-
Endura® 378GOB
Product ID: 378GOBEasy-on goatskin gloves that resist oil and water
Elasticized backs and a slip-on driver fit allow these tough, abrasion-resistant goatskin gloves to offer maximum comfort. The use of an Oilbloc™ treatment repels oil and water for a strong, steady grip, and a durable keystone thumb design extends their lifespan. As time goes by, you can expect these gloves to mold to your hand for a fit that’s even closer and more comfortable.
-
TenActiv™ STAGHVPU
Product ID: STAGHVPUCut-resistant gloves that offer high visibility and a tactile touch
A hi-viz knit shell gives these gloves an outstanding level of visibility on job sites, and their stronger-than-steel TenActiv™ yarn ensures ANSI Level A5 cut protection. Their shell has been made lint-free to avoid contaminants, and a polyurethane coating at the palms provides fingers with a tactile feel.
-
Contender™ SBKG
Product ID: SBKGBlack knit cut-resistant gloves that hide dirt and stains for longer wear life
Our Contender™ SBKG gloves are made from dark colored ParaActiv™ engineered yarn to hide dirt and stains while protecting hands from cut hazards. Featuring 360° cut protection with high ANSI A5 cut resistance, they offer a bare hand feel, dexterity, and are ideal for work in unfinished or grimy environments where dirt is visible.
-
Clutch Gear® MXGKGHV
Product ID: MXGKGHVHi-viz mechanic gloves with cut protection for material handling and visibility
Our Clutch Gear® MXGKGHV gloves feature a TenActiv™ engineered yarn liner to provide 360° cut protection with high ANSI A5 cut resistance for material handling. These hi-viz gloves feature leather wrapped fingertips and palms plus a hook and loop wrist closure for a snug, comfortable fit.
-
Superior® MLNF
Product ID: MLNFLightweight, fully washable, lint-free painter's gloves
These painter’s gloves are made from a lint-free nylon that optimizes them for any application where dust or particles may pose a concern, or when surfaces must be protected from scratches, oils, and fingerprints. They’re lightweight, comfortable, and feature a slip-on fit for easy on and off. Fully launderable, they can be easily refreshed after messy jobs.
-
Superior® ML80
Product ID: ML80Reversible inspector gloves designed for durability and dexterity
Thanks to their heavyweight cotton blend fabric, these inspector gloves enjoy a greater degree of durability without sacrificing the dexterity needed for close product inspection. They’re designed to be hand-to-hand reversible for greater ease of use and will form to the hand for a closer fit.
-
Superior® ML40
Product ID: ML40Lightweight, reversible inspection gloves
Made from a lightweight cotton blend, these inspection gloves provide ample dexterity while preventing the skin’s natural oils from coming into contact with the product. They’re designed to be worn on either hand for easier on/off and can also be worn as a liner under disposable latex or rubber gloves to improve comfort and absorb sweat.
-
Superior® LL80
Product ID: LL80Women's fit cotton/poly inspector gloves for contamination prevention
These breathable medium weight inspectors gloves are designed to protect against fingerprints, hand oils, scratches, and other types of contamination. The cotton/poly jersey knit fabric is very form-fitting, and the slip-on style allows for easy donning. Hand-to-hand reversible, which helps to extend the life of the glove, they can also be worn as a liner beneath other gloves to soak up perspiration; especially effective when worn underneath rubber gloves. These gloves are also fully washable and can be No Bleached.
-
Ground Hog™ 14012GH
Product ID: 14012GHStatic grounding gloves that eliminates electrostatic paint spray-back while keeping hands protected
Our Ground Hog™ 14012GH cleanroom-processed gloves feature highly conductive continuous silver strips on palms that run from the inside of the glove to the outside to help ground workers and avoid paint spray-back. The lint-free laminated polyurethane fabric resists solvents and are cleanroom-processed to avoid shedding materials and prevent paint contamination. Made with latex-free materials to reduce the risk of allergies.
-
Endura® 66Q
Product ID: 66QHighly durable, split-leather fitter gloves
These durable fitter gloves don’t skimp on safety. They’re made from heavyweight split-leather and feature leather reinforcement at the palms, index fingers and thumbs. Gunn-cut styling eliminates exposed seams from the palm area, and slightly extended cuffs provide a higher zone of coverage.
-
Endura® 505KGWS
Product ID: 505KGWSArc/Stick welding gloves with full forearm protection and 360° cut resistance
Extra-long gauntlets provide these stick welding gloves with a generous amount of protection from heat and sparks, and their ParaActiv™ engineered yarn liner delivers 360° ANSI Level A5 cut protection, ANSI Level 5 puncture resistance, and and ANSI Level 2 heat resistance. Their choice cowhide construction, one-piece backs and wide thumb straps with split patches boost durability. Sewing thread is made with ParaActiv™ engineered yarn for added seam integrity.
-
Endura® 505BU
Product ID: 505BUDurable, extended gauntlet Stick/Arc welding gloves with superior heat protection
These gloves are made with choice, rugged cowhide selected from the shoulder-split for the highest level of durability. A wide thumb strap further reinforces durability. Sewing thread is made with Kevlar® fiber for added seam integrity and heat resistance. Extended gauntlet cuffs further safeguard hands from sparks and heat.
