protection with high ANSI A5 cut resistance while foam nitrile palm coating offers steady wet grip when handling lightly oiled parts. Ideal for metal fabrication and sheet metal handling tasks.
Metal-detectable food safe disposable gloves for accidental contamination detection
Our KeepKleen® RDNMD metal-detectable disposable gloves help reduce costs associated with accidental contaminations and food waste. A metal detector calibrated to standard sensitivity can detect pieces as small as 2 cm or 0.78? to prevent food waste shutdowns by adding and additional layer of control. They are CFIA and FDA compliant for safe food handling with texturized fingertips for steady grip.
Waterproof protection for handling extremely cold cryogens
Designed for use around cryogens, these waterproof gloves are insulated with 3M Thinsulate™ which allows them to withstand contact with dry ice for 267 seconds. RaoTex™ inserts prevent cryogens from soaking through to the skin and act as an added insulator, trapping body heat while allowing moisture to escape. An extended cuff increases the area of protection while a looser fit allows for easy removal in the event of contact with cryogens.
MIG welding gloves with zoned hypodermic protection on thumb and index finger to guard against tungsten welding wire injuries
Our Endura® 398OBPB MIG welding gloves feature double-layered maximum ANSI 5 hypodermic puncture protection on the thumb and index finger on the off-hand to guard against common welding wire injuries. The off-hand glove also features a single-layer palm liner for additional ANSI 3 hypodermic puncture protection. Both off-hand and tool-hand gloves are lined with ParaActiv™ engineered yarn for 360° cut protection with ANSI A4 cut resistance and ANSI 4 heat protection. Sewn with ParaActiv™ thread for added seam integrity and treated to resist water and liquids, these gloves feature padded palms and cuffs for comfort and protection when welding. Sold in left-handed (398OBPBLH) and right-handed (398OBPBRH) off-hand versions.
Medium-duty impact-resistant leather gloves with 360° cut protection
These medium-duty impact-resistant gloves feature a lining made with DuPont™ Kevlar® fiber, adding 360° cut resistance with ANSI Level A4 cut protection inside their durable leather shell. In addition, their non-padded palms provide more dexterity and tactility for everyday work where vibration hazards are not a concern.
Crush-resistant finger caps to protect fingers from pinch-point hazards
Our Endura® 378GOBFC gloves offer fingertip crush resistance to protect fingers from pinch-point hazards while still allowing flexibility and movement. Goatskin leather offers natural abrasion and a full cotton liner provides additional comfort. Treated to resist water and liquids, these gloves feature keystone thumb design to improve durability for a longer wear life.
Multi-hazard FR protection with flexible extreme impact resistance for hand movement plus cut and liquid protection
Our fire-resistant Endura® 378GKG4P gloves protect hands from multiple types of hazards, including arc flash, liquids, and cut risks plus their maximum impact protection is more flexible than typical comparable protection. Offering dual-hazard protection against flash fire and electrical arc flash, these gloves feature 4PRO™ back-of-hand bumpers for maximum ANSI 3 impact protection against knocks and bumps without sacrificing dexterity. ParaActiv™ engineered yarn liner provides 360° cut protection with high ANSI A5 cut resistance and are arc flash-rated level 3 with an ATPV of 35 cal / cm². They also feature padded palms for comfort when material handling and are treated to resist water and liquids.
Fire-resistant watch cap that is ultra soft and non-irritating for all-day comfort
This fire-resistant (FR) cap is designed for maximum comfort and all-day wear with a two-layer Kermel®-viscose blend that is non-irritating and feels soft against the skin. Even better, the beanie is made of a fabric with inherent FR properties that won’t diminish with laundering, allowing for easy refresh between uses. It’s an excellent choice for construction, mining, utility work, and jobs that involve oil and gas. It’s both NFPA 70E compliant and CAT2; Ebt 16 cal/cm².
Fire-resistant neck gaiter that is ultra soft and non-irritating for all-day comfort
This fire-resistant (FR) neck gaiter is designed for maximum comfort and all-day wear with a two-layer Kermel®-viscose blend that is non-irritating and feels soft against the skin. Even better, the fabric’s inherent FR properties won’t diminish with laundering, allowing for easy refresh between uses. It’s an excellent choice for construction, mining, utility work, and jobs that involve oil and gas. It’s both NFPA 70E compliant and CAT2; Ebt 16 cal/cm².
Non-irritating fire-resistant balaclava for reliable protection against fire hazards
Our SUPERA™ BAKVFR is a balaclava made with double layer Kermel®- viscose blend, protecting against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and ANSI CAT2; Ebt 16 cal/cm² rating, this balaclava is suitable for workers in industries where fire hazards exist such as construction, mining, and oil and gas.
Convenient glove clips to keep hand protection close by
Gloves that are out of reach are gloves that don’t get worn. These convenient clips can be fastened and worn on any belt loop to keep your gloves close by. They include a built-in magnetic breakaway that safely releases gloves in case of snags or catches, adding extra peace of mind.