-
Endura® 399GKGL5
Product ID: 399GKGL5All-round fabrication and MIG welding glove with arc flash protection
Our Endura® 399GKGL5 goatskin gloves are ideal for MIG welding and all-round fabrication use. Made with material designed to resist flame, these gloves are arc flash-rated level 3 with an ATPV of 36 cal / cm² and feature ParaActiv™ thread for added seam integrity and durability. They also feature a ParaActiv™ engineered yarn liner that provides 360° cut protection with moderate ANSI A4 cut resistance and ANSI 3 heat protection while extended gauntlet cuffs provide extra wrist protection.
-
Endura® 375CSI
Product ID: 375CSIEconomic choice unlined gloves with grain leather palms for added dexterity, durability, and sense of feel
Our economic choice Endura® 375CSI leather gloves are unlined to provide a better sense of feel and hand motion. Cow grain leather palms improve durability and naturally resist liquids, while gauntlet cuffs provide extra wrist safety and allows for easier donning and removal.
-
Endura® 370GFKL
Product ID: 370GFKLMIG welding gloves with fine touch sensitivity
Our Endura® 370GFKL goatskin MIG welding gloves balance cut and heat protection with touch sensitivity. These gloves feature a ParaActiv™ engineered yarn liner to provide 360° cut protection with low ANSI cut A2 cut resistance and ANSI 3 heat protection and spark resistance while extended gauntlet cuffs provide extra wrist protection.
-
Endura® 370CTIG
Product ID: 370CTIGTIG welding gloves with heat protection that balances flexibility and durability
Our Endura® 370CTIG TIG welding gloves are made from goatskin leather to provide an ideal balance between durability and hand motion that protect against sparks and heat. They provide ANSI 2 heat resistance and feature ParaActiv™ thread for added seam integrity and durability. Extended gauntlet cuffs provide extra wrist protection against heat and sparks.
-
Endura® 365HBR
Product ID: 365HBRHighly dexterous, durable TIG welding gloves that resist heat up to 140°C / 284°F
Built extra-tough from cowhide and featuring 4″ cowhide gauntlets that protect the wrists, these welding gloves provide a high level of protection while remaining highly flexible for precise work. They provide heat resistance in temperatures up to 140°C / 284°F. Sewing thread is made with Kevlar® fiber for added seam integrity that increases resistance to sparks and long lasting wear.
-
Endura® 335DTIG
Product ID: 335DTigEnhanced dexterity and sense of touch for precise TIG welding
The fineness and flexibility of deerskin provides an enhanced sense of touch and optimal dexterity, which makes these gloves a perfect match for the most precise welding jobs. 4″ gauntlet cuffs and heat protection of up to 140°C / 284°F also ensures adherence to the highest safety standards. Sewing thread is made with Kevlar® fiber for added seam integrity. Equipped with strapped thumbs, these are durable, long-lasting gloves you can count on.
-
Endura® 335CBP
Product ID: 335CBPTIG welding gloves that can take the heat
These reverse cowhide TIG welding gloves feature reinforced back patches to maximize protection from sparks. Sewing thread is made with Kevlar® fiber for added seam integrity. Rated for heat resistance up to 260°C / 500°F, complete with strapped thumbs and an extended cowhide gauntlet, safety is at the heart of their design. Gunn-styling assures that these gloves are as comfortable as they are tough.
-
Endura® 76YBDQ
Product ID: 76YBDQEconomical fitter style gloves with loose fit for all-day wear
Our Endura® 76YBDQ are an economical choice for fitter style gloves, offering a loose fit for comfortable all-day wear. Leather cowhide palms improve durability while the cotton lining helps wick away sweat and provides breathability and comfort. Ideal for everyday tasks like material handling and general labor.
-
Endura® 76GR
Product ID: 76GRScrape and abrasion-resistant driver gloves with added forearm protection
These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. 4.25″ rubberized gauntlet cuffs increase their zone of coverage, and a light resistance to water and oil further boosts their versatility. The addition of an absorbent cotton palm lining keeps hands dry.
-
Endura® 76BFTL
Product ID: 76BFTLScrape and abrasion-resistant driver gloves that keep hands warm down to -15°C / 5°F
These driver gloves provide an outstanding level of scrape and abrasion resistance and are crafted from specially selected heavy-weight cowgrain leather that reinforces their palms, fingertips, index fingers and knuckle straps. A bandtop cuff allows hands to slide in and out with ease, and Thinsulate™ lining offers winter protection in temperatures down to -15°C / 5°F.
-
Superior® N10F
Product ID: N10FKeep it clean with lint-free nylon inspector glove
Meeting the needs of assembly line, cleanrooms, food handling and other industries, these lint-free, form-fitting gloves are designed for clean applications.
-
Emerald CX® SKWCPLP
Product ID: SKWCPLPHeat protection knit with cut resistance and leather palms for comfort and durability when handling hot material
Our Emerald CX® SKWCPLP string knit gloves feature leather palms and protect hands from heat and cut hazards. ParaActiv™ engineered yarn material provides 360° cut protection with ANSI A5 cut resistance and ANSI 3 heat protection. Leather palms offer improved durability and comfort, making them ideal for handling heavy metal parts and other hot objects.