Triple-layer gloves for high ANSI 5 heat protection
A triple-layer construction that features a Twaron® outer shell, a 100% cotton terry liner and a leather lined front and back provides high ANSI 5 heat resistance. Their 4″ leather gauntlet cuffs provide extra protection to keep wrists safe.
Food safe heavyweight baker's mitts with maximum heat protection
Our Cool Grip® TBMOB baker’s mitts are food safe and help protect hands against heat hazards. Made from heavyweight cotton, they provide maximum ANSI 5 heat protection and are fully lined for extra comfort and insulation. Treated to resist water and liquids, these gloves feature reinforced thumb crotch for protection against wear and tear. They’re CFIA-compliant for safe hood handling.
Black knit cut-resistant gloves that hide dirt and stains for longer wear life
Our TenActiv™ STAGBPU gloves are made from dark colored TenActiv™ engineered yarn to hide dirt and stains while protecting worker hands from cut hazards. The low-linting dark coloring allows these gloves to be used longer between laundering cycles, increasing their wear-life. They are ideal for work in unfinished or grimy environments where dirt is visible. Featuring moderate 360° cut protection with ANSI A4 cut resistance and polyurethane dipped palms for dry grip, they balance protection and comfort with a bare hand feel and dexterity.
Insulated maximum heat protection with cut resistance for plastic injection molding
Our Cool Grip® SPGC/A insulated gloves offer cut resistance and heat protection for plastic injection molding. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance and ANSI 4 heat protection . An acrylic liner adds comfort while the glove-within-a-glove design traps air and provides reliable insulation.
Double-coated gloves for liquid protection and cut resistance
Our Emerald CX® SCXPNTFC gloves are double-coated cut protection for water and liquid resistance. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A5 cut resistance while the full hand coating protects against liquid penetration. A double-layer ¾ micropore nitrile palm coating offers steady wet grip, making these gloves ideal for metal fabrication and glass manufacturing.
Silicone-free low-linting hi-viz orange gloves with cut protection for hand placement and worker visibility
Our hi-viz orange TenActiv™ S18TAGGFN gloves are silicone and low-linting, offering cut protection plus worker visibility and hand placement. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance. Their foam nitrile palms are non-marring and offer a steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel. They also feature a hi-viz orange shell for better hand visibility.
Silicone-free low-linting hi-viz green gloves with cut protection for hand placement and worker visibility
Our hi-viz green TenActiv™ S18TAGGFN gloves are silicone low-linting, offering cut protection plus worker visibility and hand placement. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance. Their foam nitrile palms are non-marring and offer a steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel. They also feature a hi-viz green shell for better hand placement and worker visibility.
Ultra-thin moderate cut protection for better hand movement with a bare hand feel and dry grip
Our TenActiv™ S18TAFGPU gloves protect against cut hazards and offer a bare hand feel with dry grip and outstanding dexterity. TenActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance, while their polyurethane palm coating offers steady dry grip and tactile feel. Ideal for small parts handling, their white shell helps spot dirt and contamination.
Low-linting ultra-thin cut protection with specially formulated non-marring palm coating for longer wear life
Our low-linting TenActiv™ S18TAFGNT gloves feature a specially formulated nitrile palm coating for better abrasion resistance to extend wear life. The non-marring nitrile palm coating provides steady wet grip that will not leave residue for product finishing. Made from TenActiv™ engineered yarn, they provide 360° cut protection with ANSI A4 cut resistance and their ultra-thin construction improves freedom of movement with a bare-hand feel.
Ultra-thin and versatile cut-resistant gloves for a wide range of tasks
Our versatile TenActiv™ S18TAFGFN gloves are ultra-thin and CFIA compliant with features for a wide range of operations. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance while their foam nitrile palms are non-marring and offer steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel.
Strong grip, cut-resistant, touchscreen compatible gloves
ANSI Level A3 cut protection, a grip-strengthening foam nitrile palm coating and a close, tactile feel allows these high-dexterity gloves to excel at handling small parts and completing precise tasks. They’re made with cut-resistant DuPont™ Kevlar® fiber and have been treated with an active agent to achieve a 99.9% antimicrobial status. They’re also touchscreen compatible for added convenience.
Cut resistant, versatile gloves with a strong grip and barehand feel
A high level of dexterity and ANSI Level A3 cut resistance optimizes these 15-gauge gloves for a wide variety of tasks. They’re made from a lint-free, continuous filament yarn and feature a polyurethane palm coating that provides a strong grip while allowing for a sensitive, bare-hand feel. Their ergonomic shaping, snug fit and breathable construction ensure all-day comfort.
Comfort and dexterity that protects against punctures and abrasion
These versatile gloves are proudly made in Canada from a cotton seamless knit shell that provides outstanding dexterity and comfort. A nitrile-dipped palm coating, which over time, forms to fit the user’s hand, offers ANSI Level 4 abrasion resistance and ANSI Level 2 puncture resistance. The nitrile palm coating features an additive to make them biodegradable.